[1]Howell L L.Compliant Mechanisms[M].New York:John Wiley & Sons,2001.
[2]Yoo K S,Han S Y.Topology Optimum Design of Compliant Mechanisms Using Modified Ant Colony Optimization[J].Journal of Mechanical Science and Technology,2015,29(8):3321-3327.
[3]张宪民.柔顺机构拓扑优化设计[J].机械工程学报,2003,39(11):47-51.
Zhang Xianmin. Topology Optimization of Compli-ant Mechanisms[J]. Chinese Journal of Mechanical Engineering,2003,39(11):47-51.
[4]陈贵敏,李端玲.平面柔顺机构的自由度[J].机械工程学报,2010,46(13):48-53.
Chen Guimin,Li Duanling.Degree of Freedom of Planar Compliant Mechanisms[J].Journal of Mechanical Engineering,2010,46(13):48-53.
[5]秦振,阎绍泽.压电陶瓷驱动微小型步行机的设计与仿真研究[J].机械设计与研究,2004,20(4):14-17.
Qin Zhen,Yan Shaoze.Design and Simulation Research of a Miniature Robot Drive by Piezoelectric Actuator[J]. Machine Design and Research,2004,20(4):14-17.
[6]Friedrich R,Lammering R,Heurich T. Nonlinear Modeling of Compliant Mechanisms Incorporating Circular Flexure Hinges with Finite Beam Elements[J]. Precision Engineering,2015,42:73-79.
[7]王华伟,余跃庆,苏丽颖,等.柔顺机构动力学建模新方法[J].机械工程学报,2008,44(10):96-103.
Wang Huawei,Yu Yueqing,Su Liying,et al.New Method for the Dynamic Modeling of Compliant Mechanism[J]. Journal of Mechanical Engineering,2008,44(10):96-103.
[8]Ahuett-Garza H,Chaides O,Garcia P N,et al.Studies about the Use of Semicircular Beams as Hinges in Large Deflection Panar Compliant Mechanisms[J]. Precision Engineering,2014,38(4):711-727.
[9]Howell L L,Midha A,Noron T W.Evaluation of Equivalent Spring Stiffness for Use in a Pseudo-rigid-body Model of Large-deflection Compliant Mechanisms[J].Journal of Mechanical Design,1996,118(1):126-131.
[10]Howell L L,Midha A. Parametric Deflection Approximations for End-loaded,Large-deflection Beams in Compliant Mechanisms[J]. Journal of Mechanical Design,1995,117(1):156-165.
[11]Dado M H.Variable Parametric Pseudo-rigid-body Model for Large-deflection Beams with End Loads[J]. International Journal of Non-Linear Mecha-nics,2001,36(7):1123-1133.
[12]冯忠磊,余跃庆,王雯静.模拟柔顺机构中柔顺杆件末端特征的2R伪刚体模型[J].机械工程学报,2011,47(1):36-42.
Feng Zhonglei,Yu Yueqing,Wang Wenjing.2R Pseudo-rigid-body Model of Compliant Mechani-sms with Compliant Links to Simulate Tip Characteristic[J]. Journal of Mechanical Engineering,2011,47(1):36-42.
[13]Su H J.A Pseudorigid-body 3R Model for Determining Large Deflection of Cantilever Beams Subject to Tip Loads[J].Journal of Mechanisms and Robotics,2009,1(2):795-810.
[14]Su H J.A Load Independent Pseudo-rigid-body 3R Model for Determining Large Deflection of Beams in Compliant Mechanisms[C]//ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. New York:ASME,2008:109-121.
[15]余跃庆,周鹏.柔顺机构PR伪刚体模型[J].北京工业大学学报,2013,39(5):641-647.
Yu Yueqing,Zhou Peng.PR Pseudo-rigid-body Model of Compliant Mechanisms[J].Journal of Beijing University of Technology,2013,39(5):641-647.
[16]余跃庆,徐齐平,周鹏.复合载荷作用下柔顺机构的PR伪刚体新模型[J].机械工程学报,2013,49(15):9-14.
Yu Yueqing,Xu Qiping,Zhou Peng.New PR Pseudo-rigid-body Model of Compliant Mechanisms Subject to Combined Loads[J].Journal of Mechanical Enginee-ring,2013,49(15):9-14.
[17]Wang N,Liang X,Zhang X.Pseudo-rigid-body Model for Corrugated Cantilever Beam Used in Compliant Mechanisms[J]. Chinese Journal of Mechanical Eng-ineering,2014,27(1):122-129.
|