[1]王修岩,杨森,李宗帅.电动负载模拟系统的复合控制器设计[J].微特电机,2014,42(12):62-65.
WANG Xiuyan, YANG Sen, LI Zongshuai. Design of Compound Controller for Electric Load Simulation System[J]. Micro Motor, 2014, 42(12):62-65.
[2]薄志峰.基于LabWindows/CVI的电动舵机自动化测试系统设计[J].国外电子测量技术,2015,34(5):66-69.
BO Zhifeng. Design of Automatic Test System for Electric Actuator Based on LabWindows/CVI[J]. Foreign Electronic Measurement Technology, 2015, 34(5):66-69.
[3]周明广,于云峰,闫杰.直线舵机加载台控制系统建模与设计[J].测控技术,2011,30(6):53-60.
ZHOU Mingguang, YU Yunfeng, YAN Jie. Modeling and Design of Control System for Linear Servo Drive[J]. Measurement and Control Technology, 2011, 30(6):53-60.
[4]陈幼平,杜志强,艾武,等.一种短行程直线电机的数学模型及其实验研究[J].中国电机工程学报,2005,25(7):131-136.
CHEN Youping, DU Zhiqiang, AI Wu, et al. Mathematical Model and Experimental Study of a Short Stroke Linear Motor[J]. Journal of China Electromechanical Engineering, 2005,25(7):131-136.
[5]李瑞,王明艳.舵机电动负载模拟器的建模与仿真[J].传感器世界,2012,18(8):12-15.
LI Rui, WANG Mingyan. Modeling and Simulation of Electric Load Simulator for Servo[J]. Sensor World, 2012, 18(8):12-15.
[6]杨永迪.MATLAB下BP PID控制器的C实现[J].科技风,2014,27(9):68.
YANG Yongdi. C Realization of BP PID Controller under MATLAB [J]. Science and Technology Winds, 2014, 27(9):68.
[7]谢明.神经网络二自由度PID控制器设计[J].导弹与制导学报,2009,29(6):31-34.
XIE Ming. Design of Neural Network Two Degree of Freedom PID Controller[J]. Journal of Missile and Guidance, 2009, 29(6):31-34.
[8]孟庆贤,李甲申.二自由度PID控制及应用[J].基础自动化,1997,4(1):10-46.
MENG Qingxian, LI Jiashen. Two Degrees of Freedom PID Control and Application[J]. Basic Automation, 1997, 4(1):10-46. |