[1]PASTOR B A. Synchronization Processes and Synchronizer Mechanisms in Manual Transmissions [J]. International Journal of Advanced Research in Computer Engineering & Technology, 2013, 1(3):15-31.
[2]徐万里, 赵巍, 张学明,等. 变速箱同步器失效过程与失效机理分析[J]. 机械工程学报, 2014, 50(14):69-74.
XU Wanli, ZHAO Wei, ZHANG Xueming, et al. Analysis on Failure Process and Failure Mechanism of Transmissio Synchronizer [J]. Journal of Mechanical Engineering, 2014,50(14): 69-74.
[3]MINDIVAN H, CIMENO LU H, KAYALI E S. Microstructures and Wear Properties of Brass Synchroniser Rings[J]. Wear, 2003, 254(5):532-537.
[4]KINUGASA T, ISHII H, SHOZAKI H, et al. Thermal Analysis of the Synchronizer Friction Surface and Its Application to the Synchronizer Durability Improvement[J]. JSAE Review, 1999, 20(2):217-222.
[5]LI X, ZHANG W, LI J, et al. Analysis on Synchronizer of Manual Transmission using Finite Element Analysis[J]. SAE Technical Papers, 2015: 2015-01-1148.
[6]HGGSTRM D, NYMAN P, SELLGREN U, et al. Predicting Friction in Synchronizer Systems[J]. Tribology International, 2016, 97:89-96.
[7]李晓春, 褚超美, 缪国. 汽车同步器换挡二次冲击的动态仿真[J]. 汽车工程, 2014,36(12):1498-1502.
LI Xiaochun, CHU Chaomei, MIAO Guo. A Dynamic Simulation on the Secondary Impact of Synchronizer in Vehicle Shifting Process [J] . Automotive Engineering, 2014, 36(12): 1498-1502.
[8]陈震, 钟再敏, 章桐. 基于ADAMS的同步器同步过程仿真分析[J]. 汽车工程, 2011, 33(4):340-344.
CHEN Zhen, ZHONG Zimin, ZHANG Tong. Simulation Analysis on the Synchronizing Process of Synchronizer Based on ADAMS [J]. Automotive Engineering, 2011, 33(4): 340-344.
[9]魏宸官, 赵家象. 液体粘性传动技术[M]. 北京:国防工业出版社, 1996.
WEI Chenguan, ZHAO Jiaxiang. Fluid Viscous Transmission Technology [M]. Beijing: National Defence Industry Press, 1996.
[10]张志刚. 关于湿式离合器几个工作特性研究[D]. 杭州:浙江大学, 2010.
ZHANG Zhigang. Study on Several Working Characteristics of Wet Clutch [D]. Hangzhou: Zhejiang University, 2010.
[11]PATIR N, CHENG H S. An Average Flow Model for Determining Effects of Three-dimensional Roughness on Partial Hydrodynamic Lubrication[J]. Journal of Tribology, 1978, 100:12-17.
[12]GREENWOOD J A, TRIPP J H. The Contact of Two Nominally Flat Rough Surfaces[J]. Proceedings of the Institution of Mechanical Engineers, 1970, 185(48/71): 625-634. |