Model Establishment and Numerical Analysis of Welded Wheel Axle of Four-wheel-juxtaposed Landing Gear

China Mechanical Engineering ›› 2012, Vol. 23 ›› Issue (17): 2071-2074.

Previous Articles Next Articles

Model Establishment and Numerical Analysis of Welded Wheel Axle of Four-wheel-juxtaposed Landing Gear

Huang Mingmin1,2;Zuo Dunwen2;Li Xiangfeng2;Wang Hongfeng2;Wang Min2

1.Aerospace System Engineering Insitute of Shanghai, Shanghai, 201108
2.Nanjing University of Aeronautics & Astronautics,Nanjing, 210016

Online:2012-09-10 Published:2012-09-12
Supported by:

National Natural Science Foundation of China（No. 50675104）

四轮并列式起落架焊接主起轮轴受载模型及分析

黄铭敏1,2;左敦稳2;黎向锋2;汪洪峰2;王珉2

1.上海宇航系统工程研究所,上海,201108
2.南京航空航天大学,南京,210016

基金资助:
国家自然科学基金资助项目（50675104）；江苏省精密与微细制造技术重点实验室开放基金资助项目（JSPM200705）
National Natural Science Foundation of China（No. 50675104）

Abstract

Abstract:

Aiming to learn the loading formality of a four-wheel-juxtaposed landing gear of large airplane, loading model of its welded main wheel axle was established during the landing process. Finite element analysis was done about the force distribution on the welded main wheel axle by taking plane EL-76 as example. Results show that equivalent stress is greatest in two welding seams, where fracture may take place with highest ratio. The first landed wheel suffers cyclical loading, which may lead to fatigue fracture of the axle.

Key words: landing gear, wheel axle, welding, loading model, stress analysis

摘要：

针对大飞机上常用的四轮并列式起落架,给出了飞机在着陆准稳态阶段,其起落架焊接主起轮轴的受载数学模型。以伊尔-76飞机为研究对象,采用有限元分析软件ANSYS,模拟了其机轮着陆过程中焊接主起轮轴受力状况。结果表明,主起轮轴上两道焊缝处应力最大,断裂几率最高,最先着陆机轮的轴颈处由于受到循环载荷作用,易发生疲劳断裂。


关键词: 起落架, 主起轮轴, 焊接, 受载模型, 应力分析

CLC Number:

V215.5

HUANG Ming-Min-1, 2, ZUO Dui-Wen-2, LI Xiang-Feng-2, HONG Hong-Feng-2, WANG Min-2. Model Establishment and Numerical Analysis of Welded Wheel Axle of Four-wheel-juxtaposed Landing Gear[J]. China Mechanical Engineering, 2012, 23(17): 2071-2074.

黄铭敏1, 2, 左敦稳2, 黎向锋2, 汪洪峰2, 王珉2. 四轮并列式起落架焊接主起轮轴受载模型及分析[J]. 中国机械工程, 2012, 23(17): 2071-2074.

[1]	YUE Jianfeng, LONG Xinyu, HUANG Yunlong, GUO Jialong, LIU Wenji. On-line Identification of Narrow Gap P-GMAW Sidewall Fusion States Based on Arc Acoustic Signals [J]. China Mechanical Engineering, 2024, 35(02): 244-250，259.
[2]	LI Kunhang, ZHANG Siqi, WU Wei, HU Mingzhuo, SUN Yaling, XIONG Xin, HUANG Hong. Multi-field Coupling Simulation and Analysis for Resistance Spot Welding of Three-layer Dissimilar Unequal-thickness Steels [J]. China Mechanical Engineering, 2023, 34(24): 2996-3003.
[3]	LUO Wenze, CHENG Huimei, LIU Hongyan, WANG Yifeng, YE Yanhong, DENG Dean. Numerical Simulation of Residual Stress and Welding Deformation for High Strength Steel Q960E Butt-welded Joints [J]. China Mechanical Engineering, 2023, 34(17): 2095-2105,2141.
[4]	WU Chaoqun, ZHAO Song, LEI Ting. Robot Welding Trajectory Planning and High Frequency Control for Curved Seams [J]. China Mechanical Engineering, 2023, 34(14): 1723-1728.
[5]	GAO Kai, LI Kun, GU Hongli, . Effects of Amount of Galvanization on Microstructure and Mechanics Properties of Joints Made by Induction-pressure Welding of Low Alloy Steel/5052 Aluminum Alloy [J]. China Mechanical Engineering, 2023, 34(10): 1220-1229.
[6]	ZHOU Ruchuan, WU Wenmin, FENG Manman, GUO Hui, LIN Yanhu. Tooth Surface Generation and Meshing Characteristics Analysis of Low-angle Face Gear Drives [J]. China Mechanical Engineering, 2023, 34(06): 631-640.
[7]	LIU Haolin, LIU Xiaochuan, REN Jia, WANG Jizhen, DONG Jiuxiang, FANG Zheng. Design and Control Algorithm for Hexapod Landing Gear of Unmanned Helicopter [J]. China Mechanical Engineering, 2023, 34(04): 421-430，439.
[8]	GAO Jiapeng, HONG Bo, JIA Aiting, LI Xiangwen, QU Yuanyuan. Welding Seam Tracking System for Gas Metal Arc Welding of Container Girders [J]. China Mechanical Engineering, 2023, 34(02): 238-244,251.
[9]	ZHANG Jun, WANG Wen, WANG Jian, JIN Taotao, TIAN Zhipeng. Simulation Analysis of Temperature Fields and Parameter Optimization of Stationary Shoulder Friction Stir Welding [J]. China Mechanical Engineering, 2022, 33(17): 2115-2124.
[10]	LIU Liye, CHEN Yongliang, TANG Weili, WEI Yunpeng, SUO Shucan. Research on Open Control Systems and Tangent Tracking of Friction Stir Welding Machines [J]. China Mechanical Engineering, 2022, 33(16): 1948-1956.
[11]	ZHANG Wenjun, ZHANG Yandong, LIN Wei, ZHAI Qianjun, BAI Zhenhua, . Research on Influence Model and Influence Factors of Welding Quality of Continuous Annealing Units [J]. China Mechanical Engineering, 2022, 33(15): 1876-1881.
[12]	LI Huan, LYU Tianle, XIA Yujun, LI Yongbing. Adaptive Control Research and Quantitative Evaluation of Resistance Spot Welding Expulsion Based on Electrode Displacement [J]. China Mechanical Engineering, 2022, 33(09): 1025-1033.
[13]	LI Huan, HUANG Chaowang, ZHOU Kang, ZHANG Changxin, ZENG Caiyou. Numerical Simulation and Experimental Verification of High-power Ultrasonic Welding of Al/Steel Joints [J]. China Mechanical Engineering, 2022, 33(02): 226-233.
[14]	DONG Yude, WU Wenzhe, CHEN Jian, WU Haijiang, ZOU Wenjun. Automatic Inspection of Space Clearances between Welding Gun Head and Sheet Metal Parts [J]. China Mechanical Engineering, 2021, 32(21): 2598-2605.
[15]	ZHOU Hai, ZHANG Jiequn, XU Yameng, SHEN Junzhou, HUANG Mengdie. Crack Nucleation Position and Propagation Direction of Single Abrasive Grain Scribing Gallium Oxide Crystal Surfaces [J]. China Mechanical Engineering, 2021, 32(16): 1945-1951.

Model Establishment and Numerical Analysis of Welded Wheel Axle of Four-wheel-juxtaposed Landing Gear

四轮并列式起落架焊接主起轮轴受载模型及分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics