1.China Helicopter Research and Development Institute,Jingdezhen,Jiangxi,333000
2.School of Mechanical Engineering,Northwestern Polytechnical University,Xian,710072
3.School of Aerospace Engineering,Taizhou University,Taizhou,Zhejiang,318000
[1]HEATH G F, SLAUGHTER S C, FISHER D J, et al. Helical Face Gear Development under the Enhanced Rotorcraft Drive System Program:NASA/TM 2011-217125[P]. 2011-12-01.
[2]VAUJANY J P, GUINGAND M, REMOND D, et al. Numerical and Experimental Study of the Loaded Transmission Error of a Spiral Bevel Gear[J]. Journal of Mechanical Design, 2007, 129:195-200.
[3]周尧, 宋朝省, 朱才朝, 等. 小角度相交轴渐开线圆柱与变齿厚齿轮传动修形与啮合特性分析[J]. 机械工程学报, 2019, 55(15):135-144.
ZHOU Yao, SONG Chaosheng, ZHU Caichao, et al. Effects of Tooth Modifications on Mesh Characteristics of Intersected Beveloid and Cylindrical Involute Gear Pair with Small Shaft Angle[J]. Journal of Mechanical Engineering, 2019, 55(15):135-144.
[4]MITOME K I. Conical Involute Gear(Part 1. Design and Production System[J]. Bulletin of the JSME, 1983, 26(212):299-305.
[5]MITOME K I. Conical Involute Gear(Part 3. Tooth Action of a Pair of Gears[J]. Bulletin of the JSME, 1985, 28(245):2757-2764.
[6]贺敬良, 吴序堂. 交错轴锥形齿轮副几何设计的研究[J]. 西安交通大学学报, 2003, 37(5):471-474.
HE Jingliang, WU Xutang. Study on Geometrical Design of Conical Involute Gear Pair with Nonintersecting Nonparallel Axes[J]. Journal of Xian Jiaotong University, 2003, 37(5):471-474.
[7]贺敬良, 吴序堂. 交错轴渐开线锥形齿轮副啮合原理研究[J]. 机械工程学报, 2004, 40(4):81-84.
HE Jingliang, WU Xutang. Study on Gearing Principle of Crossed-axes Conical Involute Gears[J]. Journal of Mechanical Engineering, 2004, 40(4):81-84.
[8]LI Jiangang, WANG Shuyuan, HE Jingliang, et al. Contact Characteristics of Conical Involute Gears with Crossed Axes[J]. Journal of Shanghai University, 2005, 9(5):445-449.
[9]LIU Siyuan, SONG Chaosheng, ZHU Caichao, et al. Effects of Tooth Modifications on Mesh Characteristics of Crossed Beveloid Gear Pair with Small Shaft Angle[J]. Mechanism and Machine Theory, 2018, 119:142-160.
[10]LIU Siyuan, SONG Chaosheng, ZHU Caichao, et al. Concave Modifications of Tooth Surfaces of Beveloid Gears with Crossed Axex[J]. Journal of Mechanical Engineering Science, 2019, 233(4):1411-1425.
[11]NI Gaoxiang, ZHU Caichao, SONG Chaosheng, et al. Tooth Contact Analysis of Crossed Beveloid Gear Transmission with Parabolic Modification[J]. Mechanism and Machine Theory, 2017, 113:40-52.
[12]刘思远, 宋朝省, 朱才朝. 小交错角面铣准双曲面齿轮副的几何设计与啮合特性[J]. 中国机械工程, 2022, 33(13):1521-1536.
LIU Siyuan, SONG Chaosheng, ZHU Caichao. Design Methodology and Mesh Characteristics of Face-milled Hypoid Gears with Low Crossed Shaft Angle[J]. China Mechanical Engineering, 2022, 33(13):1521-1536.
[13]宋朝省, 樊荣, 刘立斌. 小角度交错轴变齿厚齿轮齿根应力及影响分析分析[J]. 重庆大学学报, 2014, 37(1):1-6.
SONG Chaosheng, FAN Rong, LIU Libin. Analysis on Tooth Root Stress and Influencing Factors of Crossed Beveloid Gears with Small Shaft Angle[J]. Journal of Chongqing University, 2014, 37(1):1-6.
[14]CAO Bing, ALESSANDRO F, LI Guolong, et al. A Computerized Method of Contact Pressure and Load Distribution for Crossed Beveloid Gears[J]. Mechanism and Machine Theory, 2022, 175:1-18.
[15]贺敬良, 吴序堂. 渐开线锥形齿轮滚削原理[J]. 机械科学与技术, 2003, 22(5):751-753.
HE Jingliang, WU Xutang. On the Hobbing Principle of Conical Involute Gears[J]. Mechanical Science and Technology, 2003, 22(5):751-753.
[16]CAO Bing, LI Guolong. Computerized Design of Plunge Shaving Tool for Beveloid Gears and Plunge Shaving Characteristic Analysis[J]. Mechanism and Machine Theory, 2021, 161:1-16.
[17]ZHU Feihong, SONG Chaosheng, ZHU Caichao, et al. Tooth Thickness Error Analysis of Straight Beveloid Gear by Inclined Gear Shaping[J]. International Journal of Precision Engineering and Manufacturing, 2022, 23:429-443.
[18]BAI Bo, KUANG Yuhua, GUO Wenchao, et al. Influence of Misalignment on Beveloid Gear Tooth Contact and Dynamic Characteristics in Transfer Case Transmission of AWD Vehicle[J]. Shock and Vibration, 2022, 7565845:1-14.
[19]宋朝省, 朱才朝, LIM T C, 等. 小角度空间交错轴变厚齿轮传动啮合动态特性研究[J]. 振动与冲击, 2012, 31(8):153-157.
SONG Chaosheng, ZHU Caichao, LIM T C, et al. Time-varying Meshing Characteristics of Beveloid Gears with Corssed Axes and Small Shaft Angle[J]. Journal of Vibration and Shock, 2012, 31(8):153-157.
[20]毛汉成, 傅琳, 于广滨, 等. 考虑轮齿修形的变厚齿轮啮合刚度数值计算[J]. 计算机集成制造系统, 2022, 28(2):526-535.
MAO Hancheng, FU Lin, YU Guangbin, et al. Numerical Calculation of Meshing Stiffness for Beveloid Gear with Profile Modification[J]. Computer Integrated Manufacturing Systems, 2022, 28(2):526-535.
[21]SUN Ruihua, SONG Chaosheng, ZHU Caichao, et al. Computational Study of Pitting Defect Influence on Mesh Stiffness for Straight Beveloid Gear[J]. Engineering Failure Anslysis, 2021, 119:1-15.
[22]HUANG Yucheng, DU Xuesong, ZHU Caichao, et al. Mesh Stiffness Analysis of Beveloid Gears for the Rotating Vector Transmission[J]. Journal of Mechanical Science and Technology, 2019, 33(8):3943-3953.
[23]LITVIN F L, GONZALEZ P I, FUENTES A, et al. Design, Generation and Stress Analysis of Face-gear Drive with Helical Pinion[J]. Computer Methods in Applied Mechanics & Engineering, 2005, 194:3870-3901.
[24]LITVIN F L, EGELJA A, TAN J. Handbook on Face Gear Drives with a Spur Involute Pinion:NASA/CR 2000-209909[P]. 2000-03-01.
[25]LITVIN F L, FUENTES A, PEREZ I G, et al. Modified Involute Helical Gears:Computerized Design, Simulation of Meshing and Stress Analysis[J]. Computer Methods in Applied Mechanics & Engineering, 2003, 192:3619-3655.
[26]LITVIN F L, FUENTES A. Gear Geometry and Applied Theory[M]. New York:Cambridge University Press, 2004.
[27]唐进元, 刘艳平. 直齿面齿轮加载啮合有限元仿真分析[J]. 机械工程学报, 2012, 48(5):124-131.
TANG Jinyuan, LIU Yanping. Loaded Meshing Simulation of Face-gear Drive with Spur Involute Pinion Based on Finite Element Analysis[J]. Journal of Mechanical Engineering, 2012, 48(5):124-131.