2A12铝合金圆波纹夹芯板抗平头弹冲击特性的试验研究

doi:10.3969/j.issn.1004-132X.2021.03.014

摘要/Abstract

摘要： 为研究铝合金圆波纹夹芯板对平头弹体的抗冲击性能，通过一级气炮系统开展弹体冲击铝合金圆波纹夹芯板以及等面密度单层均质板的试验。基于冲击试验数据，分析圆波纹夹芯板对弹体冲击的防护性能、失效模式和能量吸收情况，并与单层板进行对比，以获得两种靶板抗冲击性能的差异及原因。研究结果表明：弹体冲击圆波纹夹芯板的弹道极限速度低于单层板的弹道极限速度；圆波纹夹芯板的冲击位置对其抗冲击性能存在影响，圆波纹夹芯板节点与基座冲击相比，弹道极限速度有所提高；圆波纹夹芯板的正面板主要发生剪切冲塞破坏，而芯体发生剪切与压溃破坏，背面板主要发生拉伸撕裂破坏；单层板主要发生局部化的剪切冲塞；此外，靶板失效模式与耗能均受弹体冲击速度的影响。

关键词: 波纹夹芯板, 弹道极限速度, 失效模式, 能量吸收, 冲击

Abstract: In order to study the impact resistance of aluminum alloy circular corrugated sandwich plates to blunt-nosed projectile, the impact tests of aluminum alloy circular corrugated sandwich plates and monolithic homogeneous plates with equal area density were carried out by the one stage gun system. Based on the test data, the protection performance, failure mode and energy absorption of the circular corrugated sandwich plates against the impacts of projectile were analyzed, and sandwich plates were compared with the monolithic plates to obtain the difference and reason of the impact resistance of the two kinds of plates. The results show that the ballistic limit velocity of the circular corrugated sandwich plates is lower than that of monolithic plates. The impact position of the circular corrugated sandwich plates has an effect on its impact resistance, the ballistic limit of the node of the circular corrugated sandwich plates is higher than that of pedestal. The front plate of circular corrugated sandwich plates is mainly damaged by shear punching, while the core is damaged by shear and crushing, and the back plate is mainly damaged by tensile tearing. For the monolithic plates, the shear plug is localized. In addition, the failure mode and energy consumption of the plates are affected by the impact velocity of projectile.

Key words: corrugated sandwich plate, ballistic limit velocity, failure mode, energy absorption, impact

中图分类号:

O385

邓云飞;贾惠茹;路明建;张银波. 2A12铝合金圆波纹夹芯板抗平头弹冲击特性的试验研究[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2021.03.014.

DENG Yunfei;JIA Huiru;LU Mingjian;ZHANG Yinbo. Experimental Study of Impact Resistance of 2A12 Aluminum Alloy Circular Corrugated Sandwich Plates to Blunt-nosed Projectile[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2021.03.014.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2021.03.014

https://www.cmemo.org.cn/CN/Y2021/V32/I03/357

参考文献

［1］郑宇宁, 邱志平, 苑凯华. 复合材料波纹板在剪切载荷下的屈曲特性分析与可靠性优化［J］. 振动与冲击, 2016, 35(19):7-14.
ZHENG Yuning, QIU Zhiping, WAN Kaihua. Buckling Performance Analysis and Reliability Optimization of Composite Corrugated Plates under Shear Loading［J］. Journal of Vibration and Shock, 2016, 35(19):7-14.
［2］DAHIWALE N B, PANIGRAHI S K, AKELLA K. Numerical Analyses of Sandwich Panels with Triangular Core Subjected to Impact Loading［J］. Journal of Sandwich Structures and Materials, 2015, 17(3):238-257.
［3］HOLMEN J K, BRVIK T, HOPPERSTAD O S. Experiments and Simulations of Empty and Sand-filled Aluminum Alloy Panels Subjected to Ballistic Impact［J］. Engineering Structures, 2017, 130:216-228.
［4］WADLEY H N G, DHARMASENA K P, OMASTA M R, et al. Impact Response of Aluminum Corrugated Core Sandwich Panels［J］. International Journal of Impact Engineering, 2013, 62:114-128.
［5］BRVIK T, CLAUSEN A H, ERIKSSON M, et al. Experimental and Numerical Study on the Perforation of AA6005-T6 Panels［J］. International Journal of Impact Engineering, 2005, 32:35-64.
［6］赵桂平, 卢天健. 多孔金属夹层板在冲击载荷作用下的动态响应［J］. 力学学报, 2008, 40(2):194-206.
ZHAO Guiping, LU Tianjian. Dynamic Response of Cellular Metallic Sandwich Plates under Impact Loading［J］. Chinese Journal of Theoretical and Applied Mechanics, 2008, 40(2):194-206.
［7］RUBINO V, DESHPANDE V S, FLECK N A. The Dynamic Response of Clamped Rectangular Y-frame and Corrugated Core Sandwich Plates［J］. European Journal of Mechanics A/Solids, 2009, 28:14-24.
［8］RUBINO V, DESHPANDE V S, FLECK N A. The Dynamic Response of End-clamped Sandwich Beams with a Y-frame or Corrugated Core［J］. International Journal of Impact Engineering, 2008, 35(8):829-844.
［9］RECHT R F, IPSON T W. Ballistic Perforation Dynamics ［J］. Journal of Applied Mechanics-transactions of ASME, 1963, 30:385-391.
［10］DEY S. High-strength Steel Plates Subjected to Projectile Impact:an Experimental and Numerical Study［D］. Torndheim:Norwegian University of Science and Technology, 2004.
［11］BRVIK T, DEY S, CLAUSEN A H. A Preliminary Study on the Perforation Resistance of High-strength Steel Plates［J］. J. Phys. Ⅳ France, 2006, 134:1053-1059.

[1]	洪睿, 胡建军, 肖洋, 金瑶兰, 姚静, 孔祥东. 壁面微缺陷影响下的介观尺度冲击射流流场特性[J]. 中国机械工程, 2025, 36(10): 2215-2223.
[2]	杨永辉, 祁奔, 王浩宇, 白振华. 连退机组直火加热工艺与控制技术的开发[J]. 中国机械工程, 2025, 36(10): 2397-2404.
[3]	谭靓1, 2, 樊怡3, 姚倡锋1, 2. 400 ℃高周疲劳下TC17超声冲击强化表面状态演化规律研究[J]. 中国机械工程, 2025, 36(04): 790-801.
[4]	夏亮亮1, 徐勇2, 李杰3, 解文龙2, 刘雪飞3, 张士宏2. 高应变速率下铝合金增塑降弹效应研究[J]. 中国机械工程, 2024, 35(12): 2177-2184.
[5]	柴蓉霞1, 姜潇远1, 王秦生2, 于正洋3, 龙雪1, 刘军1. 基于能量分配原理的煤矿机械冲击行为研究及装置设计[J]. 中国机械工程, 2024, 35(09): 1584-1596.
[6]	王尧1, 管恩广1, 张青雷1, 2. 弹塑性接触冲击永久变形与滑移长度的解析求解[J]. 中国机械工程, 2024, 35(08): 1381-1389，1396.
[7]	冯洪1, 齐金平2, 刘晓宇1, 李鸿伟1, 燕大强3, 付录生4. 考虑随机变失效阈值的多相关退化可靠性建模[J]. 中国机械工程, 2024, 35(05): 811-820.
[8]	陈炼, 魏小虎, 曹强, 周岩, 杨迎新, 胡川, 赵志杰, 伍彬. 凸棱非平面聚晶金刚石齿的破岩机理及在含砾地层中的应用[J]. 中国机械工程, 2024, 35(02): 371-379.
[9]	朱福先, 仇刚, 朱兴民, 徐先宜, 周金宇. 碳玻混杂复合材料单钉单剪螺栓连接结构失效模式及渐进损伤分析[J]. 中国机械工程, 2023, 34(23): 2781-2793.
[10]	陈清华, 吕可, 王德俊, 王建刚, 王建业, 冯鹏. 爆炸载荷下实验舱功能梯度防爆结构的性能[J]. 中国机械工程, 2023, 34(21): 2568-2576.
[11]	查旭明, 袁智, 秦浩, 袭琳清, 张涛, 姜峰. 钛合金超声冲击强化研究现状及发展趋势[J]. 中国机械工程, 2023, 34(19): 2269-2287.
[12]	周国强, 王慧, 宋宇宁, 赵国超, . 液压支架双级安全阀设计及其快速动载冲击试验研究[J]. 中国机械工程, 2023, 34(18): 2194-2203.
[13]	王良文, 孔阳光, 王若澜, 张志刚, 刘旭玲, 李林峰, . 薄壁易碎圆柱内壁工件的内撑式机械手抓取接触-碰撞仿真与实验研究[J]. 中国机械工程, 2023, 34(17): 2026-2036.
[14]	徐龙, 胡志强, 杨翊, 王超, . 水空两用推进器齿式超越离合器接合特性研究[J]. 中国机械工程, 2023, 34(09): 1126-1133.
[15]	沈民民, 孙船斌, 童宝宏, 侯童珅. 多孔挡板影响液体晃荡冲击压力特征的研究[J]. 中国机械工程, 2022, 33(24): 2953-2960.