Study on Separating Displacement Models for Component from Waste Printed Circuit Board

Abstract

Abstract: Under conditions of melt solder, whether components might be disassembled was decided by the separating distance between components and the substrate (named as separating displacement) caused by removal force. Firstly, the models of separating displacement for surface mount devices (SMD) and through-hole devices (THD) were established under the conditions of vertical disassembly and horizontal disassembly. Secondly, based on the Laplace equation and the Newton’s equation for hydrostatic pressure, tensile breaking height of solder was analyzed and modeled in vertical disassembly for 3 typical kinds of components and the programmed algorithm was elaborated in detail. Finally, to verify the models for tensile breaking height of the melted solder, based on SMD with mounting base experiments were performed and the results show that the models for tensile breaking height are effective for melting solder. Models of separating displacements for components will be helpful to quantify the distance between components and the substrate, which is helpful for preparing the dismantling process of waste PCBs.

Key words: waste printed circuit board (PCB), disassembly, separating displacement, tensile breaking height

摘要： 在焊料加热熔化的前提下，电子元器件拆解取决于在拆解外力作用下元器件相对电路板基板产生的位移即元器件分离位移。首先建立水平拆解和垂直拆解两种方式下不同元器件的分离位移模型；然后重点针对3种典型类型元器件引脚下的焊料在垂直拆解时的断裂高度进行分析，基于牛顿静压力方程和拉普拉斯方程建立了焊料断裂高度的数学模型，并通过实验验证了模型的正确性。废旧电路板上元器件分离位移模型对于确定拆解工艺参数具有重要价值。

关键词: 废弃电路板, 拆解, 分离位移, 断裂高度

CLC Number:

TN606

Xiang Dong, Wu Yujia, Yang Jiping, Long Danfeng, Mou Peng. Study on Separating Displacement Models for Component from Waste Printed Circuit Board[J]. China Mechanical Engineering.

向东, 吴育家, 杨继平, 龙旦风, 牟鹏. 废旧电路板元器件分离位移模型研究[J]. 中国机械工程.

References

[1]Corp B. Solder Machine-simultaneously Solders the Leads on an Integrated Circuit Component: US，3684151-A[P]. 1972-08-15.

[2]Feldmann K, Scheller H. The Printed Circuit Board-A Challenge for Automated Disassembly and for the Design of Recyclable Interconnect Devices[C]//International Conference on the Clean Electronics Products and Technology (CONCEPT). New York:IET Digital Library, 1995:186-190.

[3]瓦拉依丁. 带元器件电路板拆卸工艺研究[D]. 北京: 清华大学, 2005.

[4]段广洪, 向东, 杨继平, 等. 废旧电子电器资源化关键技术研究[J]. 数字制造科学, 2008,6(1):3-39.

Duan Guanghong, Xiang Dong, Yang Jiping, et al. Research on the Key Technology of Recycling Wasted Electrical and Electronic Equipment[J]. Digital Manufacturing Science, 2008,6(1):3-39.

[5]Yang J, Xiang D, Wang J, et al. Removal Force Models for Component Disassembly from Waste Printed Circuit Board[J].Resources,Conservation & Recycling, 2009,53(8):448-454.

[6]Yang J, Wang J, Xiang D, et al. Research on Mechanical Models for Disassembling Components from Scrap Printed Circuit Board Assemblies[C]//Proceedings Global Conference on Sustainable Product Development and Life Cycle Engineering, Sustainability and Remanufacturing VI. Busan, Korea, 2008:83-88.

[7]Yokoyama S, Iji M. Recycling of Printed Wiring Boards with Mounted Electronic Parts[C]//Proceedings of the IEEE International Symposium on Electronics and the Environment. New York:IEEE,1997:109-114.

[8]Knoth R, Hoffmann M, Kopacek B, et al. Intelligent Disassembly of Electr(on)ic Equipment[C]//Proceedings of Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing, EcoDesign.New York:IEEE, 2001:557-561.

[9]Knoth R, Brandsttter M, Kopacek B, et al. Automated Disassembly of Electr(on)ic Equipment[C]//Proceedings of the IEEE International Symposium on Electronics and the Environment.New York:IEEE, 2002:290-294.

[10]Kopacek P, Kopacek B. Intelligent, Flexible Disassembly[J]. International Journal of Advanced Manufacturing Technology, 2006,30(5/6):554-560.

[11]Hoffmann M, Knoth R, Kopacek B, et al. How Can Experiences from Reuse Activities Influence the Development of DFE-tools[C]//Proceedings of the IEEE International Symposium on Electronics and the Environment.New York:IEEE, 2001:264-267.

[12]张杰. 废弃电路板的电子元件、焊料的分拆与回收方法及装置: 中国，CN1600458A[P]. 2005-03-30.

[13]Trodler J, Reuter H, Franke M. Removal Device for Circuit Board Surface-mounted Components: Germany,DE19525116-A1[P]. 1997-01-09.

[14]湧川朝宏. プリント基板からの電子部品および半田の分離装置および分離方法:日本，JP10200255-A[P]. 1998-7-31.

[15]横沢雄二, 吉田陽. プリント基板の解体方法および解体装置: 日本，JP2004022607 A[P]. 2004-01-22.

[16]那須敏幸, 竹内暢人, 香宗我部秀雄. 実装基板のリサイクル装置:日本，JP9-83129[P]. 1997-03-28.

[17]藤田惠之助. プリント基板廃材の処理方法及びその装置:日本，WO02/42016 A1[P]. 2002-05-30.

[18]Englert K. Process and Plant for the Automatic Removal of Components: EP, WO94/13124[P]. 1994-06-09.

[19]唐德文, 何志锋, 刘永霞, 等. 一种废旧电路板拆解机: 中国，CN104511453A[P]. 2015-04-15.

[20]许振明, 王建波. 带元器件电路板的拆解装置及其拆解方法: 中国，CN103990879A[P]. 2014-08-20.