Experimental Investigation on High Frequency Induction Brazing of Diamond with Ni-based Brazing Filler

China Mechanical Engineering ›› 2010, Vol. 21 ›› Issue (16): 1977-1981.

Previous Articles Next Articles

Experimental Investigation on High Frequency Induction Brazing of Diamond with Ni-based Brazing Filler

Xu Zhengya1;Xu Hongjun2;Fu Yucan2

1.Changshu Institute of Technology,Changshu,Jiangsu,215500 

2.Nanjing University of Aeronautics and Astronautics,Nanjing,210016

Online:2010-08-25 Published:2010-09-14
Supported by:
National Natural Science Foundation of China（No. 50475040）

镍基合金钎料高频感应钎焊金刚石试验研究

徐正亚1;徐鸿钧2;傅玉灿2

1.常熟理工学院,常熟,215500

2.南京航空航天大学,南京,210016

基金资助:
国家自然科学基金资助项目(50475040)
National Natural Science Foundation of China（No. 50475040）

Abstract

Key words:

induction brazing, diamond, Ni-base brazing filler, brazing process

摘要：

选用Ni-Cr合金钎料,采用高频感应加热的方法实现了金刚石与钎料间的连接。扫描电镜（SEM）、能谱仪（EDS）、X射线衍射仪（XRD）分析结果表明：钎焊过程中钎料中的活性元素Cr向金刚石表面扩散富集,生成了层片状碳化物

Cr₃C₂。研究了金刚石感应钎焊工艺参数对钎焊质量的影响,并通过石材磨削试验确定了优化的感应钎焊工艺。

CLC Number:

TG454

XU Zheng-E, XU Hong-Jun, FU Yu-Can.

Experimental Investigation on High Frequency Induction Brazing of Diamond with Ni-based Brazing Filler

[J]. China Mechanical Engineering, 2010, 21(16): 1977-1981.

徐正亚, 徐鸿钧, 傅玉灿.

镍基合金钎料高频感应钎焊金刚石试验研究

[J]. 中国机械工程, 2010, 21(16): 1977-1981.

[1]	XU Zheng-E, XU Hong-Jun, FU Yu-Can. Experimental Investigation on High Frequency Induction Brazing of Diamond with Ni-based Brazing Filler [J]. J4, 201016, 21(16): 1977-1981.
[2]	CHEN Lian, WEI Xiaohu, CAO Qiang, ZHOU Yan, YANG Yingxin, HU Chuan, ZHAO Zhijie, WU Bin. Mechanism of Rock Breaking by Convex Non-planar PDC Cutter and Its Applications in Gravel-bearing Formation [J]. China Mechanical Engineering, 2024, 35(02): 371-379.
[3]	JIA Zhixin, ZHANG Kaiyue, WANG Jin. Study on EDM of PCD by Mixing Iron Powders [J]. China Mechanical Engineering, 2023, 34(22): 2684-2692.
[4]	WANG Fei, FENG Yi, LI Xinchao, LIU Zhuhan. Research on Multiple Arc Erosion Properties of Cu-Diamond Composites [J]. China Mechanical Engineering, 2023, 34(13): 1599-1604.
[5]	YUAN Shangyong, CHEN Genyu, DAI Longzhou, LU Enhao. Experimental Research of Coarse-grained Forming Grinding Wheel Dressed by EDDG [J]. China Mechanical Engineering, 2023, 34(10): 1164-1171.
[6]	LU Yanjun, GUAN Weifeng, SUN Jiajing, MO Rui, WU Xiaoyu. Dry Mirror Grinding Technology of Coarse Diamond Grinding Wheel Based on Electrical Discharge Dressing [J]. China Mechanical Engineering, 2023, 34(09): 1052-1060.
[7]	LI Shichun, ZHOU Lei, ZHOU Feisi, SUN Zhuo, . Study on　Pulsed Laser Layer-by-layer Brazing Processes of Diamond with Nickel-Chromium Alloys [J]. China Mechanical Engineering, 2023, 34(05): 543-555，575.
[8]	WANG Ziguang, LIU Jinxin, YIN Jian, ZHOU Ping, SHA Zhihua, KANG Renke. Surface Quality of Ultra-precision Grinding of Silicon with Fine Diamond Grinding Wheels [J]. China Mechanical Engineering, 2023, 34(02): 245-251.
[9]	LIU Weiji, YANG Feilong, ZHU Xiaohua, LUO Yunxu, HELing. Research on Mechanism of Rock Breaking and Speed Increase in Cutting with Abnormal PDC Cutter [J]. China Mechanical Engineering, 2022, 33(17): 2133-2141.
[10]	CHEN Genyu, DAI Longzhou, LI Mingquan, YUAN Shangyong. Experimental Research of Coarse-grained Arc Diamond Grinding Wheel Dressed by Laser and Electrical Discharge Compound Dressing [J]. China Mechanical Engineering, 2022, 33(15): 1780-1786.
[11]	LIANG Xingxin, ZHANG Sen, QI Shihuang, JIN Shuanbao. Experimental Study of Load Carrying Performance of Water Lubricated PCD Thrust Bearings for Rim Driven Thrusters [J]. China Mechanical Engineering, 2022, 33(12): 1452-1458，1467.
[12]	CHI Jianying, YU Aibing, WU Maochao, YUAN Jiandong, CHEN Qiujie, SUN Lei. Design of Dimensional Parameters of Chip Breaker Groove for PCD Cutting Tools [J]. China Mechanical Engineering, 2022, 33(03): 299-309.
[13]	WU Ke, LU Xinming, MEHMOOD Awais, ZHOU Libo, YUAN Julong. Fixed Abrasive Based Self-rotation Grinding for Single Crystal Sapphire [J]. China Mechanical Engineering, 2021, 32(16): 2002-2007，2015.
[14]	LI Shichun, ZHOU Zhenhong, MO Bin, DENG Zhaohui. Study on Forming Processes for Laser Brazing of Multilayer Diamond Grains and Ni-Cr Alloy#br# [J]. China Mechanical Engineering, 2021, 32(08): 967-975.
[15]	JIANG Haitao1;CUI Jianlei2;YIN Dongping1;MEI Xuesong2. Femtosecond Laser Processing Technology of Diamond Micro-channel Heat Sink Based on Radar Power Module [J]. China Mechanical Engineering, 2021, 32(03): 261-268.

Experimental Investigation on High Frequency Induction Brazing of Diamond with Ni-based Brazing Filler

镍基合金钎料高频感应钎焊金刚石试验研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics