[1]姚福生.先进制造技术[M].北京:清华大学出版社, 2011.
YAO Fusheng. Advanced Manufacturing Technology[M]. Beijing:Tsinghua University Press,2011.
[2]胡亚民, 华林. 锻造工艺过程及模具设计[M]. 北京:北京大学出版社,2006.
HU Yamin,HUA Lin. Forging Process and Mold Design[M]. Beijing:Peking University Press,2006.
[3]ZHANG Lijun,ZHANG Depei,WANG Hanxiang,et al. Research on Variable Frequency-loading Curve in Precision Cropping System with High Speed and Centrifugal Action[J]. International Journal of Advanced Manufacturing Technology,2018,97(5):2969-2978.
[4]ZHANG Lijun,CHEN Xianfeng,WANG Hanxiang,et al. Research on Critical Loading Force in Precision Cropping System Based on Hydraulic Compensation[J]. International Journal of Mechanical Sciences,2018,142/143:44-50.
[5]肖鹏,熊翔,任芸芸. 制动速度对C/C-SiC复合材料摩擦磨损性能的影响[J]. 摩擦学学报,2006,26(1):12-17.
XIAO Peng,XIONG Xiang,REN Yunyun. Effect of Braking Speed on Friction and Wear Properties of C/C-SiC Composites[J]. Journal of Tribology,2006,26(1):12-17.
[6]尹健,张红波,熊翔,等. 不同速度下C/C-Cu复合材料的摩擦磨损性能[J]. 华中科技大学学报(自然科学版),2009,37(12):112-115.
YIN Jian,ZHANG Hongbo,XIONG Xiang,et al. Friction and Wear Properties of C/C-Cu Composites at Different Speeds[J]. Journal of Huazhong University of Science and Technology(Natural Science Edition),2009,37(12):112-115.
[7]陈洁,熊翔,姚萍屏,等. 摩擦面温度对铁基摩擦材料摩擦磨损性能影响机理的研究[J]. 粉末冶金技术,2004, 22(4):223-227.
CHEN Jie,XIONG Xiang,YAO Pingping,et al. Study on Mechanism of Friction Surface Temperature on Friction and Wear Properties of Iron Based Friction Materials[J]. Powder Metallurgy Technology,2004,22(4):223-227.
[8]沃恒洲,胡坤宏,胡献国. 纳米二硫化钼作为机械油添加剂的摩擦学特性研究[J]. 摩擦学学报,2004,24(1):33-37.
WO Hengzhou,HU Kunhong,HU Xianguo. Study on Tribological Properties of Nano Molybdenum Disulfide as Mechanical Oil Additive[J]. Journal of Tribology,2004,24(1):33-37.
[9]沃恒洲. 纳米润滑级二硫化钼摩擦学特性研究[D]. 合肥:合肥工业大学,2003.
WO Hengzhou. Study on Tribological Properties of Nano-lubricated Molybdenum Disulfide[D]. Hefei: Hefei University of Technology,2003.
[10]张立军,赵升吨,雷净. 棒料几何参数对其预制表面V形槽槽底应力集中系数的影响规律[J]. 塑性工程学报,2007,14(1):66-71.
ZHANG Lijun,ZHAO Shengdun,LEI Jing. Effect of Bar Material Geometric Parameters on Stress Concentration Factor of V-groove Bottom of Prefabricated Surface[J]. Journal of Plasticity Engineering,2007,14(1):66-71.
[11]韩晓明,高飞,宋宝韫,等. 摩擦速度对铜基摩擦材料摩擦磨损性能影响[J]. 摩擦学学报,2009,29(1):89-96.
HAN Xiaoming,GAO Fei,SONG Baoyun,et al. Effect of Friction Speed on Friction and Wear Properties of Copper Based Friction Materials[J]. Journal of Tribology, 2009,29(1):89-96.
[12]王云鹏,孙琨,杨思泽,等. 18Ni(3 0 0)钢高速干滑动摩擦磨损特性研究[J]. 摩擦学学报,2017,37(2):218-224.
