无传动间隙的3K行星齿轮减速器设计

doi:10.3969/j.issn.1004-132X.2024.01.003

中国机械工程 ›› 2024, Vol. 35 ›› Issue (01): 36-44,55.DOI: 10.3969/j.issn.1004-132X.2024.01.003

无传动间隙的3K行星齿轮减速器设计

王慰军1，2;杨桂林1，2;杜庆皓1，2，3;陈庆盈1，2

1.中国科学院宁波材料技术与工程研究所，宁波，315201
2.浙江省机器人与智能制造装备技术重点实验室，宁波，315201
3.中国科学院大学材料科学与光电技术学院，北京，100049

出版日期:2024-02-25 发布日期:2024-02-27
作者简介:王慰军，男，1981年生，高级工程师。研究方向为机器人技术及智能制造装备。E-mail：wangweijun@nimte.ac.cn。
基金资助:
国家自然科学基金重大研究计划（92048201）；国家自然科学基金（U21A20121）；浙江省重点研发计划（2022C01101）

Design of 3K Planetary Gear Reducers with No Backlash

WANG Weijun1，2;YANG Guilin1，2;DU Qinghao1，2，3;CHEN Qingying1，2

1.Ningbo Institute of Material and Engineering Technology，Chinese Academy of Science，Ningbo，
Zhejiang，315201
2.Zhejiang Key Laboratory of Robotics and Intelligent Manufacturing Equipment Technology，
Ningbo，Zhejiang，315201
3.College of Material Science and Opto-Electronic Technology，University of Chinese Academy of
Science，Beijing，100049

Online:2024-02-25 Published:2024-02-27

摘要/Abstract

摘要： 3K行星齿轮减速器的啮合齿轮副存在齿侧间隙，使得传动链中引入了传动间隙，导致传动精度降低以及换向冲击。为消除3K行星齿轮减速器的传动间隙，利用3K行星齿轮传动中行星架不参与力矩传递的特性，提出了一种柔性行星架以消除传动间隙，并通过仿真分析验证了所提消隙机构的有效性。通过配齿及效率优化实现了高效的正向和反向传动。研制样机并进行了传动精度、滞回特性、正弦响应误差、正向传动效率、反向传动效率以及反向启动扭矩测试，结果验证了所提柔性行星架对消除3K行星齿轮减速器传动间隙、提高传动精度和传动效率以及提高反向传动性能的有效性。

关键词: 3K行星齿轮减速器, 柔性行星架, 反向传动, 消隙, 协作机器人

Abstract: Due to the presence of clearances in the gearing of 3K planetary gear reducers， transmission clearances were introduced into the transmission chain， resulting in a decrease in transmission accuracy and causing impacts during driving direction changes. By utilizing the characteristics that the carrier did not participate in torque transmission in 3K planetary gear transmission， a flexible planetary carrier was innovatively proposed to eliminate clearances of 3K planetary gear reducers， and the effectiveness of the proposed clearance elimination mechanisms was verified through simulation analysis. Gear matching and efficiency optimization were performed to achieve high forward and backward driving efficiency. Through the development of a prototype and testing of transmission accuracy， hysteresis characteristics， sinusoidal response error， transmission efficiency， and reverse starting torque， the effectiveness of the proposed flexible planetary carrier in eliminating clearances， transmission accuracy improvement， transmission efficiency and reverse transmission performance promoting was verified.

Key words: , 3K planetary gear reducer, flexible carrier, back drivable, clearance elimination, collaborative robot

中图分类号:

TP242.6

王慰军, 杨桂林, 杜庆皓, 陈庆盈, . 无传动间隙的3K行星齿轮减速器设计[J]. 中国机械工程, 2024, 35(01): 36-44,55.

WANG Weijun, YANG Guilin, DU Qinghao, CHEN Qingying, . Design of 3K Planetary Gear Reducers with No Backlash[J]. China Mechanical Engineering, 2024, 35(01): 36-44,55.

参考文献

［1］OBA S， FUJIMOTO Y. Hybrid 3K Compound Planetary Reduction Gearbox with a Roller Transmission Mechanism［J］. IEEE/ASME Transactions on Mechatronics， 2022， 27（4）：2356-2366.
［2］CRISPEL S， GARCIA P L， SAERENS E， et al. A Novel Wolfrom-based Gearbox for Robotic Actuators［J］. IEEE/ASME Transactions on Mechatronics， 2021， 26（4）：1980-1988.
［3］ISHIDA T， TAKANISHI A. A Robot Actuator Development with High Back Drivability［C］∥2006 IEEE Conference on Robotics. Bangkok， 2006：1-6.
［4］DU Q， ZHANG T， YANG G， et al. A Review of Powered Back Drivability of Robot Actuators for Human-robot Interaction［C］∥2021 IEEE 16th Conference on Industrial Electronics and Applications. Chengdu， 2021：1115-1120.
［5］NABESHIMA C， AYUSAWA K， HOCHBERG C， et al. Standard Performance Test of Wearable Robots for Lumbar Support［J］. IEEE Robotics and Automation Letters， 2018， 3（3）：2182-2189.
［6］KOBUSE D， FUJIMOTO Y. Efficiency Optimization of High-reduction-ratio Planetary Gears for Very High-power Density Actuators［C］∥2016 IEEE 25th International Symposium on Industrial Electronics（ISIE）. Santa Clara， 2016：1240-1245.
［7］KANAI Y， FUJIMOTO Y. Torque-sensorless Control for a Powered Exoskeleton Using Highly Back-drivable Actuators［C］∥44th Annual Conference of the IEEE Industrial Electronics Society. Washington D C， 2018：5116-5121.
［8］MATSUKI H， NAGANO K， FUJIMOTO Y， et al. Bilateral Drive Gear—a Highly Back Drivable Reduction Gearbox for Robotic Actuators［J］. IEEE/ASME Transactions on Mechatronics， 2020， 24（6）：2661-2673.
［9］AI Xiaolan. Development of Zero-spin Planetary Traction Drive Transmission：Part 1—Design and Principles of Performance Calculation［J］. Journal of Tribology， 2002， 124（2）：386-391.
［10］许锦茂. 渐开线齿轮行星传动的设计与制造［M］. 北京：机械工业出版社， 2002.
XU Jinmao. Design and Manufacturing of Involute Gear Planetary Transmission［M］. Beijing：Mechanical Industry Press， 2002.
［11］OBA S， FUJIMOTO Y. 3K Compound Planetary Reduction Gearbox with Non-backlash Mechanism［C］∥IEEE 16th International Workshop on Advanced Motion Control（AMC）. Kristiansand， 2020：207-212.
［12］JIANG H， FU H， HAN Z， et al. Elimination of Gear Clearance for the Rotary Table of Ultra Heavy-duty Vertical Milling Lathe Based on Dual Servo Motor Driving System［J］. Applied Sciences， 2020， 10（11）：4050.
［13］KANAI Y， FUJIMOTO Y. Performance Analysis of Torque-sensorless Assist Control of a Powered Exoskeleton Using Highly Back-drivable Actuators［C］∥2019 IEEE 17th International Conference on Industrial Informatics. Helsinki， 2019：577-582.
［14］ZIMULDINOV E， BYKOV A， CLERSKIKH E， et al. Calculation and Development of 3k Planetary Gearbox with Non-standard Gear Modules［C］∥2020 4th International Conference on Electronics， Materials Engineering &Nano-technology（IEMENTech）. Kolkata， 2020：1-6.
［15］AKIYAMA N， FUJIMOTO Y. Highly Efficient 2K-H Compound Planetary Reduction Gearbox Using Balancer［C］∥Conference of the IEEE Industrial Electronics Society. Lisbon， 2019：669-674.
［16］饶振纲. 行星传动机构设计［M］. 北京：国防工业出版社， 1994.
RAO Zhengang. Design of Planetary Gear Mechanism［M］. Beijing：National Defense Industry Press， 1994.
［17］崔丽，秦大同，石万凯. 行星齿轮传动啮合效率分析［J］. 重庆大学学报（自然科学版）， 2006（3）：11-14.
CUI Li， QING Datong， SHI Wankai. Reference Efficiency of Planetary Gear Train［J］. Journal of Chongqing University（Natural Science）， 2006（3）：11-14.
［18］成大先. 机械设计手册（第五版，第3卷）［M］. 北京：化学工业出版社， 2008.
CHENG Daxian. Handbook of Mechanical Design（5th edition， vol3）［M］. Beijing：Chemical Industry Press， 2008.

[1]	王永强, 魏冰阳, 徐家科, 杨建军. 摆线针轮多齿啮合特性与承载接触分析方法[J]. 中国机械工程, 2023, 34(10): 1151-1158.
[2]	郑杰基, 陈凌宇, 范大鹏, 谢馨. 双电机精密传动机构消隙方法研究[J]. 中国机械工程, 2022, 33(22): 2684-2692.
[3]	江勇;张伟;刘晓源;金博丕. 双电机消隙技术在串联机械臂中的仿真与应用[J]. 中国机械工程, 2020, 31(16): 1991-1997.
[4]	房立金, 孙龙飞. 双电机驱动系统消隙特性研究[J]. 中国机械工程, 2012, 23(24): 2991-2996.

无传动间隙的3K行星齿轮减速器设计

Design of 3K Planetary Gear Reducers with No Backlash

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics