Development of Strength Test Machine for Marine Emergency Towing Arrangements

Abstract

Abstract:

A test method of strength test for emergency towing arrangements was presented herein. In order to simplify the structure of test machine, the fairlead and towing pennant/chafing chain were rotated 30 degrees, so that the tensile plane was horizontal, and the strong point was tested separately, then the test procedure was presented. According to the test method, type test and factory test criteria, the work such as total design,steel-concrete composite body design, synchronous loading system design and towing pennant holding fixture design were completed. The strength test machine was developed, which consisted of the T type base platform and various holding fixtures. Using the test machine, strength test of a 2MN type aft emergency towing arrangements we carried out. The practices show that the test method is feasible, and the test machine has some features such as reasonable structure, good reliability and high precision, etc.

Key words: emergency towing arrangement, strength test, testing machine, towing pennant holding fixture

摘要：

设计了一种船舶应急拖带装置强度试验方法。为简化试验机结构，提出将被试导缆孔及拖缆/防擦链整体旋转30°以实现拉力平面与水平面的重合，并将强力点单独进行试验，给出了相应的试验流程。按照设计试验方法及应急拖带装置型式试验和出厂试验的要求，进行了试验机总体设计、结构件-混凝土复合式机身设计、双缸同步加载系统设计、拖缆（钢丝绳）夹持单元设计等工作，研制了由T形结构试验机基础平台及各种夹持单元组成的应急拖带装置强度试验机。利用研制的试验机进行了试验负荷为2MN的某型艉部应急拖带装置的强度试验，试验结果证明了提出的应急拖带装置强度试验方法可行，研制的试验机结构合理、可靠性好、试验精度高。

关键词: 应急拖带装置, 强度试验, 试验机, 拖缆夹持单元

CLC Number:

TH871

Su Shijie, You Youpeng, Tang Wenxian, Li Cunjun. Development of Strength Test Machine for Marine Emergency Towing Arrangements[J]. China Mechanical Engineering, 2016, 27(04): 454-460.

苏世杰, 游有鹏, 唐文献, 李存军. 船舶应急拖带装置强度试验机的研制[J]. 中国机械工程, 2016, 27(04): 454-460.

References

[1]Morton R. Perceiving Tomorrow′s Marine Shipping Spill Risk[C]// OCEANS 2010. Seattle: IEEE, 2010:1-9.

[2]Urbasński J, Morgas W, Kopacz Z. The Safety and Security Systems of Maritime Navigation[J]. Journal of Navigation, 2008, 61(3): 529-535.

[3]彭辉. 船舶应急拖带模式及优化探讨[J]. 中国航海,2011，34(4):85-88.

Peng Hui. Towing Mode in Marine Emergency and Its Optimization[J]. China Navigation, 2011，34(4): 85-88.

[4]Berg T E, Gudmundset G, Klevstad U, et al. Emergency Towing: Field Exercises and Simulator-based Training[C]// ASME 2008 27th International Conference on Offshore Mechanics and Arctic Engineering. Estoril: ASME, 2008:303-312.

[5]Internationale O M. SOLAS: Amendments 2003, 2004 and 2005[M]. London: International Maritime Organization, 2006.

[6]House D. Marine Emergencies: for Masters and Mates[M].London： Routledge,2014.

[7]吴安元. 油船应急拖带装置通过七国船级社型式试验[J]. 船舶物资与市场， 1998(3):45.

Wu Anyuan.Tanker Emergency Towing Device Type Testing by Seven Countries Classification Societies[J].Marine Material and Market,1998(3):45.

[8]钱观良，李志峰，叶树明. MLW-15000型锚链拉力试验机电液伺服控制系统[J]. 液压与气动,2003(1): 9-11.

Qian Guanliang, Li Zhifeng, Ye Shuming. Electro-hydraulic Servo Control System of MLW-15000 Horizontal Anchor Chain Tension Tester[J]. Hydraulic and Pneumatic,2003(1): 9-11.

[9]Ridge I M, Hobbs R E. Torque in Mooring Chain. Part 2: Experimental Investigation[J]. The Journal of Strain Analysis for Engineering Design, 2005, 40(7): 715-728.

[10]Ridge I. Tension–torsion Fatigue Behaviour of Wire Ropes in Offshore Moorings[J]. Ocean Engineering, 2009, 36(9): 650-660.

[11]朱本正. 3500 kN静载测试平台试验系统的研制[D].杭州：浙江大学, 2014.

[12]刘岳兵，王少华，何维，等. 120 MN桥梁支座试验机新型机架结构设计[J]. 铁道建筑, 2010(8): 21-23.

Liu Yuebing ,Wang Shaohua, He Wei, et al. 120 MN Bridge Bearing Test Machine Design Novel Frame Structure[J]. Railway Construction,2010(8): 21-23.

[13]李长春，孟亚东，刘晓东，等. 电液伺服系统的同步控制研究[J]. 兵工学报, 2007，28(6): 765-768.

Li Changchun ,Meng Yadong, Liu Xiaodong, et al. Motion Synchronization of Electro-hydraulic Servo System[J]. Ordnance Journal, 2007，28(6): 765-768.

[14]郭栋，付永领，卢宁，等. 自抗扰控制技术在电液力伺服系统中的应用[J]. 北京航空航天大学学报, 2013，39(1): 115-119.

Guo Dong,Fu Yongling, Lu Ning, et al. Application of ADRC Technology in Electro-hydraulic Force Servo System[J]. Journal of Beijing University of Aeronautics and Astronautics, 2013，39(1): 115-119.

[15]邓飙，苏文斌，郭秦阳，等. 双缸电液位置伺服同步控制系统的智能控制[J]. 西安交通大学学报, 2011, 45(11): 85-90.

Deng Biao, Su Wenbin, Guo Qinyang, et al. Intelligent Control for Electro-hydraulic Position Servo Synchronic Control System with Double Cylinders[J]. Journal of Xi'an Jiaotong University,2011, 45(11): 85-90.

[16]翟庆光，聂杰，康岳伟. 深海取样绞车牵引卷筒上钢缆张力分析[J]. 海洋技术, 2008，27(2): 28-30.

Zhai Qingguang, Nie Jie, Kang Yuewei. Analysis of Wire Line Tension on Traction Drum of Deep Sea Sampling Winch[J]. Marine Technology,2008，27(2):28-30.