WANG Yunpeng,SUN Kun,YANG Size,et al. Study on High Speed Dry Sliding Friction and Wear Characteristics of 18Ni(3 0 0) Steel[J]. Journal of Tribology,2017,37(2):218-224.
[13]阮亭纲,周桂源,谢先东,等. 钛基纳米润滑添加剂的减摩抗磨及自修复特性对比[J]. 中国表面工程,2015, 28(4):47-53.
RUAN Tinggang,ZHOU Guiyuan,XIE Xiandong,et al. Comparison of Antifriction,Antiwear and Self-repair Properties of Titanium-based Nanolubricating Additives[J]. China Surface Engineering,2015,28(4):47-53.
[14]韩晓明,符蓉,高飞,等. SiO2含量对铜基摩擦材料摩擦行为的影响[J]. 中国有色金属学报,2009,19(10):1848-1853.
HAN Xiaoming,FU Rong,GAO Fei,et al. Effect of SiO2 Content on the Friction Behavior of Copper-based Friction Materials[J]. Chinese Journal of Nonferrous Metals,2009, 19(10):1848-1853.
[15]林福东,黄平,尹延国. 速度与载荷对无铅铜铋轴承材料摩擦学特性的影响[J]. 粉末冶金材料科学与工程, 2013(2):235-240.
LIN Fudong,HUANG Ping,YIN Yanguo. Effects of Velocity and Load on Tribological Properties of Lead-free Copper Pluton Bearing Materials[J]. Powder Metallurgy Materials Science and Engineering,2013(2):235-240.
[16]马红帅,梁国星,吕明,等. AISI 4340钢干滑动摩擦磨损特性研究[J]. 摩擦学学报,2018,38(1):59-66.
MA Hongshuai,LIANG Guoxing,LYU Ming,et al. Study on Dry Sliding Friction and Wear Characteristics of AISI 4340 Steel[J]. Journal of Tribology,2018,38(1):59-66.
[17]朱公志,高玉周,刘世永,等. 羟基硅酸镁复合粉体润滑油添加剂对钢-钢摩擦副的抗磨自修复机理[J]. 摩擦学学报,2012,32(2):183-188.
ZHU Gongzhi,GAO Yuzhou,LIU Shiyong,et al. Anti-wear Self-repairing Mechanism of Lubricating Oil Additive of Magnesium Hydroxysilicate Composite Powder on Steel-steel Friction Pair[J]. Tribology,2012,32(2):183-188.
[18]刘美华,李秀珍,王树人,等.传统抗磨添加剂与纳米粒子的抗磨减摩机理分析比较[J].合成润滑材料,2002,29(2):19-22.
LIU Meihua,LI Xiuzhen,WANG Shuren,et al. Comparison of Antiwear and Antifriction Mechanisms between Traditional Antiwear Additives and Nano-particles[J]. Journal of Synthetic Lubricants,2002,29(2):19-22.
[19]唐扬,刘利国,王泽宇,等. 45#钢在含有微米级二硫化钼的18#齿轮油中的摩擦磨损性能[J]. 江南大学学报(自然科学版),2014,13(1):76-79.
TANG Yang,LIU Liguo,WANG Zeyu,et al. Friction and Wear Properties of 45# Steel in 18# Gear Oil Containing Micronsized Molybdenum Disulfide[J]. Journal of Jiangnan University (Natural Science Edition),2014,13(1):76-79.
[20]袁晓东,倪丽,张建锋,等.材料的抗磨减摩机理探讨[J].润滑油,2011,26(2):5-10.
YUAN Xiaodong,NI Li,ZHANG Jianfeng,et al. Antiwear and Friction Reduction Mechanism of Materials[J]. Lubricant,2011,26(2):5-10.
[21]FAN Yibo,GU Fengshou,BALL A. Modelling Acoustic Emissions Generated by Sliding Friction[J].Wear,2010, 268(5):811-815. |