中国机械工程 ›› 2015, Vol. 26 ›› Issue (19): 2625-2628.

• 机械基础工程 • 上一篇    下一篇

机械式点阵触觉显示系统

陈奕钪1,2;刘俊标1;李博1;郭少鹏1;霍荣岭1   

  1. 1.中国科学院电工研究所,北京,100190
    2.中国科学院大学,北京,100049
  • 出版日期:2015-10-10 发布日期:2015-10-10

Tactile Display System of Mechanical Dot Matrix

Chen Yikang1,2;Liu Junbiao1;Li Bo1;Guo Shaopeng1;Huo Rongling1   

  1. 1.Institute of Electrical Engineering,Chinese Academic of Sciences,Beijing,100190
    2.University of Chinese Academy of Sciences,Beijing,100049
  • Online:2015-10-10 Published:2015-10-10

摘要:

设计了一种用于视障人士电子阅读的机械式点阵显示系统。该系统通过小棘爪锁定显示针的不同位置以保持触点的状态,采用Z向驱动器配合XY移动平台顺序控制每个显示针的凸起,而后由复位驱动器统一复位,从而实现系统中多个触点的凸起和平整状态的自动切换。实验结果表明:采用单个Z向驱动器的系统可在1分钟内完成54个触点的凸起和平整状态自动转换。

关键词: 盲文显示器, 触觉显示, 三维显示, 小棘爪锁定机构

Abstract:

This paper proposed a tactile display system of mechanical dot matrix for the blind's electronic reading. The statuses of dots were kept by claws latching the different positions of the display pins, and the raise status of display pins were controlled by one Z axis actuator cooperating with XY mobile stage. Then all the display pins would be reset by the reset actuator, so that the statuses of dots might be interchanged automatically. The experimental results show that 54 dots can be automatically interchanged in 1 minute between upward and downward positions by using a Z axis actuator.

Key words: braille display device, tactile display, 3D display, latching mechanism with claw

中图分类号: