[1]李延杰,吴明月. 硅片传输机器人手臂结构优化设计方法[J].机械工程学报,2014,36(4):30-33.
Li Yanjie, Wu Mingyue.Method for Structural Optimization Design of Wafer Handling Robot Arms [J].Chinese Journal of Mechanical Engineering, 2014,36(4):30-33.
[2]Bandopadhya D, Bhogadi D K. Active Vibration Suppression of a Flexible Link Using Ionic Polymer Metal Composite Robotics[C]//Automation and Mechatronics IEEE Conference.Bengkok,2006:1-6.
[3]Sakawa Y.Modeling and Feedback Control of Lexible Arm[J].Journal of Robotics System, 1985, 2(4):453-472.
[4]Nguyen T D, Egeland O. Output Tracking Control of a Flexible Robot Arm[C]//Proceedings of the 44th IEEE Conference on Decision and Control, and the European Control Conference. Seville, 2005:5269-5274.
[5]Korayem M H, Nikoobin A, Azimirad V. Trajectory Optimization of Flexible Link Manipulatorsin Point-to-point Motion[J]. Robotica, 2009, 27(6):825-840.
[6]Korayem M H, Davarzani E, Bamdad M. Optimal Trajectory Planning with the Dynamic Load Carrying Capacity of a Flexible Cable-suspended Manipulator[J].Scientia Iranica Transaction B-Mechanical Engineering, 2010, 17(4):315-326.
[7]吴明月,蔡鹤皋. 基于最优S形曲线轨迹的硅片传输机器人末端振动抑制方法[J].机器人,2014,36(4):446-454.
Wu Mingyue,Cai Hegao. Method of Vibration Suppression of the End-effector of Wafer Handling Robot Based on Optimal S-curve Profile[J]. Robot, 2014,36(4):446-454.
[8]Kapucu S, Baysec S.Residual Vibration Suppression of a Flexible Joint System Using a Systematic Command Shaping Technique[J]. The Arabian Journal Scienceand Engineering, 2006, 31(2B):139-152.
[9]Ahmad M A,Ramli M S.Optimal Control with Input Shaping for Input Trackingand Vibration Suppression of a Flexible Joint Manipulator[J]. European Journal of Scientific Research, 2009, 28(4):583-599.
[10]张建军,李为民. 支链嵌套三自由度动平台可连续回转并联机器人结构: 中国,ZL200810052792.1[P].2008-04-18.
|