中国机械工程 ›› 2021, Vol. 32 ›› Issue (19): 2294-2304.DOI: 10.3969/j.issn.1004-132X.2021.19.003

• 机械基础工程 • 上一篇    下一篇

底盘构件多轴随机载荷下高周疲劳准则研究

董国疆1,2;张猛1;魏留伟1;张永强1   

  1. 1. 河北省特种运载装备重点实验室(燕山大学),秦皇岛,066004
    2. 先进锻压成形技术与科学教育部重点实验室(燕山大学),秦皇岛,066004
  • 出版日期:2021-10-10 发布日期:2021-11-04
  • 作者简介:董国疆,男,1978年生,教授、博士研究生导师。研究方向为车用高强铝板壳构件成形性能及工艺底盘构件动力学数值仿真及疲劳损伤分析。E-mail:dgj@ysu.edu.cn。
  • 基金资助:
    国家自然科学基金(51775481)

Study on High Cycle Fatigue Criteria under Multi-axial Random Loads of Chassis Parts

DONG Guojiang 1,2;ZHANG Meng1;WEI Liuwei1;ZHANG Yongqiang1   

  1. 1.Hebei Key Laboratory of Special Delivery Equipment(Yanshan University),Qinhuangdao,Hebei,066004
    2. Key Laboratory of Advanced Forging & Stamping Technology and Science of Ministry of Education of China(Yanshan University),Qinhuangdao,Hebei,066004
  • Online:2021-10-10 Published:2021-11-04

摘要: 为探明汽车底盘构件在随机载荷下多轴高周疲劳准则的应用方法与寿命预测规律,以某品牌B级轿车为研究对象,通过采集试验场强化路轮心六分力信号,建立了整车多体动力学模型,应用虚拟迭代法获取转向节与其他零件连接点的载荷时间历程;建立转向节有限元模型,通过模态仿真与试验验证了有限元模型的准确性;提取了von Mises应力下寿命值最小节点的应力分量时间历程;研究了8种高周疲劳准则所基于的3种类型临界平面的计算方法,通过多轴循环计数提取临界面上正应力幅与剪应力幅,并计算不同准则对应的等效应力幅,总结幅值分布与寿命预测规律。研究结果表明,在幅值分布与寿命预测方面,Zhang-Yao准则的等效剪应力幅值整体偏大,预测寿命为1.09×105周次,较其他准则偏于保守;McDiarmid准则的大应力幅仅占3.4%,预测寿命为1.25×106周次,明显大于其他准则的预测寿命值,而改进的McDiarmid准则预测寿命值明显减小。在计算成本方面,von Mises准则无需提取临界面与多轴循环计数,应用最为便捷;Findley准则提取临界面过程需要计算所有平面的正应力与剪应力数据,故计算成本最高。

关键词: 随机载荷, 多轴循环计数, 临界平面, 高周疲劳准则, 等效应力幅

Abstract: In order to find out the application method and life prediction pattern of the multi-axial high cycle fatigue criteria under random loads, based on a brand B-class car, the wheel center six component force signals of test field strengthening road were collected, and the dynamics model of the vehicle multi-body was established, and the virtual iteration method was used to obtain the load time of the knuckle and the connecting points of other parts. The finite element model of knuckle was established, and the accuracy of the finite element model was verified by modal simulation and modal test. The stress component time history was extracted for the node with the minimum lifetime value under von Mises stress. Three type critical plane calculation methods of eight high cycle fatigue criteria were studied, and the normal stress amplitude and shear stress amplitude of the critical surfaces were extracted by multi-axis cycle counting, and the equivalent stress amplitudes of different criteria were calculated, and the prediction rules of amplitude distribution and life expectancy were summarized. The results show that for the amplitude distribution and life prediction, the equivalent shear stress amplitude of the Zhang-Yao criterion is large, and the prediction life is as 1.09×105 times, which is more conservative than that of other criteria. The large stress amplitude of McDiarmid criterion only accounts for 3.4%, the predicted life is as 1.25×106 times, significantly higher than that of other criteria, and the prediction life value of improved McDiarmid criterion is significantly reduced. For the calculation cost, the von Mises criterion does not need to extract the critical surface and the multi-axis cycle count, so the applications are the most convenient. Findley criterion extraction critical surface processes require the calculation of normal and shear stress data for all planes, so the calculation cost is highest.

Key words: random load, multi-axis cycle count, critical plane, high cycle fatigue criterion, equivalent stress amplitude

中图分类号: