[1]葛剑敏,刘春辉,郑联珠. 软(硬)路面行驶车辆轮胎模型分析[J]. 轮胎工业,2001(21): 73-80.
Ge Jianmin, Liu Chuhui, Zheng Lianzhu. Analysis of Vehicle Tire on Soft (or Hard)Road[J]. Tire Industry, 2001(21): 73-80.
[2]孙蓓蓓, 张晓阳, 王戬. 基于轮胎与地面接触模型的非公路车辆平顺性[J]. 东南大学学报, 2006, 36(6): 938-940.
Sun Beibei, Zhang Xiaoyang,Wang Jian. Ride Comfort of Off-road Vehicle Based on Tire-terrain Interaction Model[J]. Journal of Southeast University, 2006,36(6): 937-940.
[3]Oraveca H A, Zenga X, Asnani V M. Design and Characterization of GRC-1: a Soil for Lunar Terramechanics Testing in Earth-ambient Conditions[J]. Journal of Terramechanics, 2010,47(6): 361-377.
[4]Pazooki A, Rakheja S, Cao Dongpu. Modeling and Validation of Off-road Vehicle Ride Dynamics[J]. Mechanical Systems and Signal Processing, 2012,28: 679-695.
[5]Ding Liang, Yoshida Kazuya, Nagatani Keiji. Parameter Identification for Planetary Soil Based on a Decoupled Analytical Wheel-Soil Interaction Terramechanics Model[C]//Intelligent Robots and Systems.St. Louis, MO: IEEE, 2009: 4122-4127.
[6]张晓阳, 孙蓓蓓, 许志华,等. 考虑地面变形特性的车辆地面耦合系统的建模与仿真[J]. 机械工程学报, 2009,45(12): 212-216.
Zhang Xiaoyang, Sun Beibei, Xu Zhihua. Modeling and Simulation of Vehicle Terrain Coupling System Considering Terrain Deformable Characteristic[J]. Journal of Mechanical Engineering, 2009, 45(12): 212-216.
[7]Liu C H, Wong J Y. Numerical Simulations of Tire-soil Interaction Based on Critical State Soil Mechanics[J]. Journal of Terramechanics, 1996, 33(5): 209-221.
[8]庄继德. 计算汽车地面力学[M].北京:机械工业出版社,2001.
[9]Bekker M G. Introduction to The Terrain-vehicle System[M]. Ann Arbor: The University of Michigan Press, 1969.
[10]余志生.汽车理论[M].北京:机械工业出版社,2000.
[11]张永林,钟毅芳.车辆路面不平度输人的随机激励时域模型[J].农业机械学报,2004,35(2):9-12.
Zhang Yonglin, Zhong Yifang. Time Domain Model of Road Undulation Excitation to Vehicles[J]. Transactions of the Chinese Society for Agricultural Machinery,2004,35(2):9-12.
[12]赵旗,车华军,李杰.基于遗传算法的汽车行驶平顺性优化仿真[J].机械设计与制造,2009(3):203-205.
Zhao Qi, Che Huajun, Li Jie. Automobile Ride Optimization Simulation Based on Genetic Algorithm[J]. Machinery Design and Manufacture, 2009(3):203-205. |