[1]张学良.机械结合面动态特性及应用[M].北京:中国科学技术出版社,2002.
ZHANG Xueliang. Dynamic Characteristics of Machine Joint Surfaces and Application[M]. Beijing: Science and Technology of China Press,2002.
[2]徐平,崔磊,于英华. 混凝土振动台动力学及自同步分析[J]. 建筑机械,2007(11):79-81.
XU Ping, CUI Lei, YU Yinghua. Dynamic and Self-synchronization Analysis of Concrete Vibration Table[J].Construction Machinery, 2007(11):79-81.
[3]LU S, CHUNG D D L. Viscoelastic Behavior of Silica Particle Compacts under Dynamic Compression[J]. Journal of Materials in Civil Engineering, 2014, 26(3):551-553.
[4]贠志达.大型混凝土振动台振动系统研究[D].西安:西安建筑科技大学,2017:45-63.
YUN Zhida.Study on Vibration System of Large Concrete Vibrating Table[D].Xi'an:Xi'an University of Architecture and Technology,2017:45-63.
[5]韩彦军,张良,张宇,等. 基于并联机构的混凝土振动台设计[J]. 混凝土与水泥制品,2016(8):73-76.
HAN Yanjun, ZHANG Liang, ZHANG Yu, et al. Design of Concrete Shaking Table Based on Parallel Mechanism[J].China Concrete and Cement Products,2016(8):73-76.
[6]宫照民,韩清凯,闻邦椿,等. 摊铺机振捣器-介质系统的运动规律和动力学特性研究[J]. 筑路机械与施工机械化,2000,17(1):6-7.
GONG Zhaomin, HAN Qingkai, WEN Bangchun,et al. Research on Movement Law and Dynamics Characteristics of Paver Vibrator-dielectric System [J]. Road Machinery & Construction Mechanization,2000,17(1):6-7.
[7]BEMPORAD A, PAGGI M. Optimization Algorithms for the Solution of the Frictionless Normal Contact between Rough Surfaces[J]. International Journal of Solids & Structures, 2015, 69/70(3):94-105.
[8]POHRT R, LI Q. Complete Boundary Element Formulation for Normal and Tangential Contact Problems[J]. Physical Mesomechanics, 2014, 17(4):334-340.
[9]FU W P, HUANG Y M, ZHANG X L, et al. Experimental Investigation of Dynamic Normal Characteristics of Machined Joint Surfaces[J]. Journal of Vibration & Acoustics, 2000,122(4):393-398.
[10]LI X, LIANG Y, ZHAO G, et al. Dynamic Characteristics of Joint Surface Considering Friction and Vibration Factors Based on Fractal Theory[J]. Journal of Vibroengineering, 2013, 15(2):872-883.
[11]汪博,孙伟,太兴宇,等. 主轴系统结合面对主轴系统动力学特性的影响分析[J].振动与冲击,2011,30(10):231-235.
WANG Bo, SUN Wei, TAI Xingyu, et al. Effect of Interfaces on Dynamic Characteristics of a Spindle System[J].Journal of Vibration and Shock, 2011,30(10):231-235.
[12]HUNG J P, LAI Y L, LUO T L, et al. Analysis of the Machining Stability of a Milling Machine Considering the effect of Machine Frame Structure and Spindle Bearings: Experimental and Finite Element Approaches[J]. International Journal of Advanced Manufacturing Technology, 2013, 68(9/12):2393-2405.
[13]HUNG J P, LAI Y S, LUO T L, et al. Effect of Drawbar Force on the Dynamic Characteristics of a Spindle-tool Holder System[J]. International Journal of Mechanical,Industrial Science and Engineering, 2014, 8(5):970-975.
[14]姜彦翠,刘献礼,吴石,等. 考虑结合面和轴向力的主轴系统动力学特性[J].机械工程学报,2015,51(19):66-74.
JIANG Yancui, LIU Xianli, WU Shi,et al. Dynamics Characteristics of the Spindle System with the Interface and Axial Milling Force[J]. Journal of Mechanical Engineering, 2015,51(19):66-74.
[15]刘雪梅,李爱平,谭顺利. HSK 刀柄主轴结合面接触特性及其影响分析[J].中国机械工程,2015,26(8):1000-1005.
LIU Xuemei, LI Aiping, TAN Shuni. Analysis of HSK Toolholder-spindle Interface Contact Characteristics and Its Effects[J]. China Mechanical Engineering, 2015, 26(8):1000-1005.
[16]崔中,文桂林,陈桂平,等. 高速磨床整机动态特性研究[J].中国机械工程,2010,21(7):782-787.
CUI Zhong, WEN Guilin, CHEN Guiping,et al. Whole Machine Dynamic Characteristic Analysis of High Speed Grinder[J].China Mechanical Engineering, 2010, 21(7):782-787.
[17]张学良,丁红钦,兰国生,等. 基于分形理论的结合面法向接触阻尼与损耗因子模型[J].农业机械学报,2013,44(6):287-294.
ZHANG Xueliang,DING Hongqin,LAN Guosheng,et al.Normal Contact Damping and Dissipation Factor Model of Joint Interfaces Based on Fractal Theory[J].Transactions of the Chinese Society for Agricultural Machinery,2013,44(6):287-294.
[18]田洪亮,刘芙蓉,方子帆,等. 引入各向同性虚拟材料的固定结合部模型[J].振动工程学报,2013,26(4):561-573.
TIAN Hongliang, LIU Furong, FANG Zifan,et al. Immovable Joint Surface's Model Using Isotropic Virtual Material[J]. Journal of Vibration Engineering, 2013,26(4):561-573. |