Mechanism of Shock and Load Fluctuation of Variable Nozzle Turbines with Split Sliding Guide Vanes

doi:10.3969/j.issn.1004-132X.2020.15.003

China Mechanical Engineering ›› 2020, Vol. 31 ›› Issue (15): 1778-1786.DOI: 10.3969/j.issn.1004-132X.2020.15.003

Previous Articles Next Articles

Mechanism of Shock and Load Fluctuation of Variable Nozzle Turbines with Split Sliding Guide Vanes

YANG Dengfeng¹, PAN Yuzhou¹, WANG Guizhao², LAO Dazhong³, HU Leon⁴

1. School of Control Engineering, Northeastern University at Qinhuangdao, Qinhuangdao, Hebei, 066004;
2. State Power Investment Group Zhoukou Gas Thermal Power Co., Ltd., Zhoukou, Henan, 466200;
3. School of Aerospace Engineering, Beijing Institute of Technology, Beijing, 100081;
4. Ford Motor Company, MI 48124, Dearborn, USA

Received:2019-07-02 Online:2020-08-10 Published:2020-08-26

分体滑动导叶可调涡轮激波与载荷波动机制

杨登峰¹, 潘俞舟¹, 王贵召², 老大中³, HU Leon⁴

1. 东北大学秦皇岛分校控制工程学院, 秦皇岛, 066004;
2. 国家电投集团周口燃气热电有限公司, 周口, 466200;
3. 北京理工大学宇航学院, 北京, 100081;
4. Ford Motor Company, MI 48124, Dearborn, USA

通讯作者: 老大中(通信作者),男,1957年生,副教授。E-mail:laodazhong@tsinghua.org.cn。
作者简介:杨登峰,男,1985年生,博士、讲师。主要研究方向为热机气动热力学。
基金资助:
国家自然科学基金资助项目(51576015);中央高校基本科研业务费专项资金资助项目(N182303033)；东北大学秦皇岛分校科研启动基金资助项目(9060310952001)

Abstract

Abstract: In view of the low efficiency and strong shock characteristics of the variable nozzle turbines in a diesel engine at low speed, a split sliding guide vane was proposed and designed, and the steady/unsteady numerical calculations were carried out under three typical nozzle openings of 10%, 40% and 100%. Results show that the split sliding guide vanes may effectively restrain the clearance leakage flows and greatly improve turbine efficiency under the small nozzle openings. Under the conditions of 10% opening, the turbine peak efficiency is improved by 10%, besides, turbine efficiency is also improved to different degrees under other openings. At the same time, the trailing edge shocks of the split sliding guide vanes are greatly weakened by the reasonable design of rotor-stator spacing. The weakening of guide blade clearance leakage flows and trailing edge shocks reduces the rotor-stator interference, thus weakens the intensity of load fluctuation on downstream rotor blades and increases the reliability of rotor blades.

Key words: variable nozzle turbine, split sliding guide vane, shock, clearance leakage flow, load fluctuation

摘要： 针对某柴油机用可调涡轮在低速工况下的低效强激波特征，提出并设计了一种分体滑动导叶，并在10%、40%和100% 3个典型开度下进行了定常/非定常数值计算。结果表明：分体滑动导叶在小开度下可实现对间隙泄漏流动的有效抑制，大幅度提高涡轮效率；在10%开度下，分体滑动导叶提高了涡轮10%的峰值效率，同时涡轮效率在40%和全开工况下也有不同程度的提高。此外，通过合理设计转静间距，分体滑动导叶尾缘激波被大幅度削弱。导叶间隙泄漏流和尾缘激波的抑制可有效弱化转子定子干涉强度，降低下游转子叶片表面载荷波动幅值，提高转子叶片的可靠性。

关键词: 可调涡轮, 分体滑动导叶, 激波, 间隙泄漏流, 载荷波动

CLC Number:

TK413.5

YANG Dengfeng, PAN Yuzhou, WANG Guizhao, LAO Dazhong, HU Leon. Mechanism of Shock and Load Fluctuation of Variable Nozzle Turbines with Split Sliding Guide Vanes[J]. China Mechanical Engineering, 2020, 31(15): 1778-1786.

杨登峰, 潘俞舟, 王贵召, 老大中, HU Leon. 分体滑动导叶可调涡轮激波与载荷波动机制[J]. 中国机械工程, 2020, 31(15): 1778-1786.

References

[1] MATSUNMOTO K, JINNAI Y. Development of Variable Geometry Turbocharger for Diesel Passenger Car[C]//The 6th International Conference on Turbocharging and Air Management System. London, 1988:329-346.
[2] OKAZAKI Y, MATSUDAIRA N. A Case of Variable Geometry Turbocharger Development[C]//The Third International Conference on Turbocharging and Turbochargers. London, 1986:191-195.
[3] 马朝臣, 朱庆, 杨长茂, 等. 涡轮调节方式对增压柴油机匹配性能的影响[J]. 内燃机学报, 2000, 18(2):165-167. MA Chaochen, ZHU Qiang, YANG Changmao, et al. Effect of Turbine Adjustment Methods on Matching Performance of Turbocharged Diesel Engine[J]. Transactions of Csice, 2000, 18(2):165-167.
[4] BAINES N C. Fundamentals of Turbocharging[M]. White River Junction, Vermont:Concepts NREC, 2005.
[5] MORI I, KIYOHIRO S, KOICHI M, et al. A Study on Improving Fuel Consumption of Heavy-Duty Diesel Engine Specifically Designed for Long-Haul Trucks on Highway[J]. SAE Technical Paper, 2015-01-1256.
[6] WATSON N. Turbocharging the Internal Combustion Engine[M]. London:The Macmillan Press Ltd., 1982.
[7] LIU Y, YANG C, YANG D, et al. Investigations on the Aerodynamic Characteristics and Blade Excitations of the Radial Turbine with Pulsating Inlet Flow[J]. International Journal of Turbo & Jet-Engines, 2016, 33(1):69-80.
[8] LIU Yinhong, YANG Ce, QI Mingxu, et al. Shock, Leakage Flow and Wake Interactions in a Radial Turbine with Variable Guide Vanes[J]. ASME Paper, 2014, No. GT2014-25888.
[9] SPENCE S W T, DORAN W J, ARTT D W. Experimental Performance Evaluation of a 99.0 mm Radial Inflow Nozzled Turbine at Larger Stator-rotor Throat Area Ratios[J]. Proc. IMechE, Part A, 1999,213:205-218.
[10] DORAN W J, SPENCE S W T, ARTT D W. Experimental Performance Evaluation of a 99.0 mm Radial Inflow Nozzled Turbine with Varying Shroud Profiles[J]. Proc. IMechE, Part A, 2001,215:267-280.
[11] ALISTER S, SPENCE S W T, ARTT D W, et al. Experimental and Numerical Investigation of Varying Stator Design Paprameters for a Radial Turbine[J]. ASME Paper, 2006, No. GT2006-90152.
[12] TAMAKI H, GOTO S, UNNO M, IWAKAMI A, et al. The Effect of Clearance Flow of Variable Area Nozzle on Radial Turbine Performance[J]. ASME Paper, 2008, No. 2008-GT-50461.
[13] YANG Dengfeng, YANG Ce, LAO Dazhong, et al. A Detailed Investigation of a Variable Nozzle Turbine with Novel Forepart Rotation Guide Vane[J]. Proc. IMechE, Part D:Journal of Automobile Engineering, 2019, 233(4):994-1007.
[14] HU L J, YANG C, SUN H, et al. Numerical Analysis of Nozzle Clearance Effect on Turbine Performance[J]. Chin. J. Mech. Eng., 2011, 24(4):618-625.
[15] WALKINGSHAW J, SPENCE S, EHRHARD J, et al. A Numerical Study of the Flow Fields in a Highly Off-design Variable Geometry Turbine[J]. ASME Paper, 2010, No. GT2010-22669.
[16] CHEN H. Turbine Wheel Design for Garrett Advanced Variable Geometry Turbines for Commercial Vehicle Applications[C]//Proc. 8th International Conference of Turbochargers and Turbocharging. London, 2006:317-327.
[17] LEI Xinguo, QI Mingxu, SUN Harold, et al. Investigation on the Shock Control Using Grooved Surface in a Linear Turbine Nozzle[J]. Journal of Turbomachinery, 2017, 139(12):121008-121008-12.

Mechanism of Shock and Load Fluctuation of Variable Nozzle Turbines with Split Sliding Guide Vanes

分体滑动导叶可调涡轮激波与载荷波动机制

RichHTML

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

[1]	JIANG Zhinong1;WANG Zijia1;ZHANG Jinjie2;Huang Yifei3;MAO Zhiwei2. Fault Diagnosis Method of EDG in Nuclear Power Plants Based on Energy Operator Gradient Neighborhood Feature Extraction [J]. China Mechanical Engineering, 2021, 32(05): 617-623.
[2]	MENG Lingcun1,2;YAN Ming1;DU Zhipeng2;ZHANG Lei2. Design and Test Analysis of PMT Detonation Defensive Equipment [J]. China Mechanical Engineering, 2021, 32(05): 624-629.
[3]	DONG Guojiang;YAN Feng;HAN Jie;ZHOU Teng. Study on Relationship between Fatigue Life of Steering Knuckles and Shock Absorber Damping [J]. China Mechanical Engineering, 2020, 31(24): 2950-2958.
[4]	WU Chongjian;YAN Xiaojie;DU Kun;CHEN Zhigang;HUANG Xichun;FU Aihua;ZHENG Lijie. Integrated Design of Vibration Isolation and Anti-shock for Complex System Reconstruction by Using System Emergence [J]. China Mechanical Engineering, 2020, 31(23): 2773-2779.
[5]	HAN Ling, LIU Hongxiang, CAO Yue, REN Leilei. Model Predictive Control-based Starting Control Optimization Strategy for CVTs [J]. China Mechanical Engineering, 2020, 31(15): 1765-1771.
[6]	WANG Feixue1,2;YAO Jing1;HU Futai1,2;ZHENG Yongjiang1,2;ZANG Xinliang1,2. Mechanical-hydraulic Co-simulation of Vibration Characteristics for Forging Hydraulic Presses [J]. China Mechanical Engineering, 2020, 31(10): 1175-1182,1189.
[7]	ZHOU Nan;CHEN Gang. Dynamics Analysis of Shift Manipulators Based on Neural Network Load Fluctuation Simulation [J]. China Mechanical Engineering, 2020, 31(04): 472-481.
[8]	TANG Kai1;ZHOU Liucheng2;HE Weifeng2;WANG Wenjian1;GUO Jun1;LIU Qiyue1. Experimental Study on Influences of Laser Shock Processing on Fatigue Performance of LZ50 Axle Steels [J]. China Mechanical Engineering, 2020, 31(03): 267-273.
[9]	HUANG Xiao1,2;CAO Ziwen2;CHANG Ming1;ZOU Shikun2. Effects of Laser Shock Processing on Fatigue Performances of TC4 Titanium Alloy Single-side Laser Modification Welding Joints [J]. China Mechanical Engineering, 2018, 29(01): 104-109.
[10]	ZHOU Peng1;WU Jichun1;ZHOU Huicheng2;YANG Shiping1;LIU Jingang1;MA Qiucheng1. Study on Akima Curve-fitting Algorithm with Tool-path Based on Arc-length Parameters [J]. China Mechanical Engineering, 2017, 28(24): 2925-2930.
[11]	ZHOU Bing, LI Ning, WU Xiaojian, JIANG Gaosong. Effects of Shock Absorber Damping on Fatigue Lifes of Torsion Beams [J]. China Mechanical Engineering, 2017, 28(05): 544-549.
[12]	YU Jianqiang, DONG Xiaomin, ZHANG Zonglun. Design and Control of a Automobile Novel Magneto-rheological Shock Absorber with Asymmetric Mechanics Properties [J]. China Mechanical Engineering, 2017, 28(03): 372-377.
[13]	Hu Yong, Ji Huanyu, Wang Gongxian. Experimental Investigation on Characteristics of a Novel Hydraulic Shock Pulse Generator [J]. China Mechanical Engineering, 2016, 27(12): 1638-1642.
[14]	Song Shouxu, Zha Hui, Tian Guangtao, Yu Deqiao. Cavitation Phenomena on Crushing Effect of Tire under Ultra-high Pressure Water Jet [J]. China Mechanical Engineering, 2015, 26(9): 1205-1209,1214.
[15]	Jiang Chunlei, Han Jiaming. Gearbox Fault Diagnosis Technology Based on Mixed Interference [J]. China Mechanical Engineering, 2015, 26(19): 2619-2624.