全参数化概念车身协同开发与快速化结构设计研究

中国机械工程 ›› 2014, Vol. 25 ›› Issue (6): 842-847.

全参数化概念车身协同开发与快速化结构设计研究

宋凯1;段利斌1;陈涛1,2;成艾国1

1.湖南大学汽车车身先进设计制造国家重点实验室,长沙,410082
2.汽车噪声振动和安全技术国家重点实验室,重庆,400039

出版日期:2014-03-26 发布日期:2014-04-11
基金资助:
国家高技术研究发展计划(863计划)资助项目(2012AA111802);广西科学研究与技术开发计划资助项目(桂科攻11107001-10,桂科攻11107001-09);汽车噪声振动和安全技术国家重点实验室2011年度开放基金资助项目(NVHSKL-201103)

Collaborative Development and Rapid Structural Design Based on Full Parametric Concept Car Body

Song Kai1;Duan Libin1;Chen Tao1,2;Cheng Aiguo1

1.State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body,Hunan University,Changsha,410082
2.State Key Laboratory of Vehicle NVH and Safety Technology,Chongqing,400039

Online:2014-03-26 Published:2014-04-11
Supported by:
National High-tech R&D Program of China (863 Program) （No. 2012AA111802）

摘要/Abstract

摘要：

针对汽车开发的概念设计阶段传统方法设计周期长、方案优化过程慢的问题，提出全参数化概念车身协同开发设计流程和快速化结构设计技术。建立了某公司系列车型参数化模型数据库;利用模块化建模技术,快速建立了某车型全参数化概念车身模型,并论证了该模型的计算精度满足工程实际要求。以某新车型白车身开发为例，论证了全参数化概念车身协同开发设计流程的高效性和快速化结构设计技术指导概念车身开发设计的可行性。

关键词: 全参数化概念车身, 协同开发, 模块化建模, 形状和尺寸优化, 多目标优化

Abstract:

The automobile industry today is facing the problem that use of the traditional method leads to a long design cycle and the slow process of program changes at the phase of conceptual design in vehicle developing process. To solve this problem, a procedure of collaborative development and design, together with rapid structural design technology for a full parametric concept car body, was introduced. Several kinds of parameterized parts database were built for the series models of a company. And a full parametric concept car body model was rapidly built using the modular modeling technique. It is proved that the accuracy of the model meets practical requirements. In the case of developing a body in white of a new vehicle, the high efficiency of the procedure of collaborative development and the feasibility of rapid structural design for the full parametric concept car body are demonstrated.

Key words: full parametric concept car body, collaborative development, modular modeling, shape and size optimization, multi-objective optimization(MOO)

中图分类号:

U463.8

宋凯, 段利斌, 陈涛, 成艾国. 全参数化概念车身协同开发与快速化结构设计研究[J]. 中国机械工程, 2014, 25(6): 842-847.

Song Kai, Duan Libin, Chen Tao, Cheng Aiguo. Collaborative Development and Rapid Structural Design Based on Full Parametric Concept Car Body[J]. China Mechanical Engineering, 2014, 25(6): 842-847.

参考文献

[1]侯文彬,张红哲,迟瑞丰,等.车身结构概念设计集成系统的实现[J].计算机集成制造系统,2009,15(2):240-244．
Hou Wenbin,Zhang Hongzhe,Chi Ruifeng,et al.Development of Integrated System for Conceptual Design of Vehicle Body Structure[J].Computer Integrated Manufacturing Systems,2009,15(2):240-244．
[2]徐涛,左文杰,徐天爽,等.概念车身框架结构的多变量截面参数优化[J].汽车工程,2010,32(5):394-398．
Xu Tao,Zuo Wenjie,Xu Tianshuang,et al.Parameter Optimization of Cross Section with Multiple Variables for the Frame Structure of Conceptual Car Body[J].Automotive Engineering,2010,32(5):394-398．
[3]Lyu N,Lee B,Saitou K.Optimal Subassembly Partitioning of Space Frame Structures for In-process Dimensional Adjustability and Stiffness[J].Journal of Mechanical Design,2006,128(3):527-535．
[4]宋凯,成艾国,胡朝辉,等.基于真实接头车身概念模型的结构优化[J].中国机械工程,2010,21(22):2764-2770．
Song Kai,Cheng Aiguo,Hu Zhaohui,et al.Design Optimization of Automotive Body Structure Based on Actual Joint Based Conceptual Model[J].China Mechanical Engineering,2010,21(22):2764-2770．
[5]Hilmann J,Paas M,Haenschke A,et al.Automatic Concept Model Generation for Optimization and Robust Design of Passenger Cars[J].Advances in Engineering Software,2007,38(11/12):795-801．
[6]史国宏,陈勇,姜欣,等.基于全参数化模型的白车身多学科设计优化[J].汽车工程,2010,32(11):928-932．
Shi Guohong,Chen Yong,Jiang Xin,et al.BIW Multidisciplinary Design Optimization Based on Full Parametric Model[J]. Automotive Engineering,2010,32(11）:928-932．
[7]Zinner H.SFE-CONCEPT Reference Manual v4.2[M].Berlin:SFE-GmbH,2010．
[8]Xu S.Use of Topology Design Exploration and Parametric Shape Optimization Process to Development Highly Efficient and Lightweight Vehicle Body Structure[C]//IABC 2007-World Auto Body Expo,International Automotive Body Congress(IABC). Berlin,2007:1-8.
[9]Hnschke A,Zhou S,Lee M,et al.Parametric Model Knowledgebase for Vehicle Design to Improve the Early Vehicle Attribute Assessments[C]//IABC 2007-World Auto Body Expo,International Automotive Body Congress (IABC). Berlin, 2007:1-17．
[10]Deb K,Pratap A,Agarwal S,et al.A Fast and Elitist Multi-objective Genetic Algorithm:NSGA-II[J].IEEE Transactions on Evolutionary Computation,2002,6(2):182-197．

[1]	李明磊, 贾育秦, 张学良, 刘丽琴, 杜娟, 温淑花, 兰国生. 基于多目标差异演化算法的并联机构结构优化 [J]. J4, 201016, 21(16): 1915-1920.
[2]	翁剑, 庄可佳, 浦栋麟, 丁汉, . 基于机器学习和多目标算法的钛合金插铣优化[J]. 中国机械工程, 2021, 32(07): 771-777.
[3]	倪恒欣, 阎春平, 陈建霖, 侯跃辉, 陈亮. 高速干切滚齿工艺参数的多目标优化与决策方法[J]. 中国机械工程, 2021, 32(07): 832-838.
[4]	刘锋, 李吉泉, 彭翔, 姜少飞. [成形过程仿真优化与集成计算材料工程]限定加热管布局的快速热循环注塑成形模具电加热系统优化[J]. 中国机械工程, 2020, 31(22): 2699-2707.
[5]	焦东风;刘志峰. 低成本低噪声的驱动桥零部件精度优化方法[J]. 中国机械工程, 2020, 31(20): 2505-2511.
[6]	童哲铭1；陈尧1；童水光1；余跃1；李进富2；郝国帅3. 基于NSGA-Ⅲ算法的低比转速离心泵多目标优化设计[J]. 中国机械工程, 2020, 31(18): 2239-2246.
[7]	刘世豪, 林茂. [综述]高速数控转台优化设计方法研究现状与展望[J]. 中国机械工程, 2020, 31(13): 1629-1637.
[8]	李益兵1,2;黄炜星1;吴锐1. 基于改进人工蜂群算法的多目标绿色柔性作业车间调度研究[J]. 中国机械工程, 2020, 31(11): 1344-1350,1385.
[9]	丁晓红;张俊;张横. 三点支撑T形床身机床垫铁位置多目标优化设计[J]. 中国机械工程, 2019, 30(21): 2615-2621.
[10]	应富强;马亮亮;汪内利. 叉车横置油缸式转向机构的设计与优化[J]. 中国机械工程, 2019, 30(19): 2329-2334,2341.
[11]	蔡宁;张则强;张颖;朱立夏. 资源约束下拆卸线平衡问题的建模与改进混合蛙跳算法[J]. 中国机械工程, 2019, 30(17): 2091-2099.
[12]	谢苗;李晓婧. 掘支锚联合机组支撑油缸多目标优化设计[J]. 中国机械工程, 2019, 30(16): 1976-1981.
[13]	罗钜;郭福水. 民用涡扇发动机总体多学科设计优化研究[J]. 中国机械工程, 2019, 30(15): 1813-1820.
[14]	张雷;赵希坤;蒋诗新;宋豪达. 低碳低成本约束下箱体零件加工路线优化方法[J]. 中国机械工程, 2018, 29(23): 2836-2844.
[15]	陈鸣, 朱海华, 张泽群, 金永乔, 王盈聪, 唐敦兵. [车间调度]基于信息素的多Agent车间调度策略[J]. 中国机械工程, 2018, 29(22): 2659-2665.