[1]赵二飞.起重机臂架稳定性分析[D].吉林大学,2007:
[2]马青.履带起重机臂架有限元简化模型稳定性分析 [D].大连理工大学,2008:
[3]康国政,阚前华,张娟.大型有限元程序的原理结构与使用[M]. 2版.成都:西南交通大学出版社,2008.
[4]北京金土木软件技术有限公司,中国建筑标准设计研究院编著.SAP2000中文版使用指南[M],2006:714.
[5]潘钟林译.欧洲起重机械设计规范(F.E. M)(修订版)[S].上海:上海振华港口机械公司,1998.
[6]British Standards Institution. CEN/TS 13001-3.1-2004 Cranes General Design: Limit States andProof of Competence of Steel Structures[S]. London:BSI Publications, 2004.
[7]German Building and Civil Engineering Standards Committee. DIN18800 Part 2 : Structural Steelwork Analysis of Safety Against Buckling of Linear Members and Frames[S]. Berlin: Beuth Verlag GmbH,1990.
[8]Technical Committee on Logistics and Distributionof Goods. JIS B8821-2004 Japan Calculation Standards for Steel Structures of Cranes[S]. Tokyo: Japanese Industrial Standard,2004.
[9]American Institute of Steel Construction, Inc, AN-SI/ AISC360-2010 Specification for Structural SteelBuildings[S]. Chicago: American Institute of SteelConstruction, Inc. ,2010.
[10]中国机械工业联合会.GB3811-2008起重机设计规范[S].北京:中国标准出版社,2008.
[11]中华人民共和国建设部.GB50017-2003钢结构设计规范[S].北京:中国计划出版社,2003.
[12]张静. 履带起重机臂架稳定性研究 [D]. 大连: 大连理工大学,2009:
[13]王佳.具有主副臂结构的起重机格构式臂架整体稳定性研究[D].哈尔滨: 哈尔滨工业大学,2006:
[14]卜筠燕.基于有限元的臂架系统非线性分析方法研究及应用[D].大连: 大连理工大学,2008:
[15]李玉梅.履带起重机塔式臂架的整体稳定性分析方法研究 [D].山东大学,2008:
[16]毕尔格麦斯特 G, 斯托依普 H. 稳定理论[M]. 戴天民等,译.北京:中国工业出版社,1964.
[17]陈骥.钢结构稳定理论与设计[M].5版.北京:科学出版社,2011:17-248.
[18]郭仁俊.结构力学[M].北京:中国建筑工业出版社,2007.
[19]刘晓[1],罗永峰[1].复杂大跨空间钢结构非线性有限元稳定分析[J].计算机辅助工程,2007,16(3):25-29.
Liu Xiao, Luo Yongfeng. Non-linear Finite Element Analysis on Stability of Complicated Large Span Steel Structure[J]. Computer-aided Engineering, 2007, 16(3): 25-29.
[20]Li Wenjun, Xiong Xiaolei, Dai Xiwei, et al. Linear Stability Analysis of Space Compressive Structure of the Inverted — V Combinatorial Jib[J]. Advanced Materials Research, 2012, 510: 182-190.
[21]王金诺, 于兰峰, 编. 起重运输机金属结构[M]. 北京: 中国铁道出版社, 2002:423. |