[1]汪洪,李颖,田仁. 多排滚子转盘轴承承载能力的计算[J]. 轴承,2012(2):8-11.
WANG Hong,LI Ying,TIAN Ren. Calculation of Load Capacity for Multi-row Roller Slewing Bearings[J]. Bearing, 2012(2):8-11.
[2]黄浩,张鹏顺,温建民. 高速圆柱滚子轴承的刚度研究[J]. 中国机械工程, 2001,12(11):44-46.
HUANG Hao,ZHANG Pengshun,WEN Jianmin. Study of Stiffness of High-speed Cylindrical Roller Bearing[J]. China Mechanical Engineering, 2001,12(11):44-46.
[3]陈家庆,张富辉,周永新. 线接触问题的弹性趋近量与滚子轴承的载荷分布[J]. 机械设计与制造, 2003(3):40-42.
CHEN Jiaqing,ZHANG Fuhui,ZHOU Yongxin. The Elastic Approach for Linear Contact Problem and Roller Bearing's Load Distribution[J]. Machinery Design & Manufacture, 2003(3):40-42.
[4]姜笑颖,张钢,支汗立,等. 特种推进器用三排圆柱滚子式转盘轴承的负荷分析[J]. 机械制造与自动化, 2015,44(6): 74-78.
JIANG Xiaoying,ZHANG Gang,ZHI Hanli,et al. Load Distribution Analysis of Three-row Cylindrical Roller Slewing Bearing for Special Propeller[J]. Machine Building & Automation, 2015,44(6):74-78.
[5]张建. 基于柔性支撑的转盘轴承性能及结构参数研究[D]. 大连:大连理工大学,2015.
ZHANG Jian. Research on Performance and Structural Parameters of Slewing Bearing with Flexible Supporting Structures[D].Dalian :Dalian University of Technology,2015.
[6]龚国伟.风电机组法兰螺栓连接建模与仿真技术研究[D]. 重庆:重庆大学,2014.
GONG Guowei. Modeling and Simulink Research about the Flange Bolts Connection of Wind Turbine[D]. Chongqing :Chongqing University,2014.
[7]POTOC NIK R, GNCZ P, GLODE S. Static Capacity of a Large Double Row Slewing Ball Bearing with Predefined Irregular Geometry[J]. Mechanism and Machine Theory, 2013, 64(6): 67-79.
[8]KANIA L. Modelling of Rollers in Calculation of Slewing Bearing with the Use of Finite Elements[J].Mechanism and Machine Theory,2006,41(11):1359-1376.
[9]GNCZ P, ULBIN M, GLODE S. Computational Assessment of the Allowable Static Contact Loading of a Roller-slewing Bearing's Case-hardened Raceway[J]. International Journal of Mechanical Sciences,2015,S94-95:174-184.
[10]AGUIRREBEITIA J, ABASOLO M, AVILS R, et al. Theoretical Calculation of General Static Load-carrying Capacity for the Design and Selection of Three Row Roller Slewing Bearings[J]. Mechanism and Machine Theory,2012,48(1):52-61. |