Experimental Investigation on High Frequency Induction Brazing of Diamond with Ni-based Brazing Filler

China Mechanical Engineering ›› 2010, Vol. 21 ›› Issue (16): 1977-1981.

Previous Articles Next Articles

Experimental Investigation on High Frequency Induction Brazing of Diamond with Ni-based Brazing Filler

Xu Zhengya1;Xu Hongjun2;Fu Yucan2

1.Changshu Institute of Technology,Changshu,Jiangsu,215500 

2.Nanjing University of Aeronautics and Astronautics,Nanjing,210016

Online:2010-08-25 Published:2010-09-14
Supported by:
National Natural Science Foundation of China（No. 50475040）

镍基合金钎料高频感应钎焊金刚石试验研究

徐正亚1;徐鸿钧2;傅玉灿2

1.常熟理工学院,常熟,215500

2.南京航空航天大学,南京,210016

基金资助:
国家自然科学基金资助项目(50475040)
National Natural Science Foundation of China（No. 50475040）

Abstract

Key words:

induction brazing, diamond, Ni-base brazing filler, brazing process

摘要：

选用Ni-Cr合金钎料,采用高频感应加热的方法实现了金刚石与钎料间的连接。扫描电镜（SEM）、能谱仪（EDS）、X射线衍射仪（XRD）分析结果表明：钎焊过程中钎料中的活性元素Cr向金刚石表面扩散富集,生成了层片状碳化物

Cr₃C₂。研究了金刚石感应钎焊工艺参数对钎焊质量的影响,并通过石材磨削试验确定了优化的感应钎焊工艺。

CLC Number:

TG454

XU Zheng-E, XU Hong-Jun, FU Yu-Can.

Experimental Investigation on High Frequency Induction Brazing of Diamond with Ni-based Brazing Filler

[J]. China Mechanical Engineering, 2010, 21(16): 1977-1981.

徐正亚, 徐鸿钧, 傅玉灿.

镍基合金钎料高频感应钎焊金刚石试验研究

[J]. 中国机械工程, 2010, 21(16): 1977-1981.

[1]	XU Zheng-E, XU Hong-Jun, FU Yu-Can. Experimental Investigation on High Frequency Induction Brazing of Diamond with Ni-based Brazing Filler [J]. J4, 201016, 21(16): 1977-1981.
[2]	LI Shichun, ZHOU Zhenhong, MO Bin, DENG Zhaohui. Study on Forming Processes for Laser Brazing of Multilayer Diamond Grains and Ni-Cr Alloy#br# [J]. China Mechanical Engineering, 2021, 32(08): 967-975.
[3]	JIANG Haitao1;CUI Jianlei2;YIN Dongping1;MEI Xuesong2. Femtosecond Laser Processing Technology of Diamond Micro-channel Heat Sink Based on Radar Power Module [J]. China Mechanical Engineering, 2021, 32(03): 261-268.
[4]	CUI Zhongming;WANG Xing;HE Qingshan;ZHOU Baocang. A Method for Extruding Grinding Dressing Super-abrasive Grinding Wheels Using Free Grains under Constraint of Diamond Abrasive Surface [J]. China Mechanical Engineering, 2020, 31(24): 2959-2965.
[5]	MA Yachao;ZHANG Peng;HUANG Zhiqiang;DENG Rong;YU Hongmei. Optimal Design for Cutter-layout of Global Force Balanced PDC Bits [J]. China Mechanical Engineering, 2020, 31(20): 2412-2419,2428.
[6]	ZHANG Yongbin, YAN Guanghe, LI Jianyuan, JIANG Chen. Milling Process Tests of Diamond Coated Micro-milling Cutters [J]. China Mechanical Engineering, 2020, 31(15): 1772-1777.
[7]	LV Junjie;NI Jing;MENG Zhen;REN Xu;FENG Kai;YU Hongfei;WANG Yimeng. Surface Microstructure and Load Reduction Mechanism of Broach Tip Prepared by SPDT [J]. China Mechanical Engineering, 2020, 31(04): 390-395,402.
[8]	GUO Feifei1;JIN Shoufeng1;QIN Liguo2;DONG Guangneng2. Tribological Behavior of DLC Films under Water Environment [J]. China Mechanical Engineering, 2019, 30(18): 2206-2210.
[9]	CUI Ｗei;HAO Xiuqing;CHEN Xinwen;XIAO Sinong;LI Liang. Study on Fabrication of Lyophobic PCD by Pulsed Fiber Laser [J]. China Mechanical Engineering, 2019, 30(01): 30-37.
[10]	YANG Jun;KANG Min. Tool Path Generation and Simulation for Diamond Turning of Toric Surfaces Using Three Bending Moment Method [J]. China Mechanical Engineering, 2018, 29(13): 1580-1587.
[11]	LU Jinbin1,2;LI Hua1,2;LIU Wei1,2;ZHONG Sujuan3;MA Jia3. Interfacial Microstructure of Diamond Vacuum Brazed with Cu-based Composite Filler Metals Adding Ni-Cr-B-Si Alloy [J]. China Mechanical Engineering, 2018, 29(03): 353-358,365.
[12]	GONG Lixiong1;CHENG Shuangsheng2;LIU Yong3. Research on MEMS Micro-motion Measurements Based on Diamond Search Block-matching Technology [J]. China Mechanical Engineering, 2017, 28(22): 2747-2752.
[13]	CHEN Bing1,2;WANG Ge3;LIU Jianming4;DENG Zhaohui1,2;ZHAO Qingliang5. Precision Truing of Arc-shaped Diamond Wheel and On-line Monitoring of Truing Processes by AE Signals [J]. China Mechanical Engineering, 2017, 28(18): 2242-2249.
[14]	. Fabrication of PCD Slotting Tools Applied to Machine Micro Slot Arrays of Multiple Materials [J]. China Mechanical Engineering, 2017, 28(11): 1265-1268.
[15]	MA Yachao, HUANG Zhiqiang, LI Qin, PENG Shijin, XIE Dou. Calculation of Cutting Parameters of Cutters of PDC Bit under Wear Conditions [J]. China Mechanical Engineering, 2017, 28(08): 973-978.

Experimental Investigation on High Frequency Induction Brazing of Diamond with Ni-based Brazing Filler

镍基合金钎料高频感应钎焊金刚石试验研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics