[成形过程仿真优化与集成计算材料工程]塑性加工摩擦定律的研究进展

doi:10.3969/j.issn.1004-132X.2020.22.007

摘要/Abstract

摘要： 塑性加工一般采用润滑油或固体润滑膜对工件进行润滑处理，干摩擦定律作为理解润滑条件下的摩擦行为的基础，可通过类金刚石镀膜镀层模具与板材进行侧拉摩擦试验和高面压摩擦试验来确定。对固体润滑膜下的摩擦定律进行了研究，最后基于干摩擦定律与侧拉摩擦试验，提出了油润滑条件下的摩擦定律。

关键词: 塑性加工, 摩擦定律, 干摩擦, 润滑

Abstract: In metal forming, liquid lubricants and lubrication coatings were generally employed. Based on the understanding of friction behaviors under lubricated conditions, the friction law under dry conditions was determined by experimental results in the side stretching friction tests and the high pressure friction tests with a diamond-like carbon(DLC) coated friction tool. Then the friction law of lubrication coatings was investigated. Finally, the friction law under lubricated conditions was proposed based on the friction law under dry conditions and experimental results obtained by the side stretching friction tests.

Key words: metal forming, friction law, dry friction, lubricant

中图分类号:

TG164.2

王志刚, 吉川泰晴, 董文正, . [成形过程仿真优化与集成计算材料工程]塑性加工摩擦定律的研究进展[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2020.22.007.

WANG Zhigang, YOSHIKAWA Yasuharu, DONG Wenzheng, . State-of-the-art of Friction Law in Metal Forming[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2020.22.007.

参考文献

［1］BAY N, AZUSHIMA A, GROCHE P, et al. Environmentally Benign Tribo-systems for Metal Forming［J］. CIRP Annals, 2010, 59(2):760-780.
［2］KADA O, WANG Z G, MIYANISHI K, et al. Evaluation of Anti-galling Ability of Zinc Phosphate Coating by Backward Extrusion of Cylindrical Cup［J］. Journal of Materials Processing Technology, 2020, 285：116765.
［3］BAY N, WANHEIM T. Real Area of Contact and Friction Stress at High Pressure Sliding Contact［J］. Wear, 1976, 38:201-209.
［4］NIELSEN C V, BAY N. Review of Friction Modeling in Metal Forming Processes［J］. Journal of Materials Processing Technology, 2018, 255:234-241.
［5］MERKLEIN M, ALLWOOD J M, BEHRENS B A, et al. Bulk Forming of Sheet Metal［J］. CIRP Annals, 2012, 61(2)：725-745.
［6］WANG Z G, HIRASAWA K, YOSHIKAWA Y, et al. Forming of Light-weight Gear Wheel by Plate Forging［J］. CIRP Annals, 2016, 65(1)：293-296.
［7］WANG Z G, HAKOYAMA T, ENDO Y, et al. Application of Flow Model in Metal Cutting to Cold Forging of Tubular Products［J］. CIRP Annals, 2019, 68(1)：273-276.
［8］WANG Z G, YOSHIKAWA Y, OASKADA Y, et al. A New Forming Method of Solid Bosses on a Cup Made by Deep Drawing［J］. CIRP Annals, 2013, 62(1)：291-294.
［9］WANG Z G, YOSHIKAWA Y. A New Forming Method of Triple Cup by Plate Forging［J］. Procedia Engineering, 2014, 81：389-394.
［10］TAMAOKI K. Development and Practical Use of Dry Deep Drawing［J］. Journal of JSTP, 2008, 49(575)：1166-1167.
［11］WANG Z G. Tribological Approaches for Green Metal Forming［J］. Journal of Materials Processing Technology, 2004, 151(1/3):223-227.
［12］WANG Z G, YOSHIKAWA Y, SUZUKI T, et al. Determination of Friction Law in Dry Metal Forming with DLC Coated Tool［J］. CIRP Annals, 2014, 63(1)：277-280.
［13］NAKAMURA T. A Study of the Lubrication Behavior of Solid Lubricants in the Upsetting Process［J］. Journal of Tribology, 2000, 122(4)：803-808.
［14］WANG Z G, SUZUKI T. Friction Law in Dry Metal Forming of Materials with Work Hardening［J］. Procedia Manufacturing, 2018, 15：475-480.
［15］WANG Z G, KOMIYAMA S. New Cold Forging Lubricant Replacing Zinc Phosphate Coating［M］∥TEKKAYA A E. 60 Excellent Inventions in Metal Forming. Berlin:Springer, 2015：343-348.
［16］WANG Z G, KOMIYAMA S, YOSHIKAWA Y, et al. Evaluation of Lubricants without Zinc Phosphate Precoat in Multi-stage Cold Forging［J］. CIRP Annals, 2015, 64(1)：285-288.
［17］KADA O, WANG Z G. Lubricating Performance of Residual Zinc Phosphate Coating on Forged Specimen in Bowden-Leben Sliding Test［J］. Key Engineering Materials, 2018, 767:124-130.
［18］KASUGA Y. Boundary Lubrication under High Normal Pressures［J］. Journal of JSLE, 1970, 16:748-758.
［19］AZUSHIMA A. Direct Observation of Contact Behaviour to Interpret the Pressure Dependence of the Coefficient of Friction in Sheet Metal Forming ［J］. CIRP Annals, 1995, 44(1)：209-212.
［20］WANG Z G, DONG W Z, OSAKADA K. Determination of Friction Law in Metal Forming under Oil-lubricated Condition［J］. CIRP Annals, 2018, 67(1)：257-260.
［21］ZHANG Y, WANG Z G, YOSHIKAWA Y, et al. Experimental Investigation on Friction Law under Starved Lubrication in Metal Forming［J］. Procedia Engineering, 2017, 207：2269-2273.
［22］WANG Z G, KOZAKAI Y. Effect of Friction History of Workpiece on Friction Behaviour in Metal Forming［J］. IOP Conference Series：Materials Science and Engineering， 2019, 544(1)：012024.

[1]	李永康1，2;王军1;廉自生1，2. 混合润滑条件下的斯特封高速摩擦与密封特性[J]. 中国机械工程, 2021, 32(05): 533-539.
[2]	孔晓瑶1,2;袁松梅1,2;朱光远1,2;张文杰1,2. 微量润滑系统参数对雾化特性的影响[J]. 中国机械工程, 2021, 32(05): 579-586.
[3]	徐鲁帅1;王赟磊1;张帆1;郝木明2;袁小阳1. 螺旋槽机械密封瞬态启动过程润滑特性[J]. 中国机械工程, 2020, 31(16): 1891-1900.
[4]	徐增闯, 崔维鑫, 郝丽春, 梁宇翔, 郑伟波. 空间用合成碳氢润滑油的长寿命润滑特性分析[J]. 中国机械工程, 2020, 31(15): 1793-1797.
[5]	赵兵, 张守阳, 王辉, 吴动波, 乔廷强, 黄鑫. [装配技术]九级盘装配连接螺栓预紧力评估与分析[J]. 中国机械工程, 2020, 31(13): 1570-1576.
[6]	欧阳武1,2,3;程启超1,2;金勇1,2;刘正林1,2;刘旭康1,2;王斌1,2. 基于熵权模糊综合评价法的水润滑尾轴承性能评估[J]. 中国机械工程, 2020, 31(12): 1407-1414.
[7]	林棻1；唐洁1；赵又群1；李剑垒1；臧利国2；陈宇珂1. 基于修正L-P模型的轮毂轴承载荷分布与弯曲疲劳寿命分析[J]. 中国机械工程, 2020, 31(08): 898-906.
[8]	刘思远1,2;王广达1,2;孙红梅3;刘建勋4;姜万录1,2. 基于润滑机理的智能液压元件本体性能预测方法[J]. 中国机械工程, 2020, 31(08): 952-959.
[9]	谭新峰, 雒建斌. [学科发展]润滑研究进展[J]. 中国机械工程, 2020, 31(02): 145-174,189.
[10]	秦利;徐智颖;刘福才;徐继龙. 考虑关节固体润滑的在轨装配机械臂振动特性及优化控制[J]. 中国机械工程, 2019, 30(24): 2986-2993,3003.
[11]	王楠1,2,3;杨利涛1,2;梁应选1,2;王鹏1,2;岳晓奎3. 非接触式电磁加载水润滑轴承监测系统[J]. 中国机械工程, 2019, 30(24): 3004-3009.
[12]	张高峰;李景焘;王志刚;陈文新. 低温冷风纳米粒子微量润滑磨削轴承钢试验研究[J]. 中国机械工程, 2019, 30(19): 2342-2348.
[13]	李彪1;孙军2;朱少禹2;付杨杨2;苗恩铭3;李云强4;朱桂香4. 计及轴颈轴向运动的径向滑动轴承润滑分析[J]. 中国机械工程, 2019, 30(18): 2150-2155,2163.
[14]	郭飞飞1;金守峰1;秦立果2;董光能2. 类金刚石膜在水环境下的摩擦学行为[J]. 中国机械工程, 2019, 30(18): 2206-2210.
[15]	沈锦龙1;薛正堂2;衡传富2;刘小君1. 点接触弹流润滑条件下表面弹性变形研究[J]. 中国机械工程, 2019, 30(14): 1696-1702,1712.