Pulse Electromagnetic Field-assisted Chemical Mechanical Polishing Utilizing Magnetic Composite Abrasives Slurry and Its Polishing Performance

Abstract

Abstract:

A polishing method assisted by an auxiliary pulse electromagnetic field was proposed, where the magnetic polymer microspheres/SiO2 composite abrasives were anchored on a smooth glass tool plate by the magnetic force, and the dependence between diameter of composite abrasives and morphology of tool plate was reduced. In polishing processes, the abrasives entered into the polishing area easily by mean of pulse electromagnetic force, and a high material removal rate was obtained. An electromagnet with contrapuntal structure was designed, and simulation calculations show that uniform distributions of magnetic flux density and electromagnetic force are achieved. Force analyses indicate that the electromagnetic force can help the magnetic polymer microspheres enter the polishing area from near-polishing area, and material is polished by magnetic composite abrasives in two-body abrasion wear mechanism. Owing to the pulse electromagnetic force, magnetic composite abrasives is deposited and entered into polishing area easily without the occurrence of magnetic abrasives aggregation. Experiments of polishing silica wafer, using a glass tool plate of Ra 1.1μm surface roughness and pulse electromagnetic field with a certain frequency and duty cycle, have shown the superior characteristics. The material removal rate is increased from 137nm/min to 288nm/min with the assistance of the electromagnetic field of 5Hz frequency and 50% duty cycle, and the surface roughness of wafer is decreased from Ra 405nm to Ra 0.641nm.

Key words: chemical mechanical polishing, pulse magnetic field, magnetic composite abrasives, material removal rate, silicon wafer

摘要：

提出一种脉冲磁场辅助新型磁性复合磨粒化学机械抛光技术。该技术利用磁性聚合物微球与SiO2磨粒组成的复合磨粒抛光液,在脉冲磁场辅助作用下,实现磨粒尺寸对硬质抛光盘微观形貌依赖性小、磨粒易进入抛光区域、材料去除率较高的抛光。设计了“之”字形的对位式结构电磁铁,模拟计算表明其磁感应强度沿抛光平面分布均匀,磁性微球受到的磁力一致性好。磁性微球在抛光系统中的受力分析表明：磁性微球受磁力作用时有利于复合磨粒从近抛光区进入抛光区,以二体磨损的方式去除加工表面;磁性微球不受磁力作用时,复合磨粒随抛光液的流动而移动,避免大量聚集形成磁链。以表面粗糙度Ra=1.1μm的硬质抛光盘进行硅片抛光试验,施加不同频率和占空比的脉冲磁场前后,硅片的去除率从137nm/min提高到288nm/min,频率5Hz、占空比50%时获得最大值,硅片表面粗糙度由抛光前Ra=405nm减小到Ra=0.641nm。

关键词: 化学机械抛光, 脉冲磁场, 磁性复合磨粒, 材料去除率, 硅片

CLC Number:

Huang Yishen, Zhao Bingshan, Huang Shuiquan, You Hongwu, Xu Xuefeng. Pulse Electromagnetic Field-assisted Chemical Mechanical Polishing Utilizing Magnetic Composite Abrasives Slurry and Its Polishing Performance[J]. China Mechanical Engineering, 2014, 25(9): 1175-1179,1238.

黄亦申, 赵彬善, 黄水泉, 游红武, 许雪峰. 脉冲磁场辅助磁性复合磨粒化学机械抛光技术及其加工试验研究[J]. 中国机械工程, 2014, 25(9): 1175-1179,1238.

References

[1]Lei Hong，Luo Jianbin，Lu Xinchun. Two Steps Chemical-mechanical Polishing of Rigid Disk Substrate to Get Atom-scale Planarization Surface[J]. Chinese Journal of Mechanical Engineering,2006，19(4)：496-499.
[2]郭东明，康仁科，苏建修，等. 超大规模集成电路制造中硅片平坦化技术的未来发展[J]. 机械工程学报，2003，39(10): 100-105.
Guo Dongming，Kang Renke，Su Jianxiu，et al. Future Development on Wafer Planarization Technology in ULSI Fabrication[J]. Chinese Journal of Mechanical Engineering，2003，39(10)：100-105.
[3]Zantye P B，Kumar A，Sikder A K. Chemical Mechanical Planarization for Microelectronics Applications[J]. Materials Science and Engineering，2004，R45：89-220.
[4]Yano H，Matsui Y，Minamihaba G，et al. High-performance CMP Slurry with Inorganic/Resin Abrasive for Al/low k Damascene[C]//Mat. Res. Soc. Symp. Proc. 2001，San Francisco，California，2001,671：M2.4.1-M2.4.6.
[5]Armini S，Whelan C M，Moinpour M，et al. Composite Polymer Core–silica Shell Abrasives Effect of Polishing Time and Slurry Solid Content on Oxide CMP[J]. Electrochemical and Solid-State Letters，2007，10(9)： H243-H247.
[6]Lei Hong，Bu Naijing，Zhang Zefang，et al. Chemical Mechanical Polishing of Glass Substrate with α-alumina-g-polystyrene Sulfonic Acid Composite Abrasive[J]. Chinese Journal of Mechanical Engineering,2010，23(3)：496-499.
[7]Lu Y，Tani Y，Kawata K. Proposal of New Polishing Technology without Using a Polishing Pad[J]. CIRP Annals-Manufacturing Technology，2002，51(1)：255-258.
[8]许雪峰，马兵迅，彭伟，等. 无抛光垫化学机械抛光技术研究[J]. 中国机械工程，2008，19(20)：2407-2411.
Xu Xuefeng，Ma Bingxun，Peng Wei，et al. Study on Pad-free Chemical Mechanical Polishing Technology[J]. China Mechanical Engineering，2008，19(20)：2407-2411.
[9]许雪峰，郭权，彭伟，等. 磁性复合磨粒化学机械抛光技术及其加工试验研究[J]. 机械工程学报，2011，47(21)：186-192.
Xu Xuefeng，Guo Quan，Peng Wei，et al. Chemical Mechanical Polishing Using Magnetic Composite Abrasives Slurry and Experimental Study on Polishing Performance[J]. Journal of Mechanical Engineering，2011，47(21)：186-192.
[10]冯慈璋，马西奎. 工程电磁场导论[M]. 北京：高等教育出版社，2006.
[11]严密，彭晓领. 磁学基础与磁性材料[M]. 杭州：浙江大学出版社，2009.

