[1] |
WANG Zhiqiang, LEI Zhenyu.
Analysis of Causes for Rail Corrugation on Steel Spring Floating Slab Tracks of Metro Small Radius Curves
[J]. China Mechanical Engineering, 2023, 34(24): 2899-2908.
|
[2] |
HE HonglinZ, HAO Weipeng, YU Zhihao, LONG Yufan, YAN Yinqi, LI Ji.
Topological Dynamics Optimization of Constrained Damping Plates Based on Bilinear Material Interpolation Model
[J]. China Mechanical Engineering, 2022, 33(23): 2783-2789,2878.
|
[3] |
ZHANG Hongquan, XIAO Wangqiang.
Anti-vibration Design for Compressor Pipelines of Inverter Air Conditioners Based on Particle Damping
[J]. China Mechanical Engineering, 2022, 33(18): 2172-2182,2189.
|
[4] |
WANG Longkai, WANG Ailun, YIN Yijun, JIN Miao, HENG Xing.
Dynamics Modeling Method of Complex Rotors for Aero-turboshaft Engines
[J]. China Mechanical Engineering, 2022, 33(13): 1513-1520.
|
[5] |
SHAN Zenghai, LI Zhiyuan, ZHANG Xu, HUANG Yixiang, LI Yanming, LIU Chengliang, ZHANG Xuan.
Health Status Assessment of Hydraulic Pumps Based on Multi-sensor Information Fusion and Multi-grained Cascade Forest Model
[J]. China Mechanical Engineering, 2021, 32(19): 2374-2382.
|
[6] |
MENG Zong, GAO Wenqing, PAN Zuozhou, ZHANG Guangya, FAN Fengjie.
G-KSVD Dictionary and Its Applications in Sparse Representation of Rolling Bearing Fault Signals#br#
[J]. China Mechanical Engineering, 2021, 32(15): 1776-1785.
|
[7] |
WANG Dongxiong, WANG Nianxian, CHEN Kuisheng.
Fixed-point Rubbing Characteristics of Magnetic Suspended Dual-rotor Systems
[J]. China Mechanical Engineering, 2021, 32(14): 1686-1699.
|
[8] |
SUN Jing, HAN Xueyan, WEI Yuanhao, CHEN Shuang, LI Shihua, .
Nonlinear Modal Analysis of Parallel Pointing Mechanisms Considering Time-varying Clearances
[J]. China Mechanical Engineering, 2021, 32(14): 1700-1708,1715.
|
[9] |
WANG Longkai, WANG Ailun, JIN Miao, YIN Yijun, .
Bistable Vibration Characteristics of Rod Fastening Rotor with Internal Damping
[J]. China Mechanical Engineering, 2021, 32(05): 512-522,564.
|
[10] |
MENG Zong;LIU Zihan;LYU Meng.
Fault Diagnosis for Rolling Bearings Based on Improved Singular Value Decomposition and Spectral Kurtosis
[J]. China Mechanical Engineering, 2020, 31(20): 2420-2428.
|
[11] |
YI Yali1;XIANG Jian1;LIU Da1;ZHEN Hongwei2;JIN Herong1.
Dynamic Performance of Mould Table Vibration Systems Considering the Influencing Factors of Joint Surface
[J]. China Mechanical Engineering, 2019, 30(20): 2403-2411.
|
[12] |
CHENG Min1,2; LIU Baoguo1;LIU Yanxu1.
Mass Metric Method and Its Correction of Grinding Medium Filling Rates for Vibrating Mill
[J]. China Mechanical Engineering, 2019, 30(18): 2164-2171.
|
[13] |
WANG Zhiyong;DU Weitao.
Dynamics Analysis of Spindle-bearing Systems on Spiral Bevel Gear Cutting Machines
[J]. China Mechanical Engineering, 2019, 30(18): 2211-2216,2223.
|
[14] |
YAO Yuhui1;DING Liang2;WANG Xiaojian1;LI Zhishen1;LI Hongguang1.
Analysis of Vibration Suppression Effectiveness on Frames of Water-cooled Chillers
[J]. China Mechanical Engineering, 2019, 30(16): 1891-1895.
|
[15] |
WANG Ailun 1,2;DENG Guilong 1,2;LIU Qiang1,2;LI Shijie1,2.
Research on Mechanism of Combined Rotor's Fatigue-Creep Joint Damages
[J]. China Mechanical Engineering, 2019, 30(10): 1156-1162.
|