Principle of Geometric Elements Constructed Tooth Pairs with Curve-surface Mesh

Abstract

Abstract: According to the contact characteristics of curve and surface, the principle of geometric elements constructed tooth pairs with curve-surface mesh for gear transmissions was put forward. The concepts of curve-surface contact and curve-surface mesh were provided and three key elements for curve-surface mesh were given. The fundamental principle of curve-surface mesh was presented. The corresponding conjugated curve was also deduced. By establishing a cross section profile on normal plane of every point of the curve, the tooth surface was constructed. Taking an internal helical gear of parallel-axis as an example, a new gear pair with curve-surface mesh was established by selecting a contact path on the internal helical gear and the general law for the mesh processes of the gear pair was analyzed. The results reveal that based on the principle of curve-surface mesh, a gear pair with point contact may be obtained by choosing appropriate design parameters. The principle of curve-surface mesh provides a method for the generation of tooth surfaces.

Key words: gear transmission with geometric elements constructed tooth pairs, curve-surface mesh, contact path, meshing equation, generation of tooth surface

摘要： 根据曲线和曲面两种几何元素的接触特点，提出了线面对构齿轮啮合原理。定义了线面接触与线面啮合的概念，给出了线面啮合运动三要素；建立了线面啮合基本理论,得到与已知曲面相啮合的共轭曲线方程的通用表达式；通过在曲线每一点处的法平面上建立截面齿廓，进而构建连续曲面。以平行轴内啮合渐开线齿轮为例，通过在渐开线内齿轮齿面上选取接触曲线，构建新的线面啮合齿轮副，分析了线面啮合齿轮啮合过程的一般规律。研究结果表明，根据线面啮合原理，通过选取合适的几何参数，可以构建出一对正确啮合的点接触齿轮。该原理为齿轮齿面构建提供了新方法。

关键词: 对构齿轮传动, 线面啮合, 接触曲线, 啮合方程, 齿面成形

CLC Number:

TH132.429

PENG Shuai1;CHEN Bingkui2. Principle of Geometric Elements Constructed Tooth Pairs with Curve-surface Mesh[J]. China Mechanical Engineering.

彭帅1;陈兵奎2. 线面对构齿轮啮合原理[J]. 中国机械工程.

References

[1]LUO Shanming, WU Yue, WANG Jian. The Generation Principle and Mathematical Models of a Novel Cosine Gear Drive[J]. Mechanism and Machine Theory, 2008, 43(12): 1543-1556.

[2]张展. 渐开线圆柱齿轮传动[M]. 北京:机械工业出版社, 2012:1-20.

ZHANG Zhan. Involute Cylindrical Gear Transmission[M]. Beijing: China Machine Press, 2012:1-20.

[3]LITVIN F L, FUENTES A, DEMENEGO A, et al. New Developments in the Design and Generation of Gear Drives[J]. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part C： Journal of Mechanical Engineering Science, 2001, 215(7):747-757.

[4]石照耀，康焱，林家春. 基于齿轮副整体误差的齿轮动力学模型及其动态特性[J]. 机械工程学报, 2010, 46(17):55-61.

SHI Zhaoyao, KANG Yan，LIN Jiachun. Comprehensive Dynamics Model and Dynamic Response Analysis of a Spur Gear Pair Based on Gear Pair Integrated Error[J]. Journal of Mechanical Engineering, 2010, 46(17):55-61.

[5]黄小平，黄爱苹，黄锡恺，等. 齿轮纯滚动啮合的原理与实现[J]. 机械传动，2001(3)：5-8.

HUANG Xiaoping, HUANG Aiping, HUANG Xikai, et al. Principle and Implementation of Pure Rolling Contact Gears[J]. Journal of Mechanical Transimission，2001(3)：5-8.

[6]黄小平，黄爱苹. 纯滚动接触齿轮的齿形研究[J]. 林业机械与木工设备，2004(12)：39-41.

HUANG Xiaoping, HUANG Aiping. The Research on Tooth Form of Pure Rolling Contact Gears[J]. Forestry Machinery & Wood Working Equipment，2004(12): 39-41.

[7]厉海祥. 点线啮合齿轮传动[M]. 北京：机械工业出版社，2010:3-5.

LI Haixiang. The Points-line Meshing Gear Transmission[M]. Beijing: China Machine Press, 2010:3-5.

[8]厉海祥，罗齐汉，黄海，等. 点线啮合圆柱齿轮传动[J]. 水利电力机械，2007(6)：40-43.

LI Haixiang, LUO Qihan, HUANG Hai, et al. Transmission of the Point & Line Meshing Cylindrical Gear[J]. Water Conservancy, 2007(6): 40-43.

[9]TSENG R T, TSAY C B. Mathematical Model and Undercutting of Cylindrical Gears with Curvilinear Shaped Teeth[J]. Mechanism and Machine Theory, 2001, 36(11/12): 1189-1202.

[10]苏进展，方宗德，蔡香伟. 三次样条齿线圆柱齿轮齿面接触分析[J]. 哈尔滨工业大学学报, 2011, 43(9): 112-116.

SU Jinzhan, FANG Zongde, CAI Xiangwei. Contact Characteristics of Cylindrical Gear with Cubic Spline Tooth Traces[J]. Journal of Harbin Institute of Technology, 2011, 43(9): 112-116.

[11]李宁，李威，韩建友，等. 非对称齿廓渐开线斜齿圆柱齿轮的齿形设计及啮合[J]. 北京科技大学学报, 2011, 33(7): 876-882.

LI Ning, LI Wei, HAN Jianyou, et al. Tooth Profile Design and Meshing Analysis on a Helical Gear with Asymmetric Involute Teeth[J]. Journal of University of Science and Technology Beijing, 2011, 33(7): 876-882.

[12]陈兵奎，梁栋，高艳娥. 齿轮传动共轭曲线原理[J]. 机械工程学报, 2014, 50(1):130-136.

CHEN Bingkui, LIANG Dong, GAO Yane. The Principle of Conjugate Curves for Gear Transmission[J]. Journal of Mechanical Engineering, 2014, 50(1):130-136.

[13]陈兵奎，梁栋，彭帅，等. 共轭曲线齿轮啮合管齿面的几何及接触特性分析[J]. 西安交通大学学报, 2015, 49(3):85-94.

CHEN Bingkui, LIANG Dong, PENG Shuai, et al. Analysis on Geometric and Contact Characteristics of Tubular Meshing Tooth Surfaces for Conjugate-curve Gears[J]. Journal of Xian Jiaotong University, 2015, 49(3):85-94.