[1]张万平[1],杨志刚[1],肖国权[1].柴油机受热零部件-冷却系统的流/热耦合仿真分析[J].系统仿真学报,2011,23(1):203-206.
[2]Kleemann A,Menegazzi P, Henriot S,et al. Numerical Study on Knock for an SI Engine by Thermally Coupling Combustion Chamber and Cooling Circuit Simulation[C]//SAE 2003 World Congress and Exhibition. Detroit, MI, USA, 2003 : 2003-01-0563.
[3]宣益民,李强.纳米流体强化传热研究[J].工程热物理学报,2000,21(4):466-470.
[4]Li Qiang, Xuan Yimin. Experimental Investigation on Transport Properties of Nanofluids[M]//Heat Transfer Science Technology. Higher Education Press, Beijing, 2000: 757-762.
[5]刘演华[1],干富军[1],张凯[2].平面射流场中纳米颗粒的成核与凝并[J].物理学报,2010(6):4084-4092.
[6]于淼[1],王子远[1],李德睿[1],王文[1].射流冲击冷却系统实验性能研究[J].低温工程,2010(6):50-55.
[7]张巧慧[1],朱华[1].新型传热工质纳米流体的研究与应用[J].能源工程,2006(2):52-54.
[8]Vehkamaki H, Kulmala M, Lehtinen K E, et al. Modeling Binary Homogeneous Nucleation of Water -sulfuric Acid Vapors': Parameterizations for High Temperature Emissions [J]. Environmental Science and Technology,2003,37(15) : 3392-3398.
[9]骆清国[1],刘红彬[1],龚正波[1],桂勇[1].柴油机气缸盖流固耦合传热分析研究[J].兵工学报,2008,29(7):769-773.
[10]Yan Junjie, Wu Xinzhuang, Chong Daotong. Experimental Study on Pressure and Temperature Distributions for Low Mass Flux Steam Jet in Subcooled Water[J]. Science in China Series E: Technological Science, 2009,52 (6) : 1493-1501.
[11]白敏丽[1],徐哲[1],吕继组[1].纳米流体对内燃机冷却系统强化传热的数值模拟研究[J].内燃机学报,2008,26(2):183-187.
[12]李德睿.射流冷却装置的模拟与实验研究[D].上海交通大学,2010: |