Previous Articles Next Articles
Wu Jinbo;Song Yuchen
Online:
2016-08-10
Published:
2016-08-10
吴金波;宋宇宸
基金资助:
CLC Number:
Wu Jinbo, Song Yuchen. Design and Analysis of Active Heave Compensation System for Offshore Cranes[J]. China Mechanical Engineering.
吴金波, 宋宇宸. 海上作业起重机主动升沉补偿系统的设计与分析[J]. 中国机械工程.
[1]曾智刚. 波浪运动升沉补偿液压平台关键问题试验研究[D].广州:华南理工大学, 2010. [2]王海波, 王庆丰. 拖体被动升沉补偿系统非线性建模及仿真[J].浙江大学学报(工学版), 2008, 42(9): 1568-1572. Wang Haibo, Wang Qingfeng. Non-linear Modeling and Simulation of Towed Body Passive Heave Compensation System[J]. Journal of Zhejiang University(Engineering Science), 2008, 42(9): 1568-1572. [3]Zheng H, Liu S, Hu Q. Simulation of Fuzzy PID Control of Heave Compensation System for Deep-ocean Mining[J]. World Journal of Modelling and Simulation, 2012, 8(1): 50-57. [4]吴百海, 肖体兵, 龙建军,等. 深海采矿装置的自动升沉补偿系统的模拟研究[J].机械工程学报, 2003, 39(7): 128-133. Wu Baihai,Xiao Tibin,Long Jianjun,et al.Simulation Study on Automatic Heave Compensation System for Deep-ocean Mining Equipment[J]. Chinese Journal of Mechanical Engineering, 2003, 39(7): 128-133. [5]张大兵, 乌建中, 郑福来,等. 船用起重机升沉补偿系统建模与仿真[J].中国机械工程, 2012, 23(7): 794-797. Zhang Dabing,Wu Jianzhong,Zheng Fulai,et al.Modeling and Simulation on Heave Compensation System of Ship-mounted Crane[J]. China Mechanical Engineering, 2012, 23(7): 794-797. [6]Rexroth Bosch Group. Secondary Control with A4VSO/G Axial Piston Units. http://www.boschrexroth.com/en/xc/products/product-groups/industrial-hydraulics/secondary-control/ documentation-and-tools/documentation-and-downloads-9. [7]战兴群. 静液驱动二次调节技术控制特性的研究[D].哈尔滨:哈尔滨工业大学, 2003. [8]王春行. 液压控制系统[M].北京:机械工业出版社, 2010. [9]马登成, 杨士敏, 胡永彪. 静液二次调节加载系统动态性能分析[J].计算机仿真,2010, 27(4): 300-303. Ma Dengcheng,Yang Shimin,Hu Yongbiao.Study on Dynamic Characteristics of a Secondary Regulated Loading System[J]. Computer Simulation, 2010, 27(4): 300-303. [10]Nestegard A, Boe T. Modeling and Analysis of Marine Operations[S]. Det Norske Veritas, Norway, Recommended Practice DNV-RP-H103, 2011. [11]Küchler S, Mahl T,Neupert J,et al.Active Control for an Offshore Crane Using Prediction of the Vessel’s Motion[J]. IEEE/ASME Trans. on Mechatronics, 2011, 16(2): 297-309. [12]滕福林, 胡育文, 刘洋,等.位置/电流两环结构位置伺服系统的跟随性能[J].电工技术学报, 2009, 24(10): 40-46. Teng Fulin,Hu Yuwen ,Liu Yang,et al. Tracking Performance of Position Servo System Only with Position and Current Loops[J]. Transactions of China Electrotechnical Society, 2009, 24(10): 40-46. [13]陈伯时. 电力拖动自动控制系统-运动控制系统[M].北京:机械工业出版社,2004. [14]焦宗夏,华清,王晓东,等. 电液负载模拟器的复合控制[J].机械工程学报,2002, 38(12): 34-38. Jiao Zongxia,Hua Qing,Wang Xiaodong, et al.Hybrid Control on the Electrohydraulic Load Simulator[J].Chinese Journal of Mechanical Engineering, 2002, 38(12): 34-38. |
[1] | WENG Jian, ZHUANG Kejia, PU Donglin, DING Han, . Plunge Milling of Titanium Alloys Based on Machine Learning and Multi-objective Optimization [J]. China Mechanical Engineering, 2021, 32(07): 771-777. |
[2] | PEI Zhi, DAI Xu, YUAN Yilun, YI Wenchao, CHEN Yong. Dynamic Resource Allocation of Manufacturing Network for Emergency Equipment [J]. China Mechanical Engineering, 2021, 32(07): 839-848. |
[3] | GUO Baosu;ZHUANG Jichao;ZHANG Qin;WU Fenghe. Color Difference Detection of Polycrystalline Wafers Based on Multi-component Convolution Neural Network [J]. China Mechanical Engineering, 2021, 32(03): 297-304. |
[4] | WANG Yingcong1;ZHANG Ling1;XIAO Renbin2. A Flexible Position Selection Algorithm for Solving ECPP [J]. China Mechanical Engineering, 2021, 32(03): 305-313. |
[5] | TIAN Sukun1;DAI Ning1;YUAN Fulai1;SUN Yuchun2;YU Qing3;CHENG Xiaosheng1. Functional Occlusal Surface Morphology Design Method for Missing Teeth Based on CGAN [J]. China Mechanical Engineering, 2021, 32(03): 331-340. |
[6] | QIU Yongtao1;JI Weixi1,2;ZHANG Chaoyang1,2. Multi-objective Job Shop Scheduling Based on Hybrid Evolutionary Algorithm and Knowledge [J]. China Mechanical Engineering, 2020, 31(24): 2979-2987. |
[7] |
SUN Dianzhu1;SHEN Jianghua1;JIA Zongfu1;LI Yanrui2;LIN Wei1.
Scattering Point Cloud Local Topography Frame Quantization and Feature Recognition Method
[J]. China Mechanical Engineering, 2020, 31(19): 2332-2339.
|
[8] | WANG Guan1;ZHANG Qian2;KOU Linyuan1;LIU Zhiwen3;LI Shikang3. Nonlinear Topology Optimization of Continuum Structures Based on HCA Algorithm [J]. China Mechanical Engineering, 2020, 31(18): 2161-2173. |
[9] | DAI Wen1;ZHANG Chaoyong1;MENG Leilei1;XUE Yanshe1;XIAO Pengfei1;YIN Yong2. Prediction Model of Milling Cutter Wear Status Based on Deep Learning [J]. China Mechanical Engineering, 2020, 31(17): 2071-2078. |
[10] | YUE Caixu;LIU Xin;LIU Zhibo;XIE Na;WANG Yanwu. Tool Optimization for Splicing Die Milling Processes Based on Finite Element Simulation [J]. China Mechanical Engineering, 2020, 31(17): 2085-2094. |
[11] | PANG Shibao1;GUO Shunsheng1;WANG Lei1;LI Xixing2. Construction Method of Workshop Manufacturing Service Collaboration Chains for Mass Personalization Manufacturing [J]. China Mechanical Engineering, 2020, 31(17): 2104-2111. |
[12] | ZHANG Wenxu, XIAO Renbin, LIN Wenguang. Review Data Driven Customer Need Model Research Based on Product Performance Lexicon [J]. China Mechanical Engineering, 2020, 31(15): 1866-1876. |
[13] | WANG Falin, GUO Xuepeng, LI Zhinong, SONG Likang. Automatic Extraction Method for Corresponding Relationship among Endpoint-to-location of Cable Wiring under Coordinate System Guidance [J]. China Mechanical Engineering, 2020, 31(14): 1708-1716. |
[14] | WEI Dinghui;WANG Huifen;LIU Linyan. Visual Monitoring System for Small and Medium-sized Automatic Production Lines [J]. China Mechanical Engineering, 2020, 31(11): 1351-1359. |
[15] | JIANG Shaofei;WU Tianji;PENG Xiang;LI Jiquan;LI Zhi;SUN Tao. Data Driven Fault Diagnosis Method Based on XGBoost Feature Extraction [J]. China Mechanical Engineering, 2020, 31(10): 1232-1239. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||