Evaluation Method of CNC Machine's Green Degree Based on Clustering and ANFIS

Abstract

Abstract: To realize the intelligent evaluation and improve the prediction accuracy of CNC machine's green degree, an evaluation method of CNC machine's green degree was proposed based on clustering and ANFIS. Clustering algorithm based on FCM and improved particle swarm optimization were used to accomplish adaptive classification of samples and generate a training sample set for ANFIS learning. The fuzzy rules were automatically generated based on training results in order to eliminate effects of the fuzziness and randomness of the indicators. After training, the model might make inference about evaluation samples. Finally, with the experiments of the CNC machine's green degree evaluation, the effectiveness of the proposed method was demonstrated.

Key words: CNC machine, green degree, particle swarm, fuzzy C-means（FCM）, adaptive neural-fuzzy inference system（ANFIS）

摘要： 为了实现对数控机床绿色度的智能评价，提高数控机床绿色度预测精度，提出了一种基于聚类和自适应神经模糊推理系统（ANFIS）的评价方法。采用改进的粒子群优化模糊C均值聚类算法实现样本的自适应分类，生成辅助ANFIS学习的训练样本集；建立基于ANFIS的评价模型，通过对训练样本集的学习自动生成模糊规则，消除评价指标的模糊性和随机性对评价结果的影响；训练后的评价模型可用于评价样本的自适应推理。最后利用提出的评价方法对数控机床绿色度进行实例分析，验证了该评价方法的有效性。

关键词: 数控机床, 绿色度, 粒子群, 模糊C均值, 自适应神经模糊推理系统

CLC Number:

TH162

WANG Yugang1;IU Shichao2. Evaluation Method of CNC Machine's Green Degree Based on Clustering and ANFIS[J]. China Mechanical Engineering.

王宇钢1;修世超2. 基于聚类和自适应神经模糊推理系统的数控机床绿色度评价方法[J]. 中国机械工程.

References

[1]LIU Pengxiang，LI Guolong，CAO Huajun. Mathematical Model of Multi-source Energy Flows for CNC Worm Wheel Grinding Machine Tools[C]// Sustainable Design and Manufacturing. Cham：Springer，2016，659-672.
[2]李涛，孔露露，张洪潮，等. 典型切削机床能耗模型的研究现状及发展趋势[J]. 机械工程学报，2014，50(7)：102-111.
LI Tao，KONG Lulu，ZHANG Hongchao，et al. Recent Research and Development of Typical Cutting Machine Tool's Energy Consumption Model[J]. Journal of Mechanical Engineering，2014，50(7)：102-111.
[3]陈薇薇，张华，向琴，等. 基于支持向量机数控机床切削能耗预测方法研究[J]. 机械设计与制造，2014(11)：54-56.
CHEN Weiwei，ZHANG Hua，XIANG Qin，et al. Research on CNC Machine Tool Cutting Energy Consumption Prediction Based on Support Vector Machine[J]. Machinery Design and Manufacture，2014(11)：54-56.
[4]王贤琳，邱爽，王飞，等. 基于能值分析与模糊评价的数控机床绿色度评价方法研究[J]. 机床与液压，2015，43(13)：31-35.
WANG Xianlin，QIU Shuang，WANG Fei，et al. Study on Green Degree Evaluation Method of CNC Machine Tool Based on Energy Analysis and Fuzzy Evaluation[J]. Machine Tool and Hydraulics，2015，43(13)：31-35.
[5]潘尚峰，卢超，彭一. 基于改进BP神经网络的机床基础部件可再制造性评价模型[J]. 中国机械工程，2016，27(20)：2743-2748.
PAN Shangfeng，LU Chao，PENG Yibo. Evaluation Model for Machine Tool Basic Parts Remanufacturability Based on Optimized BP Neural Network[J]. Chinese Mechanical Engineering，2016，27(20)：2743-2748.
[6]曹华军，李洪丞，宋胜利，等. 基于生命周期评价的机床生命周期碳排放评估方法及应用[J]. 计算机集成制造系统，2011，17(11)：2432-2437.
CAO Huajun，LI Hongcheng，SONG Shengli，et al. Evaluation Method and Application for Carbon Emissions of Machine Tool Based on Life Cycle Assessment[J]. Computer Integrated Manufacturing systems，2011，17(11)：2432-2437.
[7]ZAHID H E, RIZWANA K, SHARIQ B, et al. Artificial Intelligence Techniques for Driving Safety and Vehicle Crash Prediction[J]. Artificial Intelligence Review，2016, 46(3)：351-387.
[8]刘飞,曹华军，张华，等.绿色制造的理论与技术[M].北京：科学出版社，2005：187-194.
LIU Fei，CAO Huajun，ZHANG Hua，et al. Theory and Technology of Green Manufacturing [M]. Beijing：Science Press，2005：187-194.
[9]SANJAY K D, BHAT J. Reliability Assessment of Component Based Software Systems Using Fuzzy and ANFIS Techniques[J]. International Journal of System Assurance Engineering and Management，2017，8(2)：1319-1926.
[10]NGUYEN H B, XUE B, LIU I, et al. New Mechanism for Archive Maintenance in PSO-Based Multi-objective Feature Selection[J]. Soft Computing， 2016, 20(10)：3927-3946.
[11]CHEN S W, XU Z M, TANG Y. A Hybrid Clustering Algorithm Based on Fuzzy C-means and Improved Particle Swarm Optimization[J]. Arabian Journal for Science & Engineering， 2014, 39(12)：8875-8887.
[12]FARHAD S, AMIN A N, SHAHIN R N, et al. Evaluating the Potential of Particle Swarm Optimization in Clustering of Hyperspectral Imagery Using Fuzzy C-means[C]// International Conference on Asia Agriculture and Animal. Singapore: Springer，2011:201-207.
[13]朴尚哲, 超木日力格,于剑. 模糊C 均值算法的聚类有效性评价[J].模式识别与人工智能，2015, 28(5):452-461.
PIAO Shangzhe，Chaomurilige，YU Jian. Cluster Validity Indexes for FCM Clustering Algorithm[J]. Pattern Recognition and Artificial Intelligence，2015，28(5)：452-46.

[1]	ZHANG Xi-Ning, DIAO Meng, WEN An-Rui. A Multi-objective Optimization Method for Holo-balancing Weights of Rotor Set [J]. J4, 201016, 21(16): 1974-1977.
[2]	CHEN Zhuofan, ZHOU Kun, QIN Feifei, WANG Binrui. Inverse Kinematics Solution of Robots Based on IQPSO Algorithm [J]. China Mechanical Engineering, 2024, 35(02): 293-304.
[3]	RONG Yu, CHEN Gang, DOU Tianci, . A Multi Index Comprehensive Optimal Anti Impact Trajectory Planning Method [J]. China Mechanical Engineering, 2024, 35(02): 305-316.
[4]	SUN Yuxiang, CHEN Li, LONG Bo, WANG Yanping, LIU Shihua, JIA Kun. Intelligent Layout for Pipeline Supports of Nuclear Power Plant under Complex Load [J]. China Mechanical Engineering, 2024, 35(02): 317-323，336.
[5]	CHEN Junxiang, KONG Xiangdong, XU Kelong, AI Chao, . Comprehensive Performance Optimization of High Pressure Threaded Plug-in Relief Valves [J]. China Mechanical Engineering, 2023, 34(24): 2909-2919,2926.
[6]	LIU Xiaobao, YAN Qingxiu, YI Bin, YAO Tingqiang, GU Wenjuan. Optimization of Process Parameters in Process Manufacturing Based on Ensemble Learning and Improved Particle Swarm Optimization Algorithm [J]. China Mechanical Engineering, 2023, 34(23): 2842-2853.
[7]	LI Guangbao, GAO Dong, LU Yong, PING Hao, ZHOU Yuanyuan. Adaptive Kalman Filtering and PSO-GA-BP Algorithm for Robot Error Compensation [J]. China Mechanical Engineering, 2023, 34(20): 2456-2465.
[8]	PU Zhixin, GUO Jianwei, PAN Yuqi, BAI Yangxi. Performance Analysis and Optimization Design of 2PPaPaR Parallel Mechanism [J]. China Mechanical Engineering, 2023, 34(19): 2304-2312.
[9]	WANG Fulin, XIAO Qiang, LAI Shuning, TANG Nengyi. Reverse Identification of Constitutive Parameters of ZM5 Magnesium Alloy Based on Unequal Shear Model#br# #br# [J]. China Mechanical Engineering, 2023, 34(19): 2362-2369.
[10]	DUAN Linchao, ZHANG Xugang, ZHANG Hua, SONG Huawei, AO Xiuyi. SOC Estimation of Lithium-ion Batterys Based on Second-order Approximation Extended Kalman Filter [J]. China Mechanical Engineering, 2023, 34(15): 1797-1804.
[11]	LI Jian, MU Zongyi, DU Yanbin, HUANG Guangquan, RAN Yan. Research on Availability Analysis Method of CNC Machine Tools Based on Meta-action [J]. China Mechanical Engineering, 2023, 34(15): 1848-1855.
[12]	TIAN Zongrui, ZHI Pengpeng, YUN Guoli, GUO Xinkai, GUAN Yi. Multi-objective Robust Optimization Design Method Based on Adaptive Incremental Kriging Model [J]. China Mechanical Engineering, 2023, 34(08): 931-940.
[13]	LI Zhenjun, ZHAO Chunyu. Thermal Mechanics Coupling Analysis of Angular Contact Ball Bearings Installed in Pairs in Feed System [J]. China Mechanical Engineering, 2023, 34(07): 821-829.
[14]	LI Dongyang, YUAN Dongfeng, ZHANG Haixia, ZHENG Anzhu, DI Zijun, LIANG Daojun, . Research on Intelligent Tool Fault Diagnosis System of Machine Tools with Cloud-Edge-Device Collaboration [J]. China Mechanical Engineering, 2023, 34(05): 584-594.
[15]	LIU Jun, RUAN Xiaodong, YANG Pengliang, WU Di, ZHENG Minyi. Control of Foot Landing Flexibility in Metamorphic Robot Reconstruction and Steering [J]. China Mechanical Engineering, 2022, 33(24): 2917-2926.