China Mechanical Engineering ›› 2014, Vol. 25 ›› Issue (23): 3125-3131.

Previous Articles     Next Articles

A New Type of Dynamic Vibration Absorber for Pipe System Vibration Suppression

Chen Guo1;Cheng Xiaoyong1;Liu Minghua2;Luo Yun2;Hou Minli2;Zhao Bin1   

  1. 1.Nanjing University of Aeronautics and Astronautics,Nanjing,210016
    2.Chengdu Aircraft Industrial (Group) Co.,Ltd.,Chengdu,610092
  • Online:2014-12-10 Published:2014-12-12
  • Supported by:
    National Natural Science Foundation of China(No. 61179057)

用于管道减振的新型动力吸振器

陈果1;程小勇1;刘明华2;罗云2;侯民利2;赵斌1   

  1. 1.南京航空航天大学,南京,210016
    2.成都飞机工业(集团)有限责任公司,成都,610092
  • 基金资助:
    国家自然科学基金资助项目(61179057);成都飞机工业(集团)有限责任公司资助项目

Abstract:

A new spring type of dynamic vibration absorber for pipe system vibration suppression was designed. The absorber connected with the main system by bolted connections, and leaf spring and mass were used to constitute the spring-mass system. The parameters of the vibration absorber  were selected  firstly,  then the finite  element model of the pipeline system was set up to analyze the harmonic response between pre-and post installation of the damper; finally, experiments  were completed to confirm the system. The results show that: the vibration in the resonant frequency will be reduced 90% with the dynamic vibration absorber, the effects of block with the same mass as damper were compared, and the results show that vibration damping has a greater effect than that of mass. This designed dynamic vibration absorber can reduce pipeline vibration levels significantly, and have a good damping effect.

Key words: dynamic vibration absorber, pipeline vibration, mechanic design, vibration attenuation, leaf spring

摘要:

设计了一种适用于管路系统减振的弹簧片式动力吸振器。该吸振器在结构上采用螺栓与管路进行连接,采用弹簧片-质量块构成弹簧-质量系统对振动进行吸收,具有结构简单、调频和安装方便的优点。对动力吸振器进行了结构设计并进行了参数选择,建立管路有限元模型分析了安装减振器前后系统的谐响应,最后进行了实验验证。实验结果表明,动力吸振器将共振频率下的振动降低了90%以上,与相同质量大小的质量块的减振效果的比较表明,吸振器的减振效果明显优于质量块的减振效果。

关键词: 动力吸振器, 管路振动, 结构设计, 减振, 弹簧片

CLC Number: