[1]FENG Q, TANG Q, LIU Y. Quasi-static Analysis of Mechanical Properties of Ti6Al4V Lattice Structures Manufactured Using Selective Laser Melting[J]. International Journal of Advanced Manufacturing Technology, 2017, 94(6):1-13.
[2]陈忠旭, 姚锡禹, 郭亮,等. 基于激光的金属增材制造技术评述与展望[J]. 机电工程技术, 2017, 46(1):7-13.
CHEN Zhongxu,YAO Xiyu,GUO Liang,et al. Review and Prospect of Metal Additive Manufacturing Based on Laser[J]. Mechanical & Electrical Engineering Technology, 2017, 46(1):7-13.
[3]LADEWIG A, SCHLICK G, FISSER M, et al. Influence of the Shielding Gas Flow on the Removal of Process By-products in the Selective Laser Melting Process[J]. Additive Manufacturing, 2016, 10:1-9.
[4]FERRAR B, MULLEN L, JONES E, et al. Gas Flow Effects on Selective Laser Melting (SLM) Manufacturing Performance[J]. Journal of Materials Processing Tech., 2011, 212(2):355-364.
[5]李金梁, 王洪波, 张凯. 金属选区烧结3D 打印气氛保护系统分析[J]. 现代制造技术与装备,2016(6):160-166.
LI Jinliang, WANG Hongbo, ZHANG Kai. Analysis of Metal Concentration Sintering 3D Printing Atmosphere Protection System[J]. Modern Manufacturing Technology and Equipment, 2016(6):160-166.
[6]ANWARA B, PHAM Q C. Selective Laser Melting of AlSi10Mg: Effects of Scan Direction, Part Placement and Inert Gas Flow Velocity on Tensile Strength[J]. Journal of Materials Processing Technology, 2017, 240:388-396.
[7]宋长辉, 杨永强, 王赟达,等. CoCrMo合金激光选区熔化成形工艺及其性能研究[J]. 中国激光, 2014,41(6):52-59.
SONG Changhui, YANG Yongqiang, WANG Yunda, et al. Research on Process and Property of CoCrMo Alloy Directly Manufactured by Selective Laser Melting[J]. Chinese Journal of Lasers, 2014,41(6):52-59.
[8]王福军. 计算流体动力学分析——CFD软件原理与应用[M]. 北京:清华大学出版社,2004.
WANG Fujun. Computational Fluid Dynamics Analysis: Principles and Applications of CFD Software[M]. Beijing:Tsinghua University Press,2004.
[9]翟建华. 计算流体力学(CFD)的通用软件[J]. 河北科技大学学报, 2005, 26(2):160-165.
ZHAI Jianhua. Review of Commercial CFD Software[J]. Journal of Hebei University of Science and Technology, 2005, 26(2):160-165. |