仿生高强韧轻质管结构的抗弯性能研究

doi:10.3969/j.issn.1004-132X.2025.02.016

中国机械工程 ›› 2025, Vol. 36 ›› Issue (02): 333-341.DOI: 10.3969/j.issn.1004-132X.2025.02.016

仿生高强韧轻质管结构的抗弯性能研究

辛嘉铭¹;纪小刚^1,2*;孙榕¹;苏义麟¹

1.江南大学机械工程学院，无锡，214122
2.江苏省食品先进制造装备技术重点实验室，无锡，214122

出版日期:2025-02-25 发布日期:2025-04-02
作者简介:辛嘉铭，男，1999年生，硕士研究生。研究方向为CAD/CAM、轻质管结构等。发表论文1篇。
基金资助:
国家自然科学基金(52175234,51105175);江苏省“六大人才高峰”项目(JXQC-006)

Study on Bending Performance of Bionic High-strength and Lightweight Pipe Structures

XIN Jiaming¹;JI Xiaogang^1,2*;SUN Rong¹;SU Yilin¹

1.School of Mechanical Engineering,Jiangnan University,Wuxi,Jiangsu,214122
2.Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment Technology,Wuxi,
Jiangsu,214122

Online:2025-02-25 Published:2025-04-02

摘要/Abstract

摘要： 基于玻璃海绵中八角形结构和竹节中维管束特征，利用数字光处理技术(digital light processing,DLP)工艺设计并制备了两类仿生轻质高强韧平面结构及对应的管状支架结构；采用仿真与实验相结合的方法，聚焦分析仿生平面结构在受压过程中的极限载荷、破坏模式和吸能情况；基于三点弯曲力学性能试验结果并结合数值模拟选取抗弯性能最优的仿生平面结构，并对各平面结构对应的仿生轻质管进行抗弯性能研究。结果表明，与传统蜂窝管相比，所设计的仿玻璃海绵轻质管抗弯性能更强，验证了平面结构对比结果的可靠性。研究结果可为新型轻质高强韧支架的设计和制备提供指导与参考。

关键词: 玻璃海绵, 仿生轻质结构, 三点弯曲, 轻量系数, 数字光处理工艺

Abstract: Based on the characteristics of octagonal structure in glass sponge and vascular bundle in bamboo segment, two kinds of bionic lightweight, high-strength and tough planar structures and corresponding tubular scaffolds were designed and prepared by DLP process. By combining simulation and experiments, the ultimate load, failure mode and energy absorption of bionic plane structures during compression were analyzed. Based on the experimental results of three-point bending mechanics properties and numerical simulation, the bionic plane structures with the best bending performance were selected, and the bionic light pipes corresponding to each plane structures were tested for bending performance. The results show that compared with the traditional honeycomb tube, the designed glass sponge light tube has stronger bending resistance, which verifies the reliability of the plane structure comparison results. The resylts may provide guidance and reference for the design and preparation of new lightweight high strength and toughness scaffolds.

Key words: , glass sponge, bionic lightweight structure, three-point bending, light weight coefficient, digital light processing(DLP)

中图分类号:

辛嘉铭1, 纪小刚1, 2, 孙榕1, 苏义麟1. 仿生高强韧轻质管结构的抗弯性能研究[J]. 中国机械工程, 2025, 36(02): 333-341.

XIN Jiaming1, JI Xiaogang1, 2, SUN Rong1, SU Yilin1. Study on Bending Performance of Bionic High-strength and Lightweight Pipe Structures[J]. China Mechanical Engineering, 2025, 36(02): 333-341.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2025.02.016

https://www.cmemo.org.cn/CN/Y2025/V36/I02/333

参考文献

［1］HE Meng, LI Yan, YIN Jie, et al. Compressive Performance and Fracture Mechanism of Bio-inspired Heterogeneous Glass Sponge Lattice Structures Manufactured by Selective Laser Melting［J］. Materials & Design, 2022, 214:110396.
［2］DROZDOV A L, ANDREYKIN N A, DOROFEEV A G. Structure and Physico-chemical Properties of Organosilicon Crystal-like Composite Spicules of the Glass Sponge Hyalonema Sieboldi［J］. Materials Research Bulletin, 2018, 105:372-376.
［3］BIRKBAK M E, GUIZAR-SICAIROS M, HOLLER M, et al. Internal Structure of Sponge Glass Fiber Revealed by Ptychographic Nanotomography［J］. Journal of Structural Biology, 2016, 194(1):124-128.
［4］LUO Rong, LI Zhangpeng, WU Xianzhang, et al. Super Durable Graphene Aerogel Inspired by Deep-sea Glass Sponge Skeleton［J］. Carbon, 2022, 191:153-163.
［5］WEAVER J C, MILLIRON G W, ALLEN P, et al. Unifying Design Strategies in Demosponge and Hexactinellid Skeletal Systems［J］. The Journal of Adhesion, 2010, 86(1):72-95.
［6］AIZENBERG J, WEAVER J C, THANAWALA M S, et al. Skeleton of Euplectella SP. Structural Hierarchy from the Nanoscale to the Macroscale［J］. Science, 2005, 309(5732):275-278.
［7］WEAVER J C, AIZENBERG J, FANTNER G E, et al. Hierarchical Assembly of the Siliceous Skeletal Lattice of the Hexactinellid Sponge Euplectella Aspergillum［J］. Journal of Structural Biology, 2007, 158(1):93-106.
［8］LI Quanwei, SUN Bohua. Optimization of a Lattice Structure Inspired by Glass Sponge［J］. Bioinspiration & Biomimetics, 2023, 18(1):016005.
［9］CHEN Poyu, McKITTRICK J, MEYERS M A. Biological Materials:Functional Adaptations and Bioinspired Designs［J］. Progress in Materials Science, 2012, 57(8):1492-1704.
［10］SVEN B, FARID D, LIAN Ding, et al. Bio-inspired Design to Support Reduced Energy Consumption via the ‘Light Weighting’ of Machine System Elements［J］. International Journal of Modeling and Optimization, 2015, 5(1):82-89.
［11］CROCE G, FRACHE A, MILANESIO M, et al. Structural Characterization of Siliceous Spicules from Marine Sponges［J］. Biophysical Journal, 2004, 86(1):526-534.
［12］乔莉, 冯庆玲, 王晓红, 等. 硅质海绵骨针的结构及力学性能［J］. 无机材料学报, 2008, 23(2):337-340.
QIAO Li, FENG Qingling, WANG Xiaohong, et al. Structure and Mechanical Properties of Silica Sponge Spicule［J］. Journal of Inorganic Materials, 2008, 23(2):337-340.
［13］LI Longhai, GUO Ce, CHEN Yiting, et al. Optimization Design of Lightweight Structure Inspired by Glass Sponges (Porifera, Hexacinellida) and Its Mechanical Properties［J］. Bioinspiration & Biomimetics, 2020, 15(3):036006.
［14］ZHAO Wei, HUANG Zhipeng, LIU Liwu, et al. Bionic Design and Performance Research of Tracheal Stent Based on Shape Memory Polycaprolactone［J］. Composites Science and Technology, 2022, 229:109671.
［15］MORANKAR S, KUMAR A, LUKTUKE A, et al. Influence of Hydration on the Micromechanical Properties of Silica Spicules from the Venus Flower Basket (Euplectella Aspergillum)［J］. JOM, 2023, 75(9):3816-3826.
［16］陈冠军, 袁晶, 余雁, 等. 竹材顺纹抗压性能的种间差异及其影响因子研究［J］. 木材加工机械, 2018(6):23-27.
CHEN Guanjun, YUAN Jing, YU Yan, et al. Study on Interspecific Differences of the Compression Performance Parallel to the Grain of Bamboo and Its Influencing Factors［J］. Wood Processing Machinery, 2018(6):23-27.

仿生高强韧轻质管结构的抗弯性能研究

Study on Bending Performance of Bionic High-strength and Lightweight Pipe Structures

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics