[1]朱茂桃, 钱洋, 顾娅欣, 等. 基于Kriging模型的车门刚度和模态优化[J]. 汽车工程, 2013,35(11):1047-1050.
ZHU Maotao, QIAN Yang, GU Yaxin, et al. Stiffness and Modal Optimization of Car Door Based on Kriging Model[J]. Automotive Engineering, 2013, 35(11): 1047-1050.
[2]胡朝辉, 成艾国, 王国春, 等. 多学科优化设计在拼焊板车门轻量化中的应用[J]. 中国机械工程, 2010, 20(4):495-499.
HU Zhaohui, CHENG Aiguo, WANG Guochun, et al. Application of Multidisciplinary Optimization Design in Lightweight of Tailor Welded Blanks[J]. China Mechanical Engineering, 2010, 20(4):495-499.
[3]曹文钢, 曲令晋, 白迎春. 基于灵敏度分析的客车车身质量优化研究[J]. 汽车工程, 2009,31(3):278-281.
CAO Wengang, QU Lingjin, BAI Yingchun. Bus Body Quality Optimization Based on Sensitivity Analysis[J]. Automotive Engineering, 2009,31(3):278-281.
[4]叶盛, 辛勇. 基于灵敏度及尺寸优化的汽车车门轻量化[J]. 机械设计与研究, 2013,29(6):112-115.
YE Sheng, XIN Yong. Lightweight Design of Car Door Based on Sensitivity and Dimension Optimization[J]. Mechanical Design and Research, 2013,29(6):112-115.
[5]杨搏, 朱平, 余海东, 等. 基于模态分析法的车身NVH结构灵敏度分析[J]. 中国机械工程, 2008,19(3):361-364.
YANG Bo, ZHU Ping, YU Haidong, et al. Sensitivity Analysis of NVH of Body Structure Based on Modal Analysis[J]. China Mechanical Engineering, 2008,19 (3): 361-364.
[6]易辉成, 杨旭静, 王一骏. 基于多工况的车门结构多目标优化设计方法研究[J]. 微计算机信息, 2012(4):87-89.
YI Huicheng, YANG Xujing, WANG Yijun. Study on Multi-objective Optimization Design of Door Structure Based on Multi Conditions[J]. Microcomputer Information, 2012(4):87-89.
[7]方柘林, 王丽娟, 陈宗渝, 等. 基于车门结构的多目标优化设计方法研究[J]. 机械设计, 2014(8):60-64.
FANG Zhelin, WANG Lijuan, CHEN Zongyu, et al. Research on Multi-objective Optimization Design Based on Car Door Structure[J]. Mechanical Design, 2014(8):60-64.
[8]PARK G J. Echnical Overview of the Equivalent Static Loads Method for Non-linear Static Response Structural Optimization[J]. Structural and Multidisciplinary Optimization, 2011, 43(3):319-337.
[9]WANG Y, QIN X, LU L, et al. The Noise Control of Minicar Body in White Based on Acoustic Panel Participation Method[J]. Journal of Vibroengineering, 2016, 18(2):1332-1345.
[10]邬广铭, 史文库, 刘伟, 等. 基于模态灵敏度分析的客车车身优化[J]. 振动与冲击, 2013, 32(3):41-45.
WU Guangming, SHI Wenku, LIU Wei, et al. Optimization of Bus Body Based on Modal Sensitivity Analysis[J]. Vibration and Shock, 2013, 32(3): 41-45.
[11]QIN X, WANG Y, LU C, et al. Structural Acoustics Analysis and Optimization of an Enclosed Box-damped Structure Based on Response Surface Methodology[J]. Materials & Design, 2016,103:236-243.
[12]ZHU P, SHI Y, ZHANG K, et al. Optimum Design of an Automotive Inner Door Panel with a Tailor Welded Blank Structure[J]. Automobile Engineering, 2008, 222(8):1337-1348.
[13]吕辉, 于德介, 陈宁, 等. 基于可靠性的混合不确定参数汽车盘式制动器振动稳定性分析[J]. 机械工程学报, 2014,50(6):112-119.
LYU Hui, YU Dejie, CHEN Ning, et al. Reliability Analysis for Vibration Stability of Automotive Disc Brake System with Hybrid Uncertian Parameters[J]. Journal of Mechanical Engineering, 2014, 50(6): 112-119. |