[1]陶春虎,钟培道,王仁智,等. 航空发动机转动部件的失效与预防[M]. 北京:国防工业出版社,2000:6-18.
TAO Chunhu, ZHONG Peidao, WANG Renzhi, et al. Failure Analysis and Prevention for Rotor in Aero-engine[M]. Beijing:National Defence Industry Press, 2000:6-18.
[2]石可重,赵晓路,徐建中. 重力载荷下风电叶片疲劳数值计算方法研究[J]. 太阳能学报, 2013, 34(2):181-185.
SHI Kezhong, ZHAO Xiaolu, XU Jianzhong. Research on Fatigue Numerical Calculation Method of Wind Turbine under Gravity Load[J]. Acta Energiae Solaris Sinica, 2013, 34(2):181-185.
[3]LEYLEK Z, NEELY A J. Development of a Blade Parametric Modeling Methodology for Design and Analysis of Computer Experiments [C]//ASME Turbo Expo 2015:Turbine Technical Conference and Exposition. American Society of Mechanical Engineers. Montreal, 2015:V02BT39A030.
[4]YUNZ, ZHI T C, TAO N. Reverse Modeling Strategy of Aero-engine Blade Based on Design Intent [J]. The International Journal of Advanced Manufacturing Technology, 2015, 81(9/12):1781-1796.
[5]NI K, WANG X Q, MIGNOLET M. Blade Stress Estimation during Multiple Vibratory Modes[C]//Structures, Structural Dynamics, and Materials Conferences. Boston, 2013:2013-1772.
[6]张强升. 某燃机动叶及压气机组件应力计算与振动分析[D].北京:清华大学, 2011.
ZHANG Shengqiang. Stress Calculation and Vibration Analysis of the Gas Turbine Rotor Blade and Compressor Assembly[D]. Beijing:Tsinghua University, 2011.
[7]栗玉领,徐胜利,杨树桦,等. 非典型气动荷载下压缩机叶轮疲劳强度分析[J]. 机械工程学报, 2015, 51(9):82-89.
LI Yuling, XU Shengli, YANG Shuhua, et al. Fatigue Strength Analysis of Compressor Impeller under Non-typical Aerodynamic Load [J]. Journal of Mechanical Engineering, 2015, 51(9):82-89.
[8]DHOPADE P, NEELY A J. Aeromechanical Modeling of Rotating Fan Blades to Investigate High-cycle and Low-cycle Fatigue Interaction [J]. Journal of Engineering for Gas Turbines and Power, 2015, 137(5):052505.
[9]BRANDSENJ D. Prediction of Axial Compressor Blade Vibration by Modelling Fluid-structure Interaction [D]. Stellenbosch:Stellenbosch University, 2013.
[10]陶海亮,朱阳历,郭宝亭,等. 压气机叶片流固耦合数值计算[J]. 航空动力学报, 2012, 27(5):1054-1060.
TAO Hailiang, ZHU Yangli, GUO Baoting, et al. Numerical Simulation of Aeroelastic Response in Compressor Based on Fluid-structure Coupling[J]. Journal of Aerospace Power, 2012, 27(5):1054-1060.
[11]SONG X, WANG L, NIINOMI M, et al. Fatigue Characteristics of a Biomedical β-type Titanium Alloy with Titanium Boride [J]. Materials Science and Engineering:A, 2015, 640:154-164.
[12]RABOTNOVY N, LECKIE F A, PRAGER W. Creep Problems in Structural Members[J]. Journal of Applied Mechanics, 1969, 37(1):249.
[13]CHABOCHEJ L, LESNE P M. A Non-linear Continuous Fatigue Damage Model [J]. Fatigue & Fracture of Engineering Materials & Structures, 1988, 11(1):1-17.
[14]林杰威. 涡扇发动机风扇叶片疲劳寿命评估与可靠性分析[D].天津:天津大学, 2013.
LIN Jiewei. Research on Fatigue Life Estimation and Reliability Analysis of Turbofan Engine Fan Blade[D]. Tianjin:Tianjin University, 2013.
[15]岳珠峰. 镍基单晶涡轮叶片结构强度设计[M]. 北京:科学出版社,2008:213-232.
YUE Zhufeng.Structural Strength Design of Nickel Based Single Crystal Turbine Blade[M]. Beijing:Science Press, 2008:213-232.
[16]中华人民共和国航空工业部.HB 5277-84 发动机叶片及材料振动疲劳试验方法[S]. 北京:中国标准出版社,1984.
Ministry of Aviation Industry of China, HB 5277-84 Test Method for Vibration and Fatigue of Engine Blades and Materials[S]. Beijing:Standards Press of China, 1984. |