China Mechanical Engineering ›› 2014, Vol. 25 ›› Issue (16): 2178-2183.
Previous Articles Next Articles
Jiang Lei1;Li Zhuang1;Li Xiangbiao1;Zhou Liangming2;Duan Changde3;Ding Guofu1
Online:
2014-08-26
Published:
2014-09-11
Supported by:
江磊1;李庄1;李相标1;周良明2;段昌德3;丁国富1
基金资助:
CLC Number:
Jiang Lei, Li Zhuang, Li Xiangbiao, Zhou Liangming, Duan Changde, Ding Guofu. Rotation Angle Solution for Post-processing of Five-axis Machine Tools with Infinite Rotating C-axis Worktable[J]. China Mechanical Engineering, 2014, 25(16): 2178-2183.
江磊, 李庄, 李相标, 周良明, 段昌德, 丁国富. 无限旋转C轴工作台结构的五轴机床后置转角求解[J]. 中国机械工程, 2014, 25(16): 2178-2183.
[1]Lee R S, She C H. Developing a Postprocessor for Three Types of Five-axis Machine Tools[J]. International Journal of Advanced Manufacturing Technology, 1997, 13(9): 658-665. [2]She C H, Chang C C. Design of a Generic Five-axis Postprocessor Based on Generalized Kinematics Model of Machine Tool[J]. International Journal of Machine Tools & Manufacture, 2007, 47(3/4): 537-545. [3]She C H, Chang C C. Development of a Five-axis Postprocessor System with a Nutating Head[J]. Journal of Materials Processing Technology, 2007,187-188(12): 60-64. [4]She C H, Huang Z T. Postprocessor Development of a Five-axis Machine Tool with Nutating Head and Table Configuration[J]. International Journal of Advanced Manufacturing Technology, 2008,38(7/8): 728-740. [5]Yun J D, Jung Y H, Tae D B, et al.A Geometric Postprocessing Method Using Joint Positions of a 5-axis Machine[C]//Proceedings of the World Congress on Engineering and Computer Science.San Francisco: International Association of Engineers, 2009: 679-684. [6]彭芳瑜,陈涛,周云飞,等.七轴五联动车铣机床的结构建模及其求解[J]. 机械与电子,2003,21(2):13-16. Peng Fangyu,Chen Tao, Zhou Yunfei, et al. Mechanism Modeling and Solving for Lathe-Mill Machine with Seven-five Axis[J]. Machinery & Electronics, 2003, 21(2):13-16. [7]左晓明,吴海兵,陈小岗.非正交双转台加工中心五轴定位铣削的后置处理与仿真验证[J]. 机械科学与技术,2012,32(1):154-158. Zuo Xiaoming, Wu Haibing,Chen Xiaogang. Postprocessor and Simulation of 5-axis Fixed-position Milling for Non-orthogonal Machining Center of Table/Table-rotating Type[J]. Mechanical Science and Technology for Aerospace Engineering, 2012, 32(1): 154-158. [8]Jung Y H, Lee D W, Kim J S, et al. NC Post-processor for 5-axis Milling Machine of Table-rotating/tilting Type[J]. Journal of Materials Processing Technology, 2002(130/131): 641-646. [9]代星,熊蔡华,丁汉. 双转台式五轴机床后置处理中的最优选解问题研究[J]. 装备制造技术, 2012, 40(2):10-12. Dai Xing, Xiong Caihua, Ding Han. Research on Solution Determination in the Post-processing Process for a Five-axis Machine of Dual Table Type[J]. Equipment Manufacturing Technology, 2012, 40(2): 10-12. [10]段春辉. 五轴联动数控机床通用后置处理系统研制[D]. 成都: 西南交通大学, 2007. [11]黎坚,周艳红,龚海,等.多坐标数控机床通用运动学模型的建立[J]. 中国机械工程, 1999, 10(1):4-6. Li Jian, Zhou Yanhong, Gong Hai, et al. A General Kinematics Model for Multi-axis NC Machines[J]. China Mechanical Engineering, 1999, 10(1):4-6. |
[1] | WENG Jian, ZHUANG Kejia, PU Donglin, DING Han, . Plunge Milling of Titanium Alloys Based on Machine Learning and Multi-objective Optimization [J]. China Mechanical Engineering, 2021, 32(07): 771-777. |
[2] | PEI Zhi, DAI Xu, YUAN Yilun, YI Wenchao, CHEN Yong. Dynamic Resource Allocation of Manufacturing Network for Emergency Equipment [J]. China Mechanical Engineering, 2021, 32(07): 839-848. |
[3] | GUO Baosu;ZHUANG Jichao;ZHANG Qin;WU Fenghe. Color Difference Detection of Polycrystalline Wafers Based on Multi-component Convolution Neural Network [J]. China Mechanical Engineering, 2021, 32(03): 297-304. |
[4] | WANG Yingcong1;ZHANG Ling1;XIAO Renbin2. A Flexible Position Selection Algorithm for Solving ECPP [J]. China Mechanical Engineering, 2021, 32(03): 305-313. |
[5] | TIAN Sukun1;DAI Ning1;YUAN Fulai1;SUN Yuchun2;YU Qing3;CHENG Xiaosheng1. Functional Occlusal Surface Morphology Design Method for Missing Teeth Based on CGAN [J]. China Mechanical Engineering, 2021, 32(03): 331-340. |
[6] | QIU Yongtao1;JI Weixi1,2;ZHANG Chaoyang1,2. Multi-objective Job Shop Scheduling Based on Hybrid Evolutionary Algorithm and Knowledge [J]. China Mechanical Engineering, 2020, 31(24): 2979-2987. |
[7] |
SUN Dianzhu1;SHEN Jianghua1;JIA Zongfu1;LI Yanrui2;LIN Wei1.
Scattering Point Cloud Local Topography Frame Quantization and Feature Recognition Method
[J]. China Mechanical Engineering, 2020, 31(19): 2332-2339.
|
[8] | WANG Guan1;ZHANG Qian2;KOU Linyuan1;LIU Zhiwen3;LI Shikang3. Nonlinear Topology Optimization of Continuum Structures Based on HCA Algorithm [J]. China Mechanical Engineering, 2020, 31(18): 2161-2173. |
[9] | DAI Wen1;ZHANG Chaoyong1;MENG Leilei1;XUE Yanshe1;XIAO Pengfei1;YIN Yong2. Prediction Model of Milling Cutter Wear Status Based on Deep Learning [J]. China Mechanical Engineering, 2020, 31(17): 2071-2078. |
[10] | YUE Caixu;LIU Xin;LIU Zhibo;XIE Na;WANG Yanwu. Tool Optimization for Splicing Die Milling Processes Based on Finite Element Simulation [J]. China Mechanical Engineering, 2020, 31(17): 2085-2094. |
[11] | PANG Shibao1;GUO Shunsheng1;WANG Lei1;LI Xixing2. Construction Method of Workshop Manufacturing Service Collaboration Chains for Mass Personalization Manufacturing [J]. China Mechanical Engineering, 2020, 31(17): 2104-2111. |
[12] | ZHANG Wenxu, XIAO Renbin, LIN Wenguang. Review Data Driven Customer Need Model Research Based on Product Performance Lexicon [J]. China Mechanical Engineering, 2020, 31(15): 1866-1876. |
[13] | WANG Falin, GUO Xuepeng, LI Zhinong, SONG Likang. Automatic Extraction Method for Corresponding Relationship among Endpoint-to-location of Cable Wiring under Coordinate System Guidance [J]. China Mechanical Engineering, 2020, 31(14): 1708-1716. |
[14] | WEI Dinghui;WANG Huifen;LIU Linyan. Visual Monitoring System for Small and Medium-sized Automatic Production Lines [J]. China Mechanical Engineering, 2020, 31(11): 1351-1359. |
[15] | JIANG Shaofei;WU Tianji;PENG Xiang;LI Jiquan;LI Zhi;SUN Tao. Data Driven Fault Diagnosis Method Based on XGBoost Feature Extraction [J]. China Mechanical Engineering, 2020, 31(10): 1232-1239. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||