XIONG Min;DING Xiaohong;JI Yidong;MENG Fanzhen. Hierarchy Growth Method for Optimal Design of Branching Heat Transfer Structures[J]. China Mechanical Engineering.
[1]郝俊娇,潘日,周刚,等. 高热流密度电子元件中热管散热技术的进展[J]. 化工进展,2015,34(5):1220-1231.
HAO Junjiao,PAN Ri,ZHOU Gang,et al. Development of Heat Pipe Cooling Technology in High Heat Flux Electronic Components[J]. Chemical Industry and Engineering Progress,2015,34(5):1220-1231.
[2]CHOI J,JEONG M,YOO J,et al. A New CPU Cooler Design Based on an Active Cooling Heatsink Combined with Heat Pipes[J]. Applied Thermal Engineering,2012,44(2):50-56.
[3]诸凯,王彬,王雅博,等. 用于芯片冷却的重力式热管散热器实验研究[J]. 工程热物理学报,2017,38(8):1748-1752.
ZHU Kai,WANG Bin,WANG Yabo,et al. Experimental Study of Gravity Heat Pipe Heat Sink Used for Chip Cooling[J]. Journal of Engineering Thermophysics,2017,38(8):1748-1752.
[4]KANDA R,JAIN K. Thermal Management of Low Volume Complex Electronic Systems[C]∥ Proceedings of the International Conference on Research and Innovations in Mechanical Engineering. Ludhiana,2013:519-533.
[5]BEJAN A. Constructal-theory Network of Conducting Paths for Cooling a Heat Generating Volume[J]. International Journal of Heat and Mass Transfer,1997,40(4):799-816.
[6]DING X H,YAMAZAKI K. Constructal Design of Cooling Channel in Heat Transfer System by Utilizing Optimality of Branch Systems in Nature[J]. Journal of Heat Transfer, 2007,129(3):245-255.
[7]ZHANG Y,LIU S. Design of Conducting Paths Based on Topology Optimization[J]. Heat and Mass Transfer,2008,44(10):1217-1227.
[8]ZHAO X,ZHOU M D,SIGMUND O,et al. A “Poor Man's Approach” to Topology Optimization of Cooling Channels Based on a Darcy Flow Model[J]. International Journal of Heat and Mass Transfer,2018,116:1108-1123.
[9]QIAN S H,WANG W,GE C L,et al. Topology Optimization of Fluid Flow Channel in Cold Plate for Active Phased Array Antenna[J]. Structural and Multidisciplinary Optimization,2018,57:2223-2232.
[10]崔天福,丁晓红,侯丽园. 基于密度法的传热结构拓扑优化[J]. 上海理工大学学报,2014,36(6):548-555.
CUI Tianfu,DING Xiaohong,HOU Liyuan. Structural Topology Optimization Design of Heat Transfer Based on Density Method[J]. Journal of University of Shanghai for Science and Technology,2014,36(6):548-555.
[11]XIE Y M,STEVEN G P. A Simple Evolutionary Procedure for Structural Optimization[J]. Computers and Structures,1993,49(5):885-896.
[12]张林森,丁晓红,熊敏. 基于渐进结构法的散热通道构建技术[J]. 通信电源技术,2015,32(2):13-16.
ZHANG Linsen,DING Xiaohong,XIONG Min. Construction Technology of Cooling Channel Based on Evolutionary Structural Optimization Method[J]. Telecom Power Technology,2015,32(2):13-16.
[13]SETHIAN J A,WIEGMANN A. Structural Boundary Design via Level Set and Immersed Interface Methods[J]. Journal of Computational Physics,2010,163(2):489-528.
[14]PENG Y , LIU W , CHEN W , et al. A Conceptual Structure for Heat Transfer Imitating the Transporting Principle of Plant Leaf[J]. International Journal of Heat and Mass Transfer, 2014, 71:79-90.
[15]ROUNIONS A,LANE B,PRUSINKIEWICZ P. Modeling Trees with a Space Colonization Algorithm Modeling Trees with a Space Colonization Algorithm[R]. Prague : Eurographics Workshop on Natural Phenomena,2007.
[16]ROUNIONS A,FUHRER M,LANE B,et al. Modeling and Visualization of Leaf Venation Patterns[J]. ACM Transactions on Graphics,2005,24 (3):702-711.
[17]LOHAN D J,DEDE E M,ALLISON J T. Topology Optimization for Heat Conduction Using Generative Design Algorithms[J]. Structural and Multidisciplinary Optimization,2017,55(3):1063-1077.
[18]SACK L,SCOFFONI C,MCKOWN A D,et al. Developmentally Based Scaling of Leaf Venation Architecture Explains Global Ecological Patterns[J]. Nature Communications,2012,3(1):810-837.
[19]MURRAY C D. The Physiological Principle of Minimum Work. I. the Vascular System and the Cost of Blood Volume[J]. Proceedings of the National Academy of Sciences of the United States of America,1926,12(3):207-214.