基于点云数据的增材制造模型结构优化方法

doi:10.3969/j.issn.1004-132X.2023.20.011

中国机械工程 ›› 2023, Vol. 34 ›› Issue (20): 2482-2488.DOI: 10.3969/j.issn.1004-132X.2023.20.011

• 增材制造 • 上一篇

基于点云数据的增材制造模型结构优化方法

薛凯;郭润兰;黄晖阳;黄华

兰州理工大学机电工程学院，兰州，730050

出版日期:2023-10-25 发布日期:2023-11-20
通讯作者: 黄华（通信作者），男，1978年生，教授、博士研究生导师。研究方向为增材制造、数控技术与装备、机器人技术等。E-mail:hh318872@126.com。
作者简介:薛凯，男，1998年生，硕士研究生。研究方向为增材制造、结构优化。E-mail:1710154684@qq.com。
基金资助:
国家自然科学基金(52365057，51965037)

Structural Optimization Method of Additive Manufacturing Model Based on Point Cloud Data

XUE Kai;GUO Runlan;HUANG Huiyang;HUANG Hua

School of Mechanical and Electrical Engineering,Lanzhou University of Technology,Lanzhou,730050

Online:2023-10-25 Published:2023-11-20

摘要/Abstract

摘要： 增材制造因其逐层累加的特点，在进行结构优化时，需要考虑悬垂结构在成形过程中正确成形，避免在过程中形成冗余支撑结构。提出了一种三维模型结构优化方法，利用点云数据方法对三维模型进行处理获得其轮廓特征，将模型按照不同特征分割，针对其不同外部特征建立对应的内部椭球结构，同时在其内部重新构建自支撑结构，以保证优化后的结构成形过程中不会因为结构特殊而生成额外的支撑。实验结果表明，以四个不同特征模型为例，提出的方法在保证实体模型性能的前提下，平均减少了16.4%的成形时间及12%的材料成本。

关键词: 增材制造, 点云数据, 结构优化, 自支撑算法

Abstract: Due to the characteristics of layer by layer accumulation in additive manufacturing, it was necessary to consider the correct forming of overhanging structures in the forming processes to avoid the formation of redundant support structures in the structural optimization processes. An optimization method for 3D model structure was proposed herein. Firstly, the point cloud data method was used to process the 3D model to obtain the contour features. Then the model was divided according to different features. Finally, the corresponding internal ellipsoid structures were established according to different external features, and the self-supporting structures were rebuilt in the interior in order to ensure that the optimized structure molding process would not generate extra support because of the special structure. The experimental results show that the method proposed herein may reduce the molding time and material cost by 16.4% and 12% on average respectively on the premise of guaranteeing the performance of the solid model with four different characteristic models as examples.

Key words: additive manufacturing, point cloud data, structure optimization, self-supporting algorithm

中图分类号:

薛凯, 郭润兰, 黄晖阳, 黄华. 基于点云数据的增材制造模型结构优化方法[J]. 中国机械工程, 2023, 34(20): 2482-2488.

XUE Kai, GUO Runlan, HUANG Huiyang, HUANG Hua. Structural Optimization Method of Additive Manufacturing Model Based on Point Cloud Data[J]. China Mechanical Engineering, 2023, 34(20): 2482-2488.

参考文献

［1］STRANO G, HAO L, EVERSON R M, et al. A New Approach to the Design and Optimisation of Support Structures in Additive Manufacturing［J］. The International Journal of Advanced Manufacturing Technology, 2013, 66:1247-1254.
［2］DUMAS J, HERGEL J, LEFEBVRE S. Bridging the Gap:Automated Steady Scaffoldings for 3D Printing［J］. ACM Transactions on Graphics,2014,33(4):98.
［3］VANEK J, GALICIA J A G, BENES B. Clever Support:Efficient Support Structure Generation for Digital Fabrication［J］. Computer Graphics Forum, 2014, 33(5):117-125.
［4］沈振宏, 戴宁, 李大伟,等. 基于临界倾角约束的树形支撑结构生成算法［J］. 中国机械工程, 2016, 27(8):1107-1112.
SHEN Zhenhong， DAI Ning， LI Daiwei，et al. Tree Support Structure Generation Algorithm Based on Critical Inclination Constraint［J］. China Mechanical Engineering, 2016, 27(8):1107-1112.
［5］LU L, SHART A, ZHAO H, et al. Build-to-last:Strength to Weight 3D Printed Objects［J］.ACM Transactions on Graphics, 2014, 33(4):97.
［6］WANG W, WANG T Y, YANG Z, et al. Cost-effective Printing of 3D Objects with Skin-frame Structures［J］. ACM Transactions on Graphics, 2013,32 (6):177.
［7］王继东, 范丽鹏, 庞明勇. 面向三维打印的几何模型内部空间优化算法［J］. 计算机集成制造系统, 2018, 24(3):671-678.
WANG Jidong, FAN Lipeng, PANG Mingyong. Internal Space Optimization Algorithm of Geometric Model for 3D Printing［J］. Computer Integrated Manufacturing Systems, 2018, 24(3):671-678.
［8］徐洪飞, 黄章进, 宋鹏. 基于应力分布的 3D打印壳模型构造与优化［J］. 计算机系统应用, 2019, 28(10):103-111.
XU Hongfei, HUANG Zhangjing, SONG Peng. Construction and Optimization of 3D Printed Shell Model Based on Stress Distribution［J］. Computer System Application，2019, 28(10):103-111.
［9］桂馨. 考虑悬挑角度和最小尺寸约束的自支撑结构拓扑优化［D］.武汉：华中科技大学,2018.
GUI Xin. Topology Optimization of Self-supporting Structures Considering Overhang Angle and Minimum Size Constraints［D］. Wuhan:Huazhong University of Science and Technology, 2018.
［10］WANG X, ZHANG C, LIU T. A Topology Optimization Algorithm Based on the Overhang Sensitivity Analysis for Additive Manufacturing［J］. IOP Conference Series:Materials Science and Engineering, 2018, 382(3):032036.
［11］ZOU J, ZHANG Y, FENG Z. Topology Optimization for Additive Manufacturing with Self-supporting Constraint［J］. Structural and Multidisciplinary Optimization, 2021, 63:2341-2353.
［12］EMIEL V D V, MAAS R, AYAS C, et al. Continuous Front Propagation-based Overhang Control for Topology Optimization with Additive Manufacturing［J］. Structural & Multidisciplinary Optimization, 2018, 57(5):2075-2091.
［13］LEE M, FANG Q, CHO Y, et al. Support-free Hollowing for 3D Printing via Voronoi Diagram of Ellipses［J］. Computer-Aided Design, 2017, 101:23-36.
［14］TAREEN S A K, SALEEM Z. A Comparative Analysis of SIFT, SURF, KAZE, AKAZE, ORB, and BRISK［C］∥2018 International Conference on Computing, Mathematics and Engineering Technologies (iCoMET). Sukkur, 2018:17732676.
［15］CHOI S, RYU J, LEE M, et al. Support-free Hollowing with Spheroids and Efficient 3D Printing Utilizing Circular Printing Motions Based on Voronoi Diagrams［J］. Additive Manufacturing, 2020, 35:101254.
［16］AIGER D, MITRA N J, COHEN-OR D. 4-points Congruent Sets for Robust Pairwise Surface Registration［J］. ACM Transactions on Graphics, 2008,27(3):1-10.
［17］LUO Y, SIGMUND O, LI Q, et al. Additive Manufacturing Oriented Topology Optimization of Structures with Self-supported Enclosed Voids［J］. Computer Methods in Applied Mechanics and Engineering,2020,372(3):116-118.

[1]	刘杰, 翦林杰, 窦泽城, 文桂林, 王锐坤, 李方义. 超细微穿孔板构筑轻质结构的吸声特性研究[J]. 中国机械工程, 2023, 34(20): 2395-2402.
[2]	柯庆镝, 罗俊友, 蒋守志, 黄海鸿, . 基于涂层材料分布状态的超声应力反演模型构建[J]. 中国机械工程, 2023, 34(18): 2230-2237.
[3]	刘英杰, 胡强, 赵新明, 张少明, 黄帅, 王永慧. 汽车发动机连接支架拓扑优化及增材制造研究[J]. 中国机械工程, 2023, 34(18): 2238-2267.
[4]	王磊, 邬宇梁, 赵纪元, , 卢秉恒, . 增材制件内流道精整加工技术研究进展[J]. 中国机械工程, 2023, 34(07): 757-769.
[5]	方学伟, 蒋笑, 王喆, 武晓康, 黄科. ER120S-G高强钢电弧增材制造的工艺优化[J]. 中国机械工程, 2023, 34(02): 218-225.
[6]	何宇凡, 孙江宏, 高锋, 李乃峥, 何雪萍, 王军见. 一种针对圆锥体外表面贴装的机械手设计分析与优化[J]. 中国机械工程, 2023, 34(01): 55-64.
[7]	韩光超, , 杨家凯, 叶泽玖, 徐林红, 张海鸥, 杨海涛. 电弧微铸锻增材制造AlMgSc合金纵扭复合超声振动干铣削加工特性研究[J]. 中国机械工程, 2022, 33(24): 2971-2979,2989.
[8]	孟亮, 仲明哲, 李文彪, 夏凉, 高彤, 朱继宏, 张卫红, . 面向增材制造的航空发动机外部系统支架拓扑优化设计[J]. 中国机械工程, 2022, 33(23): 2822-2832.
[9]	邹无有, 杜纯, 艾建平, 单斌. 面向催化剂载体应用的TiO2多孔陶瓷结构优化设计[J]. 中国机械工程, 2022, 33(23): 2833-2843.
[10]	焦晨, 晁龙, 朱磊, 沈理达, 梁绘昕, 戴宁, 王长江, 孙骏. 面向骨科植入物的仿生多孔结构设计与制造方法[J]. 中国机械工程, 2022, 33(23): 2844-2850.
[11]	王新, 陈耕, 刘峰, 余晨帆, 张乐乐, . 航天器密封舱结构的安定分析与优化[J]. 中国机械工程, 2022, 33(20): 2502-2508.
[12]	何智成, 杨丁丁, 姜潮, 伍毅, 江和昕. 基于增材制造各向异性的强度约束拓扑优化[J]. 中国机械工程, 2022, 33(19): 2372-2380，2393.
[13]	熊晓晨, 秦训鹏, 华林, 胡泽启, 纪飞龙, . 复合式增材制造技术研究现状及发展[J]. 中国机械工程, 2022, 33(17): 2087-2097.
[14]	仲杨, 秦晓波, 郑志镇, 李建军, 王承. 石化容器用2.25Cr-1Mo-0.25V钢的CMT电弧熔丝增材制造工艺及组织性能研究[J]. 中国机械工程, 2022, 33(10): 1251-1259.
[15]	田雪雪, 赵纪元, 卢秉恒, 王磊. 增材制件内部缺陷埋藏深度的激光超声定量检测[J]. 中国机械工程, 2022, 33(08): 952-959.

基于点云数据的增材制造模型结构优化方法

Structural Optimization Method of Additive Manufacturing Model Based on Point Cloud Data

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics