Review and Development Trends of Deep-sea Mineral Resource Core Sampling Technology and Equipment

Abstract

Abstract:

Seafloor rock drill is the necessary equipment for marine geologic and environmental investigation. The present situations of deep-sea mineral resource core sampling technology and equipment were summarized, and the performance, structure and technology characteristics of several kinds of typical seafloor rock drill were focused on. The supporting and leveling mechanism technology, core sampling technology, drill string making and breaking and drill rods storage magazines technology, hydraulic system and pressure compensation technology, high voltage power supply and high-speed data communication technology by armored power & communication cable and launch and recovery technology of key technological problems of seafloor rock drill were analyzed. Based on analyses of the development of seafloor rock drill, it will develop into large-size, multiuse, intellectualization, professionalization, facilitation and truth-preserving sampling.

Key words: deep-sea, mineral resource, seafloor drill, core sampling

摘要：

海底岩芯取样钻机是开展海洋地质及环境科学研究、进行海洋矿产资源勘探和海底工程地质勘察所必备的关键技术装备。首先对世界深海岩芯探测取样技术与装备的发展历程进行了梳理，重点介绍了目前世界上几种典型的海底岩芯取样钻机性能、结构和技术特点；然后，分别对海底岩芯取样钻机中的稳定支撑及调平技术、取芯技术、钻杆钻具接卸存储技术、液压系统与压力平衡技术、光纤动力复合电缆供电与通讯技术、下放与回收技术等关键技术进行了分析；最后，分析和预测了深海矿产资源岩芯探测取样技术与装备的发展趋势——将朝着大型化、多用途化、智能化、专业化和便利化以及高保真取样方向发展。

关键词: 深海, 矿产资源, 海底钻机, 岩芯探测取样

CLC Number:

P742

Liu Deshun, Jin Yongping, Wan Buyan, Peng Youduo, Huang Xiaojun. Review and Development Trends of Deep-sea Mineral Resource Core Sampling Technology and Equipment[J]. China Mechanical Engineering, 2014, 25(23): 3255-3265.

刘德顺, 金永平, 万步炎, 彭佑多, 黄筱军. 深海矿产资源岩芯探测取样技术与装备发展历程与趋势[J]. 中国机械工程, 2014, 25(23): 3255-3265.

References

[1]Amann H. Technological Trends in Ocean Mining[J]. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1982, 307(1499): 377-403.
[2]Rahul S. Deep Sea Mining Economic, Technical, Technological, and Environmental Considerations for Sustainable Development[J]. Marine Technology Society Journal, 2011, 5(5): 28-41.
[3]Jin S C. Deep Ocean Mining Technology III Developments[C]//Proceedings of the Eighth International Society of Offshore and Polar Engineers Ocean Mining Symposium.Chennai, India, 2009: 1-7.
[4]鄢泰宁, 补家武, 李邵军. 浅析国外海底取样技术的现状及发展趋势[J]. 地质科技情报, 2000, 19(2): 67-70.
Yan Taining, Bu Jiawu, Li Shaojun. Brief Study on the International Present Condition and Developing Tendency of the Technology of Sea Floor Sample Drilling[J]. Geological Science and Technology Information, 2000, 19(2): 67-70.
[5]曾宪军, 伍忠良, 郝小柱. 海洋地质调查方法与设备综述[J]. 气象水文海洋仪器, 2009 (1): 111-120.
Zeng Xianjun, Wu Zhongliang, Hao Xiaozhu. Summary of Marine Geological Survey Mehods and Equipments[J]. Meteorological, Hydrological and Marine Instruments, 2009 (1): 111-120.
[6]倪国江. 海洋资源开发技术发展趋势及我国的发展重点[J]. 海洋技术, 2009, 28(1): 133-136.
Ni Guojiang. Development in Marine Resources Development Technology and China’s Strategic Focus[J]. Ocean Technology, 2009, 28(1): 133-136.
[7]Freudenthal T, Marum G W. Shallow Drillingin the Deep Sea: a New Technological Perspective for the Next Phase of Scientific Ocean Drilling[C]//Proceedings of the New Ventures in Exploring Scientific Targets Conference.Bremen, Germany, 2009: 1-6.
[8]万步炎, 黄筱军. 深海浅地层岩芯取样钻机的研制[J]. 矿业研究与开发, 2006(增刊1): 49-51.
Wan Buyan, Huang Xiaojun. Development of Core Sampling Drill for Deep Seabed Shallow Strata[J]. Mining Research and Development, 2006(S1): 49-51.
[9]Wan Buyan, Zhang Guang, Huang Xiaojun. Research and Development of Seafloor Shallow-hole Multi-coring Drill[C]//Proceedings of the Twentieth International Offshore and Polar Engineering Conference.Beijing,2010: 588-591.
[10]Spencer A, Faulds D. Rockdrill-the Development and Application of a New ROV Operated Seabed Drilling and Coring System[C]//Proceedings of the 9th Unmanned Underwater Vehicle Showcase Conference.London, UK, 2007: 533-540.
[11]Sven P, Peter M H, Thomas K. Shallow Drilling of Seafloor Hydrothermal Systems Using the BGS Rockdrill[J]. Marine Georesources and Geotechnology, 2005(23): 175-193.
[12]Kelleher P, Samsuri N. Footings Design for Temporarily Founded Seabed Drilling Systems[C]//Proceedings of the Offshore Technology Conference. Houston, Texas, U.S.A, 2008: 3109-3120.
[13]Freudenthal T, Wefer G. Scientific Drilling with the Sea Floor Drill Rig MeBo[J]. Scientific Drilling,2007(5): 63-66.
[14]Spencer A. Rovdrill and the Rovdrill “M” Series, Pushing the Limits of the Offshore Geotechnical Investigation[C]//Proceeding of the Riocentro Oil & Gas Expo and Conference.Rio de Janeiro, Brazil, 2008: 371-377.
[15]Kirkwood W J. Steele D E. Active Variable Buoyancy Control System for MBARI’S ROV[J]. Proceeding of the OCEANS’94, Oceans Engineering for Today’s Technology and Tomorrow’s Preservation,1994(2): 471-476.
[16]Newan J B, Stakes D. Tiburon: Development of an ROV for Ocean Science Research[J].Proceeding of the OCEANS’94, Oceans Engineering for Today’s Technology and Tomorrow’s Preservation, 1994(2): 483-488.
[17]黄中华, 刘少军. 高压海水液压系统密封技术研究[J]. 中国机械工程, 2006, 17(增刊1): 43-45.
Huang Zhonghua, Lin Shaojun. Research on Sealing Technique of High Pressure Seawater Hydraulic System[J]. China Mechanical Engineering, 2006, 17(S1): 43-45.
[18]房延, 郭远明. 深海液压油箱的设计[J]. 液压与气动, 2005(11): 13-15.
Fang Yan, Guo Yuanming. Design of Deep Sea Hydraulic Pressure Fuel Tank[J]. Chinese Hydraulics & Pneumatics, 2005(11): 13-15.
[19]顾临怡, 王峰, 陈鹰, 等. 基于开关液压源的深海水压型能量供给技术研究[J]. 机械工程学报, 2004, 40(5): 141-144.
Gu Linyi, Wang Feng, Chen Ying, et al. Research on Deep Sea Power Supply Technique from Seawater Pressure Based on Switchmode Hydraulic Power Supply[J]. Journal of Mechanical Engineering, 2004, 40(5): 141-144.
[20]周博, 陈家旺, 顾临怡. 深海高压环境下的密封材料变形特性分析[J]. 中国机械工程, 2010, 21(12): 1481-1484.
Zhou Bo, Chen Jiawang, Gu Linyi. Analysis on Self-compressibility of Sealing Materials under High Pressure in Deep-sea[J]. China Mechanical Engineering, 2010, 21(12): 1481-1484.
[21]赵宏强, 何清华, 陈欠根, 等. 7000 m深海钴结壳取芯器研究[J]. 中国工程机械学报,2005, 3(4): 425-430.
