[1]杨立平,马修真,靖海国,等.点燃式天然气发动机燃烧室结构优化的仿真与试验研究[J].中国机械工程,2013,24(21):2841-2845.
Yang Liping, Ma Xiuzhen, Jing Haiguo, et al.Simulation and Experimental Study on Optimization of Combustion Chamber Structure in Natural Gas Engine[J]. China Mechanical Engineering, 2013, 24(21): 2841-2845.
[2]Soberanis E, Fernandez A M. A Review on the Technical Adaptations for Internal Combustion Engines to Operate with Gas/Hydrogen Mixtures[J]. International Journal of Hydrogen Energy, 2010,35(21):12134-12140.
[3]葛文庆,刘梁,常思勤,等.一类大功率气体燃料发动机电控喷射装置的设计[J].中国机械工程,2012,23(22):2770-2771.
Ge Wenqing, Liu Liang, Chang Siqin, et al. Design of an Electronically Controlled Injection Device for Heavy-duty Gas Engine[J]. China Mechanical Engineering,2012,23(22):2770-2771.
[4]常思勤,刘梁.高功率密度的动圈式永磁直线电机:中国,CN101127474B[P].2010-07-14.
[5]常思勤,刘梁,李子非,等.一种发动机电磁驱动配气机构应用研究[J].南京理工大学学报,2011,35(5):587-588.
Chang Siqin, Liu Liang, LI Zifei, et al. Application of Engine Electromagnetic Actuated Valvetrain[J]. Journal of Nanjing University of Science and Technology, 2011,35(5):587-588.
[6]Ra Y, Kong S C, Reitz R D, et al.Multidimensional Modeling of Transient Gas Jet Injection Using Coarse Computational Grids[J]. SAE Technical Paper, 2005-01-0208.
[7]Andreassi L, Facci A L, Krastev V K, et al.Multidimensional Modelling of Gaseous Injection: Analysis of an Impinging Jet[J]. International Journal of Heat and Fluid Flow,2010,31(5):911-915.
[8]Yadollahi B, Boroomand M.The Effect of Piston Head Geometry on Natural Gas Direct Injection and Mixture Formation in a SI Engine with Centrally Mounted Single-Hole Injector[J]. SAE Technical Paper, 2011-01-2448.
[9]Birch A D, Brown D, Dodson M, et al. The Structure and Concentration Decay of High Pressure Jets of Natural Gas[J]. Combustion Science and Technology,2007,36:249-261.
[10]Ewan B C R, Moodie K. Structure and Velocity Measurements in Underexpanded Jets[J]. Combustion Science and Technology, 1986, 45:275-288.
[11]Li Y, Kirkpatrick A, Mitchell C, et al. Characteristic and Computational Fluid Dynamics Modeling of High Pressure Gas Jet Injection[J]. Journal of Engineering for Gas Turbines and Power ASME, 2004,126(1):192-197.
[12]Baratta M, Catania A E, Spessa E, et al. Multi-dimensional Modeling of Direct Natural-gas Injection and Mixture Formation in a Stratified-charge SI Engine with Centrally Mounted Injector[J]. SAE Technical Paper,2008-01-0975.
[13]Kim G H, Kirkpatrick A, Mitchell C. Computational Modeling of Natural Gas Injection in Large Bore Engines[J] Journal of Engineering for Gas Turbines and Power,2004,126(3):656-664.
[14]赵承庆,姜毅.气体射流动力学[M].北京:北京理工大学出版社,1998. |