[1]ALLWOOD J M, CULLEN J M, MILFORD R L. Options for Achieving a 50% Cut in Industrial Carbon Emissions by 2050 [J]. Environmental Science & Technology, 2010, 44(6): 1888-1894.
[2]ALLWOOD J M, ASHBY M F, GUTOWSKI T G, et al. Material Efficiency: a White Paper [J]. Resources, Conservation and Recycling, 2011, 55(3): 362-381.
[3]ALLWOOD J M, ASHBY M F, GUTOWSKI T G, et al. Material Efficiency: Providing Material Services with Less Material Production [J]. Philos Trans. A. Math. Phys. Eng. Sci., 2013, 371(1986): 20120496.
[4]GUTOWSKI T G, SAHNI S, ALLWOOD J M, et al. The Energy Required to Produce Materials: Constraints on Energy-intensity Improvements, Parameters of Demand [J]. Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 2013, 371(1986): 20120003.
[5]IEA (International Energy Agency). Energy Technology Perspectives 2008: Scenarios & Strategies to 2050[S]. Paris: OECD/IEA, 2008.
[6]陈铭. 汽车产品的回收利用[M]. 上海:上海交通大学出版社,2017.
CHEN Ming. Recycling of Automotive Products[M]. Shanghai: Shanghai Jiao Tong University Press, 2017.
[7]陈铭. 报废汽车回收再利用教程[M]. 上海:上海交通大学出版社,2017.
CHEN Ming. Automotive Recycling Textbook[M]. Shanghai: Shanghai Jiao Tong University Press, 2017.
[8]TIAN J, CHEN M. Sustainable Design for Automotive Products: Dismantling and Recycling of End-of-life Vehicles[J]. Waste Management, 2014, 34(2): 458-467.
[9]ZHANG H, CHEN M. Triboelectrostatic Separation for PP and ABS Plastics in End of Life Passenger Vehicles [J]. Journal of Material Cycles and Waste Management, 2017, 19(2): 884-897.
[10]ZHANG H, CHEN M. Theoretical Analysis and Experimental Study on the Coating Removal from Passenger-vehicle Plastics for Recycling by Using Water Jet Technology [J]. JOM, 2015, 67(11): 2714-2726.
[11]ZHANG H, CHEN M. Current Recycling Regulations and Technologies for the Typical Plastic Components of End-of-life Passenger Vehicles: a Meaningful Lesson for China [J]. Journal of Material Cycles and Waste Management, 2014, 16(2): 187-200.
[12]ZHAO Q, CHEN M. Characterization of Automobile Plastics by Principal Component Analysis and Near-infrared Spectroscopy [J]. Analytical Letters, 2015, 48(2): 301-307.
[13]ZHAO Q, CHEN M. Automotive Plastic Parts Design, Recycling, Research, and Development in China [J]. Journal of Thermoplastic Composite Materials, 2015, 28(1): 142-157.
[14]SU H, CHEN M. Magnetic Memory Signal Changes of 45 Steel in the Process of Fatigue [J]. International Journal of Applied Electromagnetics and Mechanics, 2016, 52(3/4): 1623-1628.
[15]SU H, CHEN M. Experimental and Theoretical Analysis of Metal Magnetic Memory Signals in the Stress Concentration Area of 45 Steel under Tensile Testing [J]. International Journal of Applied Electromagnetics and Mechanics, 2014, 46(1): 271-280.
[16]刘志超. 发动机原始制造与再制造全生命周期评估方法 [D]. 大连: 大连理工大学, 2013.
LIU Zhichao. Life Cycle Assessment Methodology of Original Manufacturing and Remanufacturing of an Engine[D]. Dalian: Dalian University of Technology, 2013.
[17]ZHANG J H, CHEN M. Assessing the Impact of China's Vehicle Emission Standards on Diesel Engine Remanufacturing [J]. Journal of Cleaner Production, 2015, 107: 177-184.
[18]HAN J, HAYASHI Y. Assessment of Private Car Stock and Its Environmental Impacts in China from 2000 to 2020 [J]. Transportation Research Part D, 2008, 13(7):471-478.
[19]DARGAY J, GATELY D, SOMMER M. Vehicle Ownership and Income Growth, Worldwide: 1960-2030 [J]. Energy Journal, 2007, 28(4):143-170.
[20]ZHANG C, CHEN M. Prioritising Alternatives for Sustainable End-of-life Vehicle Disassembly in China Using AHP Methodology [J]. Technology Analysis & Strategic Management, 2018, 30(5): 556-568.
[21]ZHANG C, CHEN M. Designing and Verifying a Disassembly Line Approach to Cope with the Upsurge of End-of-life Vehicles in China[J]. Waste Management, 2018, 67: 697-707.
[22]TIAN J, CHEN M. Assessing the Economics of Processing End-of-life Vehicles through Manual Dismantling [J]. Waste Management, 2016, 56:384-395.
[23]PEHLKEN A, STEVEN B. YOUNG S B, CHEN M. Assessing and Managing Life Cycles of Electric Vehicles-preface [J]. The International Journal of Life Cycle Assessment, 2017,22(1):1-3.
[24]HARDER M K, FORTON O T. A Critical Review of Developments in the Pyrolysis of Automotive Shredder Residue [J]. Journal of Analytical and Applied Pyrolysis, 2007, 79(1/2): 387-394.
[25]NI F, CHEN M. Research on ASR in China and Its Energy Recycling with Pyrolysis Method [J]. Journal of Material Cycles and Waste Management, 2014, 17(1): 107-117.
[26]NI F, CHEN M. Studies on Pyrolysis and Gasification of Automobile Shredder Residue in China [J]. Waste Manage. Res., 2014, 32(10): 980-987.
[27]TIAN J, NI F, CHEN M. Application of Pyrolysis in Dealing with End-of-life Vehicular Products: a Case Study on Car Bumpers [J]. Journal of Cleaner Production, 2015, 108:1177-1183. |