Zhao Hongqiang, He Qinghua, Chen Qiangen, et al. Research of 7000 m Deep-sea Cobalt Sampler[J]. Chinese Journal of Construction Machinery, 2005, 3(4): 425-430.
[22]吴怀超, 金波, 杨灿军, 等. 一种深海液压系统压力补偿装置的建模与应用[J]. 液压与气动, 2010(5): 46-48.
Wu Huaichao, Jin Bo, Yang Canjun, et al. Modeling and Application of Pressure Compensation Device of the Deep-sea Hydraulic System[J]. Chinese Hydraulics & Pneumatics, 2010(5): 46-48.
[23]艾勇福. 深海中深孔岩芯取样钻机监控系统设计与实现[D]. 杭州：杭州电子科技大学, 2009.
[24]张浩立, 邓智勇, 罗友高. 潜水器布放回收系统发展现状[J]. 船舶科学技术, 2012(4): 3-6.
Zhang Haoli, Deng Zhiyong, Luo Yougao. Development Actuality of Submarine Launch and Recovery System[J]. Ship Science and Technology, 2012(4): 3-6.
[25]吴崇健, 余建勋, 张新宇, 等. 潜水器通用型布放系统: 中国, Zl200810048696.X[P]. 2008-08-05.
[26]张浩立, 邓智勇, 宋诚, 等. 一种新型集成式潜水器吊放回收系统的研制[J]. 船舶科学技术, 2010(7): 117-121.
Zhang Haoli, Deng Zhiyong, Song Cheng, et al. The Design of a New Kind of Integration Submarine Lift-recovery System[J]. Ship Science and Technology, 2010(7): 117-121.
[27]刘相春. A形架式潜水器收放系统设计研究[J]. 船舶, 2007(5): 52-57.
Liu Xiangchun. Designof A-frame Submersible Launch & Recovery System[J]. Ship & Boat, 2007 (5): 52-57.
[28]陈育喜, 张竺英. 深海ROV脐带缆绞车设计研究[J]. 机械设计与制造, 2010(4): 39-41.
Chen Yuxi, Zhang Zhuying. Research on the Design of Deep-sea ROV Umbilical Winch[J]. Machinery Design & Manufacture, 2010(4): 39-41.
[29]邓智勇, 张浩立, 罗友高, 等. 机械式自动对接释放装置: 中国, Zl200910061102.3[P]. 2009-03-13.
[30]张浩立, 邓智勇, 等. 恒张力自动收放和排缆的脐带缆绞车装装置. 中国, Zl200920085244.9[P]. 2009-04-24.
[31]胡火焰, 邓智勇, 张浩立. 潜水器吊放回收装置液压系统设计[J]. 液压与气动, 2009(8): 57-59.
Hu Huoyan, Deng Zhiyong, Zhang Haoli. The Design of Hydraulic System for Submarine Lift-recovery Equipment[J]. Chinese Hydraulics & Pneumatics, 2009(8): 57-59.
[32]徐昱, 刘少军, 龙江志. 基于ADAMS的深海采矿系统的布放回收模拟[J]. 计算机仿真, 2004(3): 67-70.
Xu Yu, Liu Shaojun, Long Jiangzhi. Simulation of Launching Process of Collector in Deep Seabed Mining Based on ADAMS[J]. Computer Simulation, 2004(3): 67-70.
[33]Bianchi A, Garcin J, Tholosan O. A High Pressure Serial Samplerto Measure Microbial Activity in the Deep Sea[J]. Deep-sea Research(I), 1999, 46: 2129-2142.
[34]Jacobs P H. A New Rechargeable Dialysis Pore Water Samplerfor Monitoring Subaqueous In-situ Sediment Caps[J] .Water Research, 2002, 36: 3121-3129.
[35]Dimeo C A, Wakefield J R, Craig C S. A New Devicefor Sampling Small Volumes of Water from Marine Micro-environments[J]. Deep-sea Research(I), 1999, 46: 1279-1287.
[36]Masayuki K, Satoru U, Masato Y. Pressure Temperature Core Sampler(PTCS)[J]. Journal of the Japanese Association for Petroleum Technology, 2006, 71(1): 139-147.
[37]Pettigrew T L. Design and Operation of a Wireline Pressure Core Sample(Pcs)[R]. Galveston: Texas A&M University, 1992.
[38]Dickens G R, Paull C K, Wall A P, et al. Direct Measurement of in Situ Methane Quantities in a Large Gas Hydrate Reservoir[J]. Nature, 1997, 385(6615): 426-428.
[39]Fugro-Mcclelland Marine Geosciences Incorporation. Geotechnical Investigation Chevron Gulf of Mexico Gas Hydrates Jip Block13 and 14, At Water Valley Area Block 151, Keathley Can Yon Area Gulf of Mexico[R]. Houston: Chevron Texaco Energy Technology Company Houston, 2006.
[40]Rothfuss M. Retrieval of Cores from Marine Gas Hydrates under in Situ Conditions with Hyace Rotary Core[C]//Proceedings of the Dgmk Spring Conference.Celle, Germany, 2003: 565-576.
[41]耿雪樵, 徐行, 刘方兰, 等. 我国海底取样设备的现状与发展趋势[J]. 地质装备, 2009, 10(4): 11-16.
Geng Xueqiao, Xu Xing, Liu Fanglan, et al. The Current Status and Development Trends of Marine Sampling Equipment[J]. Equipment for Geotechnical Engineering, 2009, 10(4): 11-16.
[42]李世伦, 程毅, 秦华伟, 等. 重力活塞式天然气水合物保真取样器的研制[J]. 浙江大学学报(工学版), 2006, 40(5): 888-892.
Li Shilun, Cheng Yi, Qin Huawei, et al. Development of Pressure Piston Corer for Exploring Natural Gas Hydrates[J]. Journal of Zhejiang University(Engineering Science), 2006, 40(5): 888-892.
[43]黄中华, 金波, 刘少军,等. 深海微生物取样器保压过程研究[J]. 浙江大学学报(工学版), 2006, 40(5): 878-882.
Huang Zhonghua, Jin Bo, Liu Shaojun,et al. Research on Deep Sea Microbe Sampler Pressure-retaining Process[J]. Journal of Zhejiang University(Engineering Science), 2006, 40(5): 878-882.
[44]秦华伟. 海底表层样品低扰动取样原理及保真取样研究[D]. 杭州:浙江大学,2005.
[45]李峰. 深海沉积物无扰动保压取样技术的研究[D]. 杭州:浙江大学,2008.
[46]万步炎, 章光, 黄筱军. 深海硬岩岩芯保真取样技术的研究[J]. 矿业研究与开发, 2009 (6): 47-50.
Wan Buyan, Zhang Guang, Huang Xiaojun. Researchon Deep Sea Pressure-tight Rock Core Sampling Technology[J]. Mining Research and Development, 2009(6): 47-50.