[1]Cameron A.润滑理论基础[M].汪一麟,沈继飞,译.北京:机械工业出版社,1980.
[2]Seetharaman S, Kahraman A. Load-independent Spin Power Losses of a Spur Gear Pair:Model Formulation[J].ASME Journal of Tribology,2009,131:022201.
[3]Changenet C,Velex P.A Model for the Prediction of Churning Losses in Geared Transmissions-preliminary Results[J]. ASME Journal of Mechanical Design,2007,129(1):128-133.
[4]Bones R J.Churning Losses of Discs and Gears Running Partially Submerged in Oil[C]//Proceedings of the ASME 5th International Power Transmission and Gearing Conference.Chicago, 1989,201(1):355-359.
[5]Devin R,Hilty B S.An Experimental Investigation of Spin Power Losses of Planetary Gear Sets[D].Columbus:The Ohio State University,2010.
[6]Seetharaman S,Kahraman A,Moorhead M D,et al.Oil Churning Power Losses of a Gear Pair-experiments and Model Validation[J].Journal of Tribology,2009,131(2):022202.
[7]Anderson N E, Loewenthal S H. Design of Spur Gears for Improved Efficiency[J]. ASME J. Mech.,1982,104:767-774.
[8]尤金 E M.齿轮油泵[M].李镛泉,李扬之,译.北京:机械工业出版社,1960.
[9]陈立锋,吴晓铃,秦大同,等.齿轮啮合过程摩擦功耗研究[J].中国机械工程,2010,21(16):1911-1915.
Chen Lifeng,Wu Xiaoling,Qin Datong,et al.Study on Frictional Power Losses of Spur Gear[J].China Mechanical Engineering, 2010,21(16):1911-1915.
[10]孟凡英.流体力学与流体机械[M].北京:煤炭工业出版社,2006.
[11]赵学瑞,廖其奠.粘性流体力学[M].北京:机械工业出版社,1983.
[12]Mizutani H.Power Loss of Long Addendum Spur Gears with Large Chamfer on Tooth Tip-ends[C]//Fourth World Congress on Gearing and Power Transmission. Paris:1999:213-225.
[13]Pechersky M J.Wittbrodt M J.An Analysis of Fluid Flow between Meshing Spur Gear Teeth[C]//Proceedings of the ASME Fifth International Power Transmission and Gearing Conference.Chicago,1989:335-342.
[14]Akin L S,Townsend J P,Mross J J.Study of Lubricant Jet Flow Phenomenon in Spur Gears[J].ASME J. Lubr. Technol., 1975, 97:288-295.
[15]Luke P,Olver A.A Study of Churning Losses in Dip-lubricated Spur Gears[J].Proc. Inst. ech. Eng. J. Aerospace Eng., Part G, 1999,213:337-346.
[16]姚建初,陈义保,周济,等.齿轮传动啮合效率计算方法的研究[J].机械工程学报,2001,37(11):18-21,27.
Yao Jianchu,Chen Yibao,Zhou Ji,et al.Study on a Method for Calculating Gearing Meshing Efficiency[J].Chinese Journal of Mechanical Engineering,2011,37(11):18-21,27.
[17]范曾智,赵汝焘,王良壁.齿轮传动系统的搅油损失、散热量及传动效率的预测[J].兰州铁道学院学报,1994,13(1):34-40.
Fan Zengzhi,Zhao Rutao,Wang Liangbi.Prediction of Churning Loss,Abduction of Heat and Efficiency of Gear Box[J]. Journal of Lanzhou Railway Institute,1994,13(1):34-40. |