Performance Analysis of Variable Clamping Force Actuator of EMCVT

Abstract

Abstract:

EMCVT was driven by direct current motor. It was more efficient, had less parts and better control performance than that driven by electric-hydraulic system. So far the clamping force of EMCVT could not be varied with input torque. A new type of actuator where the control clamping force was put forward. Mathematical model of clamping force control actuator was built and a dual closed loop controller with fuzzy logic control and PI control was designed. Simulation results show that control performance of clamping force actuator and control strategies are good and meet the requirements of clamping force while system running.

Key words: electric-mechanic continuously variable transmission(EMCVT), variable clamping force, control, simulation

摘要：

机电控制CVT采用直流电机作为调速驱动机构，比传统的电控液动CVT具有更高的效率、更好的控制性能和更少的零件数目。针对目前机电控制CVT夹紧力不可调的缺点，提出一种CVT夹紧力调整的机构，并建立了数学模型。在此基础上设计了基于模糊控制和比例积分控制的位置与速度双闭环控制算法，并进行了夹紧力调整控制仿真。结果表明，所提出的夹紧力调整机构和控制策略具有较好的控制性能，满足系统运行过程中夹紧力变化的需要。

关键词: 机电控制CVT, 可变夹紧力, 控制, 仿真

CLC Number:

U463.2

Ye Ming, Li Xin, Luo Yong. Performance Analysis of Variable Clamping Force Actuator of EMCVT[J]. China Mechanical Engineering, 2015, 26(3): 398-402,413.

叶明, 李鑫, 罗勇. 机电控制CVT夹紧力可变机构性能分析[J]. 中国机械工程, 2015, 26(3): 398-402,413.

References

[1]Takashi S, Hiroyuki Y, Yoshio M, et al. Introduction of the Latest Hydraulic Control System for Automatic Transmission[C]//Proceedings of the 7th JFPS International Symposium on Fluid Power.Toyama,2008:137-142.
[2]Patric A D, Laurent T, Steven B, et al. CVT-based Full Hybrid Powertrain Offering High Efficiency at Lower Cost[J]. SAE Paper, 2010-01-1313.
[3]Zhang Lei，Hao Guili, Yang Xiumin. The Electric Vehicle Power Design and the Matching Characteristics Analysis of the Transmission System[J]. Telkomnika, 2013, 11(11): 6352-6357.
[4]程乃士，郭大忠，郝建军,等. 机械加压、电子机械控制汽车无级变速器[P]. 中国专利：200620110951.5，2007-10-31.
[5]薛殿伦, 杨凯, 程金接. 金属带式无级变速器夹紧力的分析与研究[J]. 汽车工程, 2010,34(10): 923-927.
Xue Dianlun, Yang Kai，Cheng Jinjie. Analysis and Study on the Clamping Force of Metal V-belt CVT[J]. Automotive Engineering, 2010,34(10):923-927.
[6]van der Meulen S, de Jager B, Veldpaus F, et al. Improving Continuously Variable Transmission Efficiency with Extremum Seeking Control[J]. IEEE Transactions on Control Systems Technology, 2012,20(5):1376-1383.
[7]Rahman A, Sharif S B, Hossain A, et al.Kinematics and Nonlinear Control of an Electromagnetic Actuated CVT System for Passenger Vehicle[J]. Journal of Mechanical Science and Technology,2012, 26(7):2189-2196.
[8]van der Noll E, van der Sluis F, van Dongen T, et al. Innovative Self-optimising Clamping Force Strategy for the Pushbelt CVT[J]. SAE International Journal of Engines，2009,2(1):1489-1498.
[9]李光友,王建民，孙雨萍.控制电机[M]. 北京：机械工业出版社， 2009.
[10]程乃士. 汽车金属带式无级变速器:CVT原理和设计[M]. 北京：机械工业出版社，2008.
[11]邱梅开. 碟形弹簧弹性特性的分析[J]. 农业工程学报, 1994, 10(3):83-87.
Qiu Meikai. Elastic Characteristic of Disk Spring[J].Transactions of the Chinese Society of Agricultural Engineering,1994, 10(3):83-87.
[12]易先中, 张传友, 严泽生. 碟形弹簧的力学特性参数研究[J]. 长江大学学报(自然科学版),2007,4(4): 99-101,140.
Yi Xianzhong, Zhang Chuanyou, Yan Zesheng. Research onMechanical Properties of Disk Spring[J]. Journal of Yangtze University (Natural Science Edition) Sci. ＆ Eng., 2007, 4(4)：99-101,140.
[13]Carbone G, Mangialard L, Bonsenb B, et al. CVT Dynamics: Theory and Experiments[J]. Mechanism and Machine Theory, 2007,42(4):409.
[14]叶明，程越. 电驱动无级自动变速传动动态控制研究[J]. 机械传动, 2011，35(2): 9-12.
Ye Ming, Cheng Yue.Study on Dynamic Control of Continuously Variable Transmission Driven by DC Motor[J]. Journal of Mechanical Transmission, 2011，35(2): 9-12.
[15]张传伟,郭卫.直流电机双闭环调速系统仿真研究[J]. 机床与液压, 2005(2): 128-129.
Zhang Chuanwei, Guo Wei. Simulation Research on the Speed Governing System of DC Motor[J]. Machine Tool & Hydraulics,2005(2): 128-129.