[1]韩豫,陈学东,刘全坤,等.基于应变强化技术的奥氏体不锈钢压力容器轻型化设计探讨[J].压力容器,2010,27(9):16-20,37.
Han Yu,Chen Xuedong,Liu Quankun,et al.Study on Light-duty Design of Austenitic Stainless Steel Pressure Vessels Based on Stain Strengthening Technology[J].Pressure Vessel Technology,2010,27(9):16-20,37.
[2]British Standards Institution. BS EN13458-2:2002 Cryogenic Vessels-Static Vacuum Insulated Vessels-Part 2: Design, Fabrication, Inspection and Testing[S]. London: The Standards Policy and Strategy Committee, 2002.
[3]Standards Australia. AS 1210-2010 Pressure Vessels[S]. Sydney: Standards Australia International Ltd., 2010.
[4]韩豫,陈学东,刘全坤,等.奥氏体不锈钢应变强化工艺及性能研究[J].机械工程学报,2012,48(2):87-92.
Han Yu, Chen Xuedong, Liu Quankun, et al. Study on Technique and Properties of Cold Stretching for Austenitic Stainless Steels[J]. Journal of Mechanical Engineering, 2012, 48(2):87-92.
[5]郑津洋,李雅娴,徐平,等.应变强化用奥氏体不锈钢力学性能影响因素[J].解放军理工大学学报(自然科学版),2011,12(5):512-519.
Zheng Jinyang, Li Yaxian, Xu Ping, et al. Influence Factors of Mechanical Property for Strain Strengthening Austenitic Stainless Steel[J]. Journal of PLA University of Science and Technology(Natural Science Edition), 2011,12(5):512-519.
[6]韩豫,陈学东,姜恒.应变强化奥氏体不锈钢焊接接头断裂韧性试验研究[C]//第八届全国压力容器学术会议——压力容器先进技术.北京,2013:267-271.
[7]闫永超,陈学东,杨铁成,等.应变强化022Cr17Ni12Mo2奥氏体不锈钢室温低周疲劳性能研究[J].压力容器,2011,28(12):5-10.
Yan Yongchao, Chen Xuedong, Yang Tiecheng, et al. Study on Room Temperature Low-cycle Fatigue of Strain-strengthening Austenitic Stainless Steels 022Cr17Ni12Mo2[J]. Pressure Vessel Technology, 2011, 28(12):5-10.
[8]韩豫,王可胜,刘全坤.应变强化对奥氏体不锈钢高温疲劳行为的影响[J].机械工程学报,2013,49(12):32-37.
Han Yu, Wang Kesheng, Liu Quankun. Effect of Cold Stretching on Fatigue Behavior of Austenitic Stainless Steel at Elevated Temperature[J]. Journal of Mechanical Engineering, 2013,49(12): 32-37.
[9]中华人民共和国国家质量监督检验检疫总局.TSG R0004-2009固定式压力容器安全技术监察规程[S].北京:新华出版社, 2009.
[10]中华人民共和国国家质量监督检验检疫总局.中国国家标准化管理委员会.GB150.1~GB150.4-2011压力容器[S].北京:中国标准出版社,2011.
[11]郑津洋,赵永志,刘鹏飞,等.压力容器面临的机遇和发展趋势[C]//第八届全国压力容器学术会议——压力容器先进技术.北京:化学工业出版社,2013,30-36.
[12]国家发展和改革委员会.JB/T 47302—2005承压设备无损检测 第2部分:射线检测[S].北京:新华出版社,2005.
[13]国家发展和改革委员会.JB/T 4730.5—2005承压设备无损检测 第5部分:渗透检测[S].北京:新华出版社,2005.
[14]Back J H,Kim Y P,Kim W S,et al. Effect of Temperature on the Charpy Impact and CTOD Values of Type 304 Stainless Steel Pipeline for LNG Transmission[J]. Journal of Mechanical Science and Technology, 2002, 16(8):1064-1071.
[15]Avery R E, Parsons D. Welding Stainless and 9% Nickel Steel Cryogenic Vessels[J]. Welding Journal, 1995, 74(11): 45-50. |