Design and Applications of Robotic Filament Winding CAD/CAM System
XU Jiazhong1;LIU Meijun1,2;SUN Dong1
1.School of Automation, Harbin University of Science and Technology, Harbin, 150080
2.School of Mechanical & Power Engineering, Harbin University of Science and Technology, Harbin, 150080
[1]许家忠,乔明,尤波.纤维缠绕复合材料成形原理及工艺[M].北京:科学出版社,2013:1-22.
XU Jiazhong,QIAO Ming,YOU Bo. Forming Principle and Technology of Filament Wound Composite[M]. Beijing:Science Press,2013:1-22.
[2]富宏亚,韩振宇,路华. 纤维缠绕/铺带/铺丝成形设备的发展状况[J]. 航空制造技术,2009(22):43-46.
FU Hongya,HAN Zhenyu,LU Hua. Development of the Filament Winding/Tape Layer/Fiber Placement Machine[J]. Aeronautical Manufacturing Technology,2009,22:43-46.
[3]许家忠,杨海,高良超,等.基于机器人的复合材料缠绕策略优化[J].复合材料学报,2016,33(6):1318-1326.
XU Jiazhong,YANG Hai,GAO Liangchao,et al. The Optimization of Composite Material Winding Strategy Based on Robot[J]. Acta Materiae Compositae Sinica,2016,33(6):1318-1326.
[4]蔡金刚,于柏峰,杨志忠,等. 我国纤维缠绕技术及产业发展历程与现状[J]. 玻璃钢/复合材料,2014(9):42-51.
CAI Jingang,YU Baifeng,YANG Zhizhong,et al. The Development and Present Situation of Fiber Winding Technology and Industry in China[J]. Fiber Reinforced Plastics/Composites,2014(9):42-51.
[5]祖磊,穆建桥,王继辉,等.基于非测地线纤维缠绕压力容器线型设计与优化[J].复合材料学报,2016,33(5):1125-1131.
ZU Lei,MU Jianqiao,WANG Jihui,et al.Linear Design and Optimization of Filament Wound Pressure Vessel Based on Non-geodesic Wire[J]. Acta Materiae Compositae Sinica,2016,33(5):1125-1131.
[6]韦跃峰,韩振宇,富宏亚,等.基于CATIA二次开发的T形管纤维缠绕研究[J].纤维复合材料,2015,3(4):3-7.
WEI Yuefeng,HAN Zhenyu,FU Hongya,et al.The Study on Planning Method for T Tube Based on Secondary Development of CATIA[J].Fiber Composites,2015,3(4):3-7.
[7]富宏亚,邵忠喜,韩振宇.纤维铺放轨迹规划的两种方法及其比较研究[J].材料工程,2009(增刊2):349-353.
FU Hongya,SHAO Zhongxi,HAN Zhenyu.Comparative Study on Two Methods of Fiber Placement Path Planning[J]. Journal of Materials Engineering,2009(S2):349-353.
[8]XU J Z,YANG H,LIU M J,et al.Research on Winding Trajectory Planning for Elbow Pipe Based on Industrial Robot[J]. The International Journal of Advanced Manufacturing Technology,2017,93(1/4):537-545.
[9]陈军.曲线曲面的集合约束造型与近似合并[D].杭州:浙江大学,2010.
CHEN Jun.Molding with Geometric Constraints and Approximate Merging of Curves and Surfaces[D]. Hangzhou:Zhejiang University,2010.
[10]许都,秦衡峰,周明后.基于三角网格曲面映射的数控高速加工刀轨规划[J].计算机集成制造系统,2016,22(10):2371-2379.
XU Du,QIN Hengfeng,ZHOU Minghou.CNC Machining Tool Path Panning Based on Triangular Mesh Surface Mapping[J].Computer Integrated Manufacturing Systems,2016,22(10):2371-2379.
[11]富宏亚,王显峰,韩振宇,等.复合材料缠绕后置处理方法研究[J].航空学报,2009,30(2):343-347.
FU Hongya,WANG Xianfeng,HAN Zhenyu,et al. Research on Post Disposal of Composite Winding [J]. Acta Aeronautica et Astronautica Sinica,2009,30(2):343-347.
[12]LOBO E,MACHADO J,MENDONCA J P.Development of Controller Strategies for a Robotized Filament Winding Equipment[J]. AIP Conference Proceedings,2013,1558(1):1037-1040.
[13]VALLES M,ARAUJO G P,MATA V,et al.Mechatronic Design, Experimental Setup, and Control Architecture Design of a Novel 4 DoF Parallel Manipulator[J]. Mechaincs Based Design of Structures and Machines,2018,46(4):425-439.
[14]KIM H J,KIM B K.Online Minimum-energy Trajectory Planning and Control on a Straight-line Path for Three-wheeled Omnidirectional Mobile Robots[J].IEEE Transactions on Industrial Electronics,2014,61(9):4771-4779.
[15]KORAYEM M H,NIKOOBIN A. Formulation and Numerical Solution of Robot Manipulators in Point-to-Point Motion with Maximum Load Carrying Capacity[J]. Science Iranica Transaction B-Mechanical Engineering,2009,16(1):101-109.
[16]SORRENTINO L,TERSIGNI L.Performance Index Optimization of Pressure Vessels Manufactured by Filament Winding Technology[J]. Advanced Composite Materials,2015,24(3):269-285.
[17]DING M C,DING X,ZHANG L.Research on Mechanical Wind Machine of Constant Velocity[J]. Applied Mechanics & Materials,2012,214:200-207.