1Cr18Ni9Ti不锈钢车削加工中油膜附水滴冷却润滑技术研究

中国机械工程 ›› 2014, Vol. 25 ›› Issue (6): 747-750.

1Cr18Ni9Ti不锈钢车削加工中油膜附水滴冷却润滑技术研究

李文举1;王彪1;刘永姜1;刘国志1,2

1.中北大学,太原,030051
2.山西北方机械制造有限责任公司,太原,030051

出版日期:2014-03-26 发布日期:2014-04-11
基金资助:
高等学校博士学科点专项科研基金资助项目(20050204);山西省科技攻关项目(20080209ZX);山西省自然科学基金资助项目(2012011046-12）；中北大学自然科学基金资助项目

Study on Cooling and Lubrication Technology of Oil-on-water in Cutting 1Cr18Ni9Ti Stainless Steel

Li Wenju1;Wang Biao1;Liu Yongjiang1;Liu Guozhi1,2

1.North University of China,Taiyuan,030051
2.Shanxi North Machine-Building Co., Ltd.,Taiyuan,030051

Online:2014-03-26 Published:2014-04-11
Supported by:
Research Fund for the Doctoral Program of Higher Education of China（No. 20050204）;Shanxi Provincial Key Technology R&D Program（No. 20080209ZX）;Shanxi Provincial Natural Science Foundation of China（No. 2012011046-12）

摘要/Abstract

摘要：

通过对干切削、乳化液润滑、低温冷风切削和油膜附水滴润滑四种切削加工方式的对比试验,对油膜附水滴润滑的切削加工性能进行了研究。结果表明:与其他三种加工方式相比，采用油膜附水滴润滑时主切削力明显减小,加工工件表面质量明显提高,刀具磨损明显减小,证明了油膜附水滴润滑可以取得良好的冷却润滑效果。

关键词: 油膜附水滴(OoW), 绿色加工, 切削加工, 冷却润滑技术

Abstract:

The paper studied the oil-on-water(OoW) lubrication on its cutting performance via a contrast test that using four kinds of cutting methods i.e. dry cutting, emulsified liquid cutting, cryogenic gas cutting and OoW cutting. The results show that compared with the other three cutting methods, the main cutting force reduces obviously and the quality of the machined surface improves obviously and the wear of tools reduces significantly in the experiments using OoW lubrication.

Key words: oil-on-Water(OoW), green manufacture, cutting, cooling and lubrication technology

中图分类号:

TH16

李文举, 王彪, 刘永姜, 刘国志, . 1Cr18Ni9Ti不锈钢车削加工中油膜附水滴冷却润滑技术研究[J]. 中国机械工程, 2014, 25(6): 747-750.

Li Wenju, Wang Biao, Liu Yongjiang, Liu Guozhi, . Study on Cooling and Lubrication Technology of Oil-on-water in Cutting 1Cr18Ni9Ti Stainless Steel[J]. China Mechanical Engineering, 2014, 25(6): 747-750.

参考文献

[1]Shokrani A,Dhokia V,Newman S T.Environmentally Conscious Machining of Difficult-to-machine Materials with Regard to Cutting Fluids[J].International Journal of Machine Tools & Manufacture,2012,57:83-101．
[2]魏源迁,王新华,王爱玲,等.论生态加工液与零排放生产[J].金刚石与磨料磨具工程,2004(3):23-27.
Wei Yuanqian,Wang Xinhua,Wang Ailing,et al.Discussion About Eco-machining Fluids and Zero-emission Production[J]. Diamond & Abrasives Engineering,2004(3):23-27.
[3]苏宇,何宁,李亮.冷风切削对高速切削难加工材料刀具磨损的影响[J].摩擦学学报,2010,30(5):485-490.
Su Yu,He Ning,Li Liang.Effect of Refrigerated Air Cutting on Tool Wear in High-speed Cutting of Difficult-to-cut Materials[J]. Tribology,2010,30(5):485-490.
[4]周春宏,赵汀,姚振强.最少量润滑切削技术(MQL)——经济有效的绿色制造方法[J].机械设计与研究,2005,21(5):81-83.
Zhou Chunhong,Zhao Ting,Yao Zhenqiang.MQL-an Economical Solution to Sustainable Manufacturing with High Efficiency[J]. Machine Design and Research,2005,21(5):81-83.
[5]石世发,王彪,王栋,等.微量油膜附水冷却润滑技术在准干式深孔中的应用[J].煤矿机械,2011,32(7):123-124.
Shi Shifa,Wang Biao,Wang Dong,et al.Application of OoW in Quasi Dry Deep Hole Processing[J].Coal Mine Machinery, 2011, 32(7):123-124.
[6]Itoigawa F,Childs T H C,Nakamura T,et al.Effects and Mechanisms in Minimal Quantity Lubrication Machining of an Aluminum Alloy[J].Wear,2006,260(3):339-344．
[7]刘永姜,王爱玲,王彪,等.微量油膜水滴切削加工不锈钢的效果试验研究[J].现代制造工程,2010(2):9-12.
Liu Yongjiang,Wang Ailing,Wang Biao,et al.Experimental Study on the Effects of Oils on Water Machining Stainless Steel[J]. Modern Manufacturing Engineering,2010(2):9-12.
[8]魏源迁,钱怡,王爱玲,等.微量油膜附水滴切削液的研究[J].中国机械工程,2004,15(4):295-296.
Wei Yuanqian,Qian Yi,Wang Ailing,et al.Research on Cutting Fluids of Minimum Oils on Water[J].China Mechanical Engineering,2004,15(4):295-296.