[1]黄科元,周滔滔,黄守道,等.含前馈补偿和微分反馈的数控位置伺服系统[J].中国机械工程,2014,25(15):2017-2023.
Huang Keyuan, Zhou Taotao, Huang Shoudao, et al. CNC Position Servo System with Feedforward Compensation and Differential Feedback[J]. China Mechanical Engineering, 2014, 25(15):2017-2023.
[2]Mohamed Y A I. Adaptive Self-tuning Speed Control for Permanent-magnet Synchronous Motor Drive with Dead Time[J]. IEEE Transactions on Energy Conversion, 2006, 21(4): 855-862.
[3]蒋学程,彭侠夫,何栋炜.永磁同步电机模型补偿组合非线性反馈位置控制[J].中国电机工程学报,2012,32(3):89-95.
Jiang Xuecheng, Peng Xiafu, He Dongwei. Permanent Magnet Synchronous Motor Position Control Using Composite Nonlinear Feedback with Model Compensation[J]. Proceedings of the CSEE, 2012, 32(3): 89-95.
[4]Lai C, Shyu K. A Novel Motor Drive Design for Incremental Motion System via Sliding-mode Control Method[J]. IEEE Transactions on Industrial Electronics, 2005, 52(2): 499-507.
[5]方斯琛,周波.滑模控制的永磁同步电机伺服系统一体化设计[J]. 中国电机工程学报,2009,29(3):96-101.
Fang Sichen, Zhou Bo. Integrated Design for Permanent Magnet Synchronous Motor Servo Systems Based on Sliding Mode Control[J]. Proceedings of the CSEE, 2009, 29(3): 96-101.
[6]Tsai M, Lin M, Yau H. Development of Comand- based Iterative Learning Control Algorithm with Consideration of Friction,Disturbance,and Noise Effects [J]. IEEE Transactions on Control Systems Technology, 2006, 14(3): 511-518.
[7]赵希梅,郭庆鼎.为提高轮廓加工精度采用DOB和ZPETC的直线伺服鲁棒跟踪控制[J].电工技术学报,2006,21(6):111-114.
Zhao Ximei, Guo Qingding. Linear Servo Robust Tracking Control Based on DOB and ZPETC to Improve the Contour Machining Precision[J]. Transactions of China Electrotechnical Society, 2006, 21(6): 111-114.
[8]郑颖,马大为,姚建勇,等.火箭炮位置伺服系统自抗扰控制[J].兵工学报,2014,35(5):597-603.
Zheng Ying, Ma Dawei, Yao Jianyong, et al.Active Disturbance Rejection Control for Position Servo System of Rocket Launcher [J]. Acta Armamenta-rii, 2014, 35(5): 597-603.
[9]孙凯,许镇琳,盖廓,等.基于自抗扰控制器的永磁同步电机位置伺服系统[J]. 中国电机工程学报,2007,27(15):43-46.
Sun Kai, Xu Zhenlin, Gai Kuo, et al. A Novel Position Controller of PMSM Servo System Based on Active-disturbance Rejection Controller[J]. Proceedings of the CSEE, 2007, 27(15): 43-46.
[10]白长瑞,张舟,赵岩.一种基于NTD的ISP框架相对角速度测量方法[J].仪器仪表学报,2012,33(9):1945-1951.
Bai Changrui, Zhang Zhou, Zhao Yan. NTD Based Measurement Method of the Relative Angular Velocity of ISP Gimbal[J]. Chinese Journal of Scientific Instrument, 2012, 33(9): 1945-1951.
[11]韩京清.自抗扰控制器及其应用[J]. 控制与决策,1998,13(1):19-23.
Han Jingqing. The Auto-disturbance Rejection Controller and Its Application[J]. Control and Decision, 1998, 13 (1):19-23.
[12]Han Jingqing. From PID to Active Disturbance Rejection Control[J]. IEEE Transactions on Industrial Electronics, 2009, 56(3): 900-906.
[13]于家斌,王小艺,许继平,等.基于跟踪微分器的永磁同步电主轴电流控制算法[J]. 中国机械工程,2014,25(2):191-196.
Yu Jiabin, Wang Xiaoyi, Xu Jiping, et al. Current Control Algorithm of Permanent Magnet Synchronous Spindle Based on Tracking-Differentiator [J].China Mechanical Engineering, 2014, 25 (2):191-196.
[14]黄浦,修吉宏,李军,等.航空相机镜筒全程快速无超调位置控制[J] .光学精密工程, 2013,21(10):2574-2580.
Huang Pu, Xiu Jihong, Li Jun, et al. Fast Position Control of the Lensbarrels of Aerial Cameras without Overshoots in Omnirange[J]. Opt. Precision Eng., 2013, 21(10): 2574-2580.
|