[1]赵万华,张俊,刘辉,等.数控机床精度评价新方法[J].中国工程科学,2013,15(1):93-98.
Zhao Wanhua,Zhang Jun,Liu Hui.New Evaluation Method on the Precision of NC Machine Tools[J].Engineering Sciences,2013,15(1):93-98.
[2]Burton R A,Staph H E.Thermally Activated Seizure of Angular Contact Bearings[J].ASLE Transactions,1967,10(4):408-417.
[3]Jedrzejewski J,Kowal Z,Kwany W,et al.Hybrid Model of High Speed Machining Centre Headstock[J].CIRP Annals-Manufacturing Technology,2004,53(1):285-288.
[4]Holkup T,Cao H,KolárP,et al. Thermo-mechanical Model of Spindles[J].CIRP Annals-manufacturing Technology,2010,59(1): 365-368.
[5]Kim S M,Lee K J,Lee S K.Effect of Bearing Support Structure on the High-speed Spindle Bearing Compliance[J].International Journal of Machine Tools and Manufacture,2002,42(3):365-373.
[6]Kim K,Kim S S.Effect of Preload on Running Accuracy of Spindle[J]. International Journal of Machine Tools and Manufacture, 1989, 29(1):99-105.
[7]Jiang S,Mao H.Investigation of Variable Optimum Preload for a Machine Tool Spindle[J].International Journal of Machine Tools and Manufacture,2010,50(1):19-28.
[8]Chen J S,Chen K W.Bearing Load Analysis and Control of a Motorized High Speed Spindle[J].International Journal of Machine Tools and Manufacture,2005,45(12):1487-1493.
[9]蒋兴奇,马家驹,顾小兵.主轴轴承最小预紧载荷的计算[J].轴承,2001(3):1-3.
Jiang Xingqi,Ma Jiaju,Gu Xiaobing.Calculation of Miniumum Preload for Spindle Bearings[J].Bearing,2001(3):1-3.
[10]申阳,张晓鹏,何峰涛.精密机床主轴轴承早期失效分析[J].轴承,2012(5):38-40.
Shen Yang,Zhang Xiaopeng,He Fengtao.Early Failure Analysis of Spindle Bearing in Precision Machine Tools[J].Bearing,2012(5):38-40.
[11]余常武.YK系列数控成型磨齿机主轴及几何精度保持性研究[D].西安:西安交通大学,2013.
[12]Li Chunmei, Cui Fengkui. Research on VSR Process for Large Machine Tool Body[J].Applied Mechanics and Materials, 2011, 44(1): 349-354.
[13]Li C M,Cui F K.Research on Vibration Stress Relief Based on FEM[J].Applied Mechanics and Materials,2010,42:35-38.
[14]He W,Ren Y,Chen C,et al.Analysis on Technology of High-frequency Vibratory Stress Relief[C]//American Society of Mechanical Engineers.Power Division.Conference Sponsors.Chicago,2005:119-122.
[15]胡敏,余常武,张俊,等.数控机床基础大件精度保持性研究[J].西安交通大学学报,2014,48(6):65-73.
Hu Min,Yu Changwu, Zhang Jun,et al.Accuracy Stability for Large Machine Tool Body[J].Journal of Xi’an Jiaotong University,2014,48(6):65-73.
[16]张文凯.卧式加工中心几何精度分析[D]. 西安:西安交通大学,2011.
[17]张景和,张顺国,赵海潇,等.大型超精密机床导轨卸荷系统结构设计与测试[J].光学精密工程,2007,15(9):1382-1390.
Zhang Jinghe,Zhang Shunguo,Zhao Haixiao.Structure Design and Test for Guide Unloading System of Large Ultra-precision Machine[J]. Optics and Precision Engineering,2007,15(9):1382-1390.
[18]张伯鹏,张年松.机床横梁重力变位的自演进补偿[J].清华大学学报 (自然科学版),2006,46(2):191-193.
Zhang Bopeng,Zhang Niansong.Self-evolutionary Compensation of Machine Tool Crossbeam Deformation Induced by Gravity[J]. Journal of Tsinghua University(Science and Technology),2006,46(2):191-193.
[19]胡万良,杨奇俊,张云华.机床计量垫铁的研究[J].制造技术与机床,2013(4):35-38.
Hu Wanliang,Yang Qijun, Zhang Yunhua.Research on the Measuring Pad Iron[J].Manufacturing Technology & Machine Tool,2013(4):35-38.
[20]郭铁能,王志亮,蔡力钢,等.超跨距横梁Z向导轨面起拱曲线设计与优化[J].北京工业大学学报,2014,40(5):653-660.
Guo Tieneng,Wang Zhiliang,Cai Ligang,et al.Design and Optimization of the Z-guided Face Camber Curve of Super-span Cross-rail[J].Journal of Beijing University of Technology,2014,40(5):653-660.
[21]郭铁能,席方剑,蔡力钢,等.重载大跨距横梁承载曲线分析与实验研究[J].
北京工业大学学报,2011,37(8):1129-1135.
Guo Tieneng,Xi Fangjian,Cai Ligang,et al. Load Curve Analysis and Experimental Study of Long Span and Heavy Load Crossbeam[J]. Journal of Beijing University of Technology,2011,37(8):1129-1135.
[22]Oehlert A,Atrens A.Room Temperature Creep of High Strength Steels[J].Acta Metallurgica et Materialia,1994,42(5):1493-1508.
[23]Neeraj T,Hou D H,Daehn G S,et al.Phenomenological and Microstructural Analysis of Room Temperature Creep in Titanium Alloys[J]. Acta Materialia,2000,48(6):1225-1238.
[24]单琳豪.特定环境下螺旋桨尾轴蠕变特性研究[D].大连:大连理工大学,2006.
[25]Ren Y,Beards C F.Identification of ‘Effective’ Linear Joints Using Coupling and Joint Identification Techniques[J].Journal of Vibration and Acoustics,1998,120(2):331-338.
[26]Celic D,Boltezar M. Identification of the Dynamic Properties of Joints Using Frequency-response Functions[J].Journal of Sound and Vibration,2008,317(1):158-174.
[27]胡峰,吴波,石铁林.基于初参数法的丝杠径向支撑刚度辨识方法[J].农业机械学报,2012,43(7):217-222.
Hu Feng,Wu Bo,Shi Tielin.Radial Rigidity Identification of Support Point for Ball Screw Based on the Principle of Initial Parameter[J].Transactions of the Chinese Society for Agricultural Machinery,2012,43(7):217-222.
[28]胡峰.数控机床进给系统动态特性辨识与状态监测方法研究[D].武汉:华中科技大学,2009.
[29]邰晓辉.XK717数控铣床进给传动系统的动力学优化[D].杭州:浙江工业大学,2006.
[30]陈光胜,李郝林,林献坤,等.数控机床进给系统机械刚度的闭环参数辨识[J].中国机械工程,2013,24(14):1868-1872.
Chen Guangsheng,Li Haolin,Lin Xiankun,et al.Mechanical Stiffness Identification for Feed System of CNC Machine Tools under Closed-loop Conditions[J].China Mechanical Engineering,2013,24(14):1868-1872.
[31]曹锟.高速伺服进给系统的运动控制精度研究[D]. 西安: 西安交通大学,2012.
[32]Joksimovic G M,Penman J.The Detection of Inter-turn Short Circuits in the Stator Windings of Operating Motors[J].Industrial Electronics,IEEE Transactions on Industrial Electronics,2000,47(5):1078-1084.
[33]Tallam R M,Habetler T G,Harley R G.Transient Model for Induction Machines with Stator Winding Turn Faults[J].IEEE Transactions on Industry Applications,2002,38:632-637.
[34]Nicolas L,Thierry B,Babak N M,et al.Real-time Detection of Interturn Faults in PM Drives Using Back-EMF Estimation and Residual Analysis[J].IEEE Transactions on Industry Applications,2011,37:2402-2412.
[35]蒋锐权,吴祖育,蔡建国.数控机床神经元自适应位置控制算法[J].上海交通大学学报,2001,35(7):1088-1092.
Jiang Ruiquan,Wu Zuyu,Cai Jianguo.Neuron Based Adaptive Control Algorithm for CNC Positioning Servo System[J].Journal of Shanghai Jiaotong University,2001,35(7):1088-1092.
[36]Irisa T,Takata S,Ueda R,et al.A Novel Approach on a Parameter Self-tuning Method in an AC Servo System[J].Automatica,1986,22(3):287-294.
[37]Kuo L Y, Yen J Y. Servo Parameter Tuning for a 5-axis Machine Center Based upon GA Rules[J].International Journal of Machine Tools and Manufacture,2001,41(11):1535-1550.
[38]陈鹏展.交流伺服系统控制参数自整定策略研究[D].武汉:华中科技大学,2010.
[39]李学伟. 数控机床高速加工轮廓误差成因、预测及轨迹补偿方法研究[D]. 西安: 西安交通大学,2013.
[40]朱晓春.切削过载的在线监控[J]. 制造技术与机床,2002(6):6-7.
Zhu Xiaochun.On-line Monitor and Control of Machining Overload[J].Manufacturing Technology & Machine Tool,2002(6):6-7.
[41]张根保, 彭露, 柳剑, 等. 基于清洁度熵的液压系统故障源排序方法[J]. 中国机械工程,2014,25(10):1362-1368.
Zhang Genbao, Peng Lu, Liu Jian,et al. Hydraulic System Failure Source Sequencing Method Based on Cleanliness Entropy[J].China Mechanical Engineering,2014,25(10):1362-1368.
[42]李平,黄泽森.基于机床做功量的监控系统开发[J].机床与液压,2013,41(2):113-117.
Li Ping, Huang Zesen.Development of Monitoring System Based on the Work Load of Machine Tool[J].Machine Tool & Hydraulics, 2013, 41(2):113-117.
[43]陈宇.面向可靠性的数控机床维修决策与评价[D].重庆:重庆大学,2014. |