[1]	ZHANG Qicong, JIANG Chen, YE Hui, SHEN Lingxin, JIAO Mengdie. Design and Processing Research of Dynamic Pressure Assisted Non-Newtonian Fluid Polishing Tools [J]. China Mechanical Engineering, 2023, 34(23): 2805-2811，2823.
[2]	JIA Zhixin, ZHANG Kaiyue, WANG Jin. Study on EDM of PCD by Mixing Iron Powders [J]. China Mechanical Engineering, 2023, 34(22): 2684-2692.
[3]	CHI Yulun, WU Zixuan. Correction Model and Experimental Study of Removal Rate in Tangential Cylindrical Grinding Based on Grinding Thermal Deformation Analysis [J]. China Mechanical Engineering, 2023, 34(15): 1778-1788.
[4]	LI Hongyu, HUANG Xiangming, MING Yang, LI Xiyang, ZENG Qing, ZHOU Dongdong. Simulation and Experimental Study of Magnetic Field-assisted Shear Thickening Fluid Polishing for Cemented Carbide Blades [J]. China Mechanical Engineering, 2023, 34(06): 650-659.
[5]	YANG Heran, HE Yuan, SUN Xingwei, DONG Zhixu, QIAO Heting. Development of Belt Grinding Devices for Screw Rotor and Prediction of Material Removal Rates [J]. China Mechanical Engineering, 2021, 32(17): 2055-2062.
[6]	MAO Meijiao, XU Qing, LIU Jingli, YUAN Julong, LI Min, HU Zihua. Contact States of Workpiece-Abrasive Particles-Polishing Pad in Cemented Carbide CMP Processes [J]. China Mechanical Engineering, 2021, 32(17): 2074-2081.
[7]	WU Ke, LU Xinming, MEHMOOD Awais, ZHOU Libo, YUAN Julong. Fixed Abrasive Based Self-rotation Grinding for Single Crystal Sapphire [J]. China Mechanical Engineering, 2021, 32(16): 2002-2007，2015.
[8]	LI Junliang;WANG Shilong;WANG Sibao;XIA Changjiu. Energy Consumption Model of Hobbing Machine Tools Based on Workpiece Material Removal Rate [J]. China Mechanical Engineering, 2020, 31(21): 2626-2631.
[9]	XI Fengfei;ZENG Xi;JI Shiming;CHEN Guoda. Cobalt-based Alloy Material Removing Method under Photocatalytic Conditions [J]. China Mechanical Engineering, 2020, 31(06): 662-669.
[10]	LI Qingzhong;SUN Sulei;LI Qiangqiang. Experimental Study on Homogeneity Mutual Polishing of Monocrystalline Silicon [J]. China Mechanical Engineering, 2019, 30(23): 2773-2777.
[11]	YUAN Julong1，3，4;MAO Meijiao1，2;LI Min1，3，4;LIU Shun2;WU Feng2;HU Zihua2;QIN Changjiang2. Optimization of CMP Processing Parameters for YG8 Cemented Carbide Inserts Based on RSM [J]. China Mechanical Engineering, 2018, 29(19): 2290-2297.
[12]	XU Zhiqiang1，2;YIN Shaohui3;JIANG Shengqiang1，2;ZHU Kejun1，2. ELID Grinding and CMP Compound Processing Technology for Sapphire Substrates [J]. China Mechanical Engineering, 2018, 29(11): 1310-1315.
[13]	Luo Cheng, Li Zhenglong, Cao Hongzhi, Zhang Xianglin. Influence Mechanism of Residual Tensile Stress in SKD11 Steel Caused by Pulse Magnetic Field Treatment [J]. China Mechanical Engineering, 2016, 27(11): 1535-1540.
[14]	Xue Rongyuan, Liu Zhidong, Wang Xiangzhi, Qiu Mingbo, Tian Zongjun. Research on Titanium Alloy TC4 Electrical-discharge Machining Characteristics Using Oil-in-water Emulsion [J]. China Mechanical Engineering, 2014, 25(9): 1164-1168.
[15]	Zhang Zhenyu, Song Yaxing, Xu, Chaoge. Chemical Mechanical Polishing of Soft-brittle CdZnTe Wafers Using a Developed Environment-friendly Solution [J]. China Mechanical Engineering, 2014, 25(22): 3008-3011.