Study on Surface Quality Improvement by Abrasive Water Jet Secondary-reverse Cutting
SONG Lei1,2;WU Meiping1,2;MIAO Xiaojin1,2;REN Zhonghe1
1.Mechanical Engineering Department of Jiangnan University, Wuxi, Jiangsu,214122
2.Jiangsu Province Key Laboratory of Advanced Food Manufacturing Equipment and Technology, Wuxi, Jiangsu,214122
SONG Lei1,2;WU Meiping1,2;MIAO Xiaojin1,2;REN Zhonghe1. Study on Surface Quality Improvement by Abrasive Water Jet Secondary-reverse Cutting[J]. China Mechanical Engineering.
[1]张庆良. 水射流技术及其应用[J]. 液压与气动, 2012(3):71-72.
ZHANG Qingliang. The Application of Waterjet Technology[J]. Chinese Hydraulics & Pneumatics, 201(3):71-72.
[2]何雪明, 陈泽华, 武美萍,等. 基于磨料水射流的螺杆转子加工新方法研究[J]. 中国机械工程, 2016, 27(19):2581-2588.
HE Xueming, CHEN Zehua , WU Meiping , et al. Research on a New Method for Screw Rotor Processing Using Abrasive Water Jet[J]. China Mechanical Engineering, 2016, 27(19):2581-2588.
[3]吴海,刘波,王国涛,等. 磨料水射流切割技术分析及研究[J]. 机械管理开发,2010,25(4):9-10.
WU Hai,LIU Bo,WANG Guotao,et al. Research and Analysis of Abrasive Water Jet Cutting Technology[J]. Mechanical Management and Development,2010,25(4):9-10.
[4]HASHISH M. A Modeling Study of Metal Cutting with Abrasive Waterjets[J]. Journal of Engineering Materials & Technology Transactions of the ASME,1984,106(1):88.
[5]SIORES E,CHEN L,WONG W.C.K,et al. Improving Surface Finish Generated by the Abrasive Waterjet Process[C]//Advances in Abrasive Technology. Swinburne, 1997:187-191.
[6]CHEN L,SIORES E,WONG W C K. Optimising Abrasive Waterjet Cutting of Ceramic Materials[J]. Journal of Materials Processing Technology,1998,74(1/3):251-254.
[7]XU S,WANG J. A Study of Abrasive Waterjet Cutting of Alumina Ceramics with Controlled Nozzle Oscillation[J]. International Journal of Advanced Manufacturing Technology,2006,27(7/8):693-702.
[8]LEMMA E,CHEN L,SIORES E,et al. Optimising the AWJ Cutting Process of Ductile Materials Using Nozzle Oscillation Technique[J]. International Journal of Machine Tools & Manufacture,2002,42(7):781-789.
[9]杨林,张凤华,唐川林. 磨料水射流切割断面质量的研究[J]. 机械设计与研究,2003,19(5):54-56.
YANG Lin,ZHANG Fenghua,TANG Chuanlin. A Study of the Surface Quality Cut by Abrasive Waterjet[J]. Machine Design and Research,2003,19(5):54-56.
[10]冯衍霞,黄传真,WANG J,等. 磨料水射流加工技术的研究现状[J]. 机械工程师,2005,25(6):17-19.
FENG Yanxia,HUANG Chuanzhen,WANG J,et al. The Research Situation of Abrasive Waterjet Machining Technology[J]. Mechanical Engineer,2005,25(6):17-19.
[11]赵永赞,高凤阳,王春雷,等.基于后混合式磨料水射流切割机理的探讨[J]. 常熟高专学报,2004,18(2):50-53.
ZHAO Yongzan,GAO Fengyang,WANG Chunlei. Experimental Research on the Mechanism of Cutting Materials with Rear Fixed Abrasive Efflux[J]. Journal of Changshu College,2004,18(2):50-53.
[12]MM I W,AZMI A I,LEE C C,et al. Kerf Taper and Delamination Damage Minimization of
FR Hybrid Composites under Abrasive Water-jet Machining[J]. International Journal of Advanced Manufacturing Technology,2018,94(5/8):1727-1744.
[13]HASHISH M. Visualization of the Abrasive-waterjet Cutting Process[J]. Experimental Mechanics,1988,28(2):159-169.
[14]GUPTA V,PANDEY P M,GARG M P,et al. Minimization of Kerf Taper Angle and Kerf Width Using Taguchi's Method in Abrasive Water Jet Machining of Marble[J]. Procedia Materials Science,2014,6: 140-149.
[15]ALBERDI A,Surez A,ARTAZA T,et al. Composite Cutting with Abrasive Water Jet [J]. Procedia Engineering,2013, 63:421-429.
[16]GUPTA V,GARG M P,BATRA N K,et al. Analysis of Kerf Taper Angle in Abrasive Water Jet Cutting of Makrana White Marble[J]. Asian Journal of Engineering and Applied Technology,2013,2(2): 35-39.