Modeling, Simulation and Experiment of a Pneumatic Line-thrower

China Mechanical Engineering ›› 2015, Vol. 26 ›› Issue (11): 1434-1437.

Previous Articles Next Articles

Modeling, Simulation and Experiment of a Pneumatic Line-thrower

Wang Zhiwen;Xiong Wei;Wang Haitao;Wang Zuwen

Dalian Maritime University,Dalian,116026

Online:2015-06-10 Published:2015-06-05
Supported by:
The National Key Technology R&D Program（No. 2014BAK05B06）;Fundamental Research Funds for the Central Universities( No. 3132014303 )

气动抛绳器建模仿真与试验研究

王志文;熊伟;王海涛;王祖温

大连海事大学，大连，116026

基金资助:
国家科技支撑计划资助项目（2014BAK05B06）；中央高校基本科研业务费专项资金资助项目(3132014303)；交通运输部建设科技重点项目（2013328225080）

Abstract

Abstract:

The structure and the working principles of a line-thrower were introduced,which was controlled by pneumatic valve herein. A model of the line-thrower was developed in AMESim software. The dynamic behaviors of main components were obtained by simulation. The results of the simulation and the experiments are consistent with each other and testify the reliability of the model, thus providing reference for further optimization of a line-thrower.

Key words: pneumatic line-thrower;modeling and simulation, dynamic response, marine rescue

摘要：

简要介绍了气动控制击发型气动抛绳器的结构与工作原理，应用AMESim建模仿真软件对气动抛绳器系统进行了建模仿真，得到了气动抛绳器主要组件的动态响应特性。将弹体抛射初速度的仿真值与抛射试验测量值进行对比分析，结果基本一致，验证了模型的可靠性。研究结果为气动抛绳器的进一步优化设计提供了参考。

关键词: 气动抛绳器, 建模仿真, 动态响应, 海上救助

CLC Number:

TH138

Wang Zhiwen, Xiong Wei, Wang Haitao, Wang Zuwen. Modeling, Simulation and Experiment of a Pneumatic Line-thrower[J]. China Mechanical Engineering, 2015, 26(11): 1434-1437.

王志文, 熊伟, 王海涛, 王祖温. 气动抛绳器建模仿真与试验研究[J]. 中国机械工程, 2015, 26(11): 1434-1437.

[1]	ZHU Jiangfeng, CAO Yuguang, ZHAO Qiankun, LI Lei. Study on Hydrodynamic Stability of a Dot Matrix Offshore Wind Turbine Foundation Structure [J]. China Mechanical Engineering, 2023, 34(20): 2428-2433，2474.
[2]	LYU Jingcheng, WEI Yintao, WU Mingyu, HE Junxiang, LIANG Guanqun, YIN Hang. Hysteresis and Dynamic Response of Magnetorheological Measuring Systems [J]. China Mechanical Engineering, 2022, 33(17): 2017-2023.
[3]	LING Qihui, DAI Juchuan, CHEN Shengzhao, SUN Feiying, WANG Guosheng, LIAO Lili. Road Roughness Recognition Based on Vehicle Body Dynamic Response of Tracked Vehicles [J]. China Mechanical Engineering, 2022, 33(01): 62-69.
[4]	LIU Yuhang;LI Chun;ZHOU Hongjie;HAN Zhiwei. Analysis of Dynamic Responses of Collisions between Three Types of Offshore Wind Turbine Foundations and Ship [J]. China Mechanical Engineering, 2019, 30(14): 1653-1657.
[5]	HAN Zhiwei；ZHOU Hongjie；LI Chun；DING Qinwei；HAO Wenxing；YU Wan. Dynamic Response and Anti Collision Devices of an Offshore Wind Turbine Subjected to Ship Impacts [J]. China Mechanical Engineering, 2019, 30(12): 1387-1394.
[6]	HUANG Zhiqian;DING Qinwei;LI Chun;TANG Jinhua. Optimal Control of MTMD in Floating Wind Turbine Stability Based on MIGA [J]. China Mechanical Engineering, 2018, 29(11): 1349-1356.
[7]	WANG Jie;ZHANG Jianzhuo;LIU Lingwei;. Simulation and Experimental Study of High Pressure and Large Flow Quick Opening Valves [J]. China Mechanical Engineering, 2018, 29(08): 916-922.
[8]	XIE Miao, LIU Zhixiang, MAO Jun. Analysis of Influences of Contact Stiffness Variations on Advanced Support Dynamic Response in Moving Processes [J]. China Mechanical Engineering, 2017, 28(12): 1406-1412.
[9]	ZHANG Xi, GUO Jiali, ZHANG Xinbin, WANG Yue. Optimization Design of Electromagnetic-driving Schemes of a Cold Gas Micro-thruster [J]. China Mechanical Engineering, 2017, 28(09): 1034-1038.
[10]	Yang Changhui, Xu Taojin, Wu Canyuan. Analyses of Dynamic Coupling Characteristics and Structural Noise of Multi-Megawatt Wind Turbine Gearbox [J]. China Mechanical Engineering, 2016, 27(05): 609-614,621.
[11]	Chen Qiang, Zhang Zhendong, Guo Hui, Zhu Xi. Magnetic Circuit Structure Optimization Design for Electronic Gasoline Injector Based on MOSA Algorithm [J]. China Mechanical Engineering, 2014, 25(18): 2501-2505.
[12]	Lu Jinhe, Zhang Zhendong, Cheng Qiang, Yin Congbo. A New Magnetic Circuit Structure for an Electronic Fuel Injector [J]. China Mechanical Engineering, 2014, 25(17): 2305-2309.
[13]	Cheng Qiang, Zhang Zhendong, Xie Nailiu, Guo Hui. Research on Comprehensive Characteristics of an Electronic Gasoline Injector Based on MIM Technology [J]. China Mechanical Engineering, 2014, 25(10): 1415-1419.
[14]	CHEN Mo-Hua, WANG Chao-Qi, XIE Guo-Dong, CHEN Zhen-Hua. Dynamic Simulation Analysis of Model Support System in FL[STBZ]-[STHZ][WTHZ]26 Wind Tunnel [J]. China Mechanical Engineering, 2012, 23(2): 161-166.
[15]	HEI Dai, ZHENG Mei-Ru. Dynamics Analysis of Flexible Rotor System Based on Wilson-θ Method [J]. China Mechanical Engineering, 2011, 22(24): 2918-2922,2965.

Modeling, Simulation and Experiment of a Pneumatic Line-thrower

气动抛绳器建模仿真与试验研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics