CHEN Ye-Chao-1, SONG Shou-Hu-1, WANG Yu-Lin-1, DU Chang-Chun-2. Reliability of Welded Surfacing Layer for Remanufacture of Vehicle's Drive Axle Housing[J]. China Mechanical Engineering, 2013, 24(5): 676-680.
[1]刘毅. 东风EQ140汽车后桥壳的修复工艺[J]. 汽车技术,1993(1):43-47.
Liu Yi. The Repair Technology of Automobile Rear Axle Housing of Dongfeng EQ140[J]. Automobile Technology,1993(1):43-47.
[2]徐滨士,朱邵华. 表面工程的理论与技术[M]. 北京:国防工业出版社,2010.
[3]杨可,余圣甫,杨华. 氮合金化堆焊硬面合金组织与耐高温磨损性能[J]. 焊接学报,2011,32(1):5-8.
Yang Ke,Yu Shengfu,Yang Hua. Microstructure and High-temperature Wear-resistance of Nitrogen-alloying Hardfacing Alloy[J]. Transactions of the China Welding,2011,32(1):5-8.
[4]龚建勋,肖逸锋,马蓦. 过共晶高硼堆焊合金的显微组织及耐磨性[J]. 材料工程,2011(4):89-93.
Gong Jianxun,Xiao Yifeng,Ma Mo. Microstructure and Abrasion Resistance of Hypereutectic High-boron Hardfacing Alloys[J]. Journal of Materials Engineering,2011(4):89-93.
[5]刘政军,宋兴奎,唐兴涛. 异种材质堆焊层组织及耐磨性[J]. 焊接学报,2011,32(4):99-102.
Liu Zhengjun,Song Xingkui,Tang Xingtao. Microstructure and Wear Resistance of Dissimilar Metal Surfacing Layer[J]. Transactions of the China Welding Institution,2011,32(4):99-102.
[6]Padovani C,Davenport A J,Connolly B J,et al. Corrosion Protection of AA7449-T7951 Friction Stir Welds by Laser Surface Melting with an Excimer Laser[J]. Corrosion Science,2011,53(12):3956-3969.
[7]Santa J F,Blanco J A,Giraldo J E,et al. Cavitation Erosion of Martensitic and Austenitic Stainless Steel Welded Coatings[J]. Wear,2011,271(9/10):1445-1453.
[8]Mosallaee P M,Bodaqhi F,Moshrefifar M. Surface Modification of Low Carbon Steel Substrate by Al-rich Clad Layer Applied by GTAW[J]. Surface and Coatings Technology,2011,206(2/3):217-223.
[9]Sokolov M,Salminen A,Kuznetsov M,et al. Laser Welding and Weld Hardness Analysis of Thick Section S355 Structural Steel[J]. Materials and Design,2011,32(10):5127-5131.
[10]苏允海,唐兴涛,宋兴奎,等. 异种材质堆焊渗透裂纹和气孔形成机理[J]. 焊接学报,2011,32(6):97-100.
Su Yunhai,Tang Xingtao,Song Xingkui,et al. Mechanism of Penetrating Crack and Gas Porosity on Dissimilar Metal Surfacing[J]. Transactions of the China Welding Institution,2011,32(6):97-100.
[11]谢国乔. 16MnL汽车大梁板冷成型开裂的影响因素[J]. 湖南冶金,2006,34(2):11-16.
Xie Guoqiao.Effect Factors of Cracking During Cold Forming of 16MnL Automobile Frame Steel Plate[J]. Hunan Metallurgy,2006,34(2):11-16.
[12]章彬斌,梁斌. 基于金属磁记忆方法的压力容器对接焊缝应力检测[J]. 无损检测,2011,33(3):31-36.
Zhang Binbin,Liang Bin. Stress Inspection of Pressure Vessel Butt Weld Based on Metal Magnetic Memory Technique[J]. Nondestructive Testing,2011,33(3):31-36.