Design for High-speed Ball Screw Running-life Test Machine Based on Linear Motor

Abstract

Abstract:

A high-speed ball screw running-life test machine based on a linear motor was designed according to the testing requirements for the high-speed ball screw. A high-speed ball screw running-life test machine which used the linear motor as the loading mechanism, the rotation servo motor for the screw drive mechanism and the programmable multi-axis controller as motion controller, was designed and met the testing requirements of life testing and related parameters of the ball screw in the case of the long-running high-speed, high acceleration, big load under the conditions of continuous stable varying loading. The test results demonstrate the feasibility of the system.

Key words: ball screw, linear motor, programmable multi-axis controller, life testing

摘要：

针对高速滚珠丝杠副性能指标的测量需求，设计了一套基于直线电机的高速滚珠丝杠副寿命测试试验系统，系统以直线电机为加载机构、旋转伺服电机为丝杠驱动机构、多轴运动控制卡为运动控制器。据此系统设计的滚珠丝杠副高速加载跑合寿命试验机在连续稳定变负载的情况下，可以对滚珠丝杠在高速、高加速度、大负荷等条件下进行长时间运行测试，满足寿命试验机对滚珠丝杠副寿命试验和相关参数的测试要求。试验结果证明了系统的可行性。

关键词: 滚珠丝杠副, 直线电机, 多轴运动控制卡, 寿命试验

CLC Number:

TH132.1

Tong Liang, Wang Zhun. Design for High-speed Ball Screw Running-life Test Machine Based on Linear Motor[J]. China Mechanical Engineering, 2014, 25(13): 1711-1714.

童亮, 王准. 基于直线电机的高速滚珠丝杠副寿命试验机设计[J]. 中国机械工程, 2014, 25(13): 1711-1714.

References

[1]曹建国,陈世平.实现滚珠丝杠螺母副高速化的技术措施[J].机床与液压,2005(5):54-55.
Cao Jianguo,Chen Shiping.Technology Measures of the Ball Screws for High Speed[J]. Hydromechatronics Engineering, 2005(5): 54-55.
[2]范大鹏,范世珣,鲁亚飞,等.数控机床高性能传动部件控制技术的研究进展[J].中国机械工程, 2011,22(11):1377-1385.
Fan Dapeng,Fan Shixun,Lu Yafei,et al.Current Status of Control Research on NC Machine Transmission Components[J]. China Mechanical Engineering,2011,22(11):1377-1385.
[3]宋现春,张刚.滚珠丝杠副摩擦力矩测量系统的研制[J].山东建筑大学学报,2007,22(3):240-242.
Song Xianchun,Zhang Gang.Development on Measuring System for Frictional Torque of Ball Screw[J]. Journal of Shandong Jianzhu University, 2007,22(3):240-242.
[4]康献民,傅卫平,王大承,等.精密滚珠丝杠副摩擦力矩波动的分析与测试[J].中国机械工程,2010,21(4):400-405.
Kang Xianmin,Fu Weiping,Wang Dacheng,et al.Analysis and Test of Fluctuating Friction Torque in High-precision Ball Screw[J].China Mechanical Engineering,2010,21(4):400-405.
[5]肖正义，焦洁.高速滚珠丝杠副的研发和测试技术[J].制造技术与机床,2004(4):95-98.
Xiao Zhengyi,Jiao Jie.Development and Test of High Speed Ball Screw Units[J].Manufacturing Technology & Machine Tool,2004(4):95-98.
[6]宋现春,刘剑，王兆坦，等.高速滚珠丝杠副综合性能试验台的研制开发[J].工具技术,2005(7):34-36.
Song Xianchun,Liu Jian,Wang Zhaotan,et al.Research and Development of Test System of Conbination Property of High-Speed Ball Screw Unit[J].Tool Engineering,2005(7):34-36.
[7]孙玉敏.基于PMAC的运动控制系统的研究[D].北京:北方工业大学, 2007.
[8]马仕龙.滚珠丝杠副高速化的技术对策[J].制造技术与机床,2009(9):113-115.
Ma Shilong.Technical Strategy of High-speed Ballscrew Units[J].Manufacturing Technology & Machine Tool,2009(9):113-115.
[9]Gordon S,Hillery M T. Development of a High-speed CNC Cutting Machine Using Linear Motors[J].Journal of Materials Processing Technology,2005, 166:321-329.
[10]赖国庭，吴玉厚，富大伟.基于PMAC的直线电机速度/加速度前馈控制[J].控制工程，2003，10(6)：42-45.
Lai Guoting,Wu Yuhou,Fu Dawei.Velocity and Acceleration Feedback Control for Linear Motor Based on PMAC[J].Journal of Control Engineering of China,2003,10(6):42-45.

[1]	HU Mian;DING Xiaohong. Numerical and Experimental Investigations of Thermal Performance for Heat Pipe Ball Screws [J]. China Mechanical Engineering, 2020, 31(20): 2445-2453.
[2]	ZHANG Yaoman;BAO Fengxu;QI Peining. Modeling Method for Thermal Characteristics of Ball Screw Pairs [J]. China Mechanical Engineering, 2020, 31(20): 2486-2490,2496.
[3]	LIN Xiankun1,2;ZHANG Liming1. Acceleration Saturation Performance Optimization Method of Direct Feed Drive Systems Using Hybrid PLS Regression and PSO [J]. China Mechanical Engineering, 2019, 30(18): 2224-2230.
[4]	ZHU Jianmin;ZHENG Zhouyang;HU Yujia;ZHOU Yanan. Radial Dynamic Characteristic Parameter Identification of Rolling Joints in Ball Screw Feed Systems [J]. China Mechanical Engineering, 2018, 29(04): 441-449.
[5]	LI Bingran1;ZHANG Hui1,2;YE Peiqing1,2,3. Optimization of Hall Position Sensor for Permanent Magnet Synchronous Linear Motors [J]. China Mechanical Engineering, 2017, 28(24): 2913-2918.
[6]	KOU Farong;LIANG Jin;WEI Dongdong;WANG Xing;TIAN Lei. Research on a Parallel Type Semi-active Suspension Actuator [J]. China Mechanical Engineering, 2017, 28(19): 2318-2324.
[7]	HUANG Jun, WANG Zhenhua, YUAN Juntang, BIAN Wei. Axial Dynamic Stiffness Identification and Analysis of Ball Screw [J]. China Mechanical Engineering, 2017, 28(10): 1149-1155.
[8]	YI Jun, CAI Heng, ZHANG Dong, ZHANG Daode. Research on Improved BP-PID Steering Control Systems [J]. China Mechanical Engineering, 2017, 28(10): 1221-1226.
[9]	Chen Yongjiang, Tang Wencheng, Gan Weimin, Meng Haodong. Study on Friction of Precision Ball Screws Based on Creep Force Models [J]. China Mechanical Engineering, 2016, 27(02): 178-186.
[10]	Lin Xiankun, Li Peixiang, Zhu Lin. Servo Parameter Tuning Method for Direct Feed Drive Based on Dynamic Stiffness Evaluation [J]. China Mechanical Engineering, 2015, 26(18): 2501-2505.
[11]	Lan Yipeng, Liu Yufei. Research on Magnetic Levitation Permanent Magnet Linear Motor and Its Control System [J]. China Mechanical Engineering, 2015, 26(13): 1815-1819.
[12]	Dong Wutao;Nie Songlin. Research on Motion Planning of Linear Motor Driven Piston Pump [J]. China Mechanical Engineering, 2014, 25(8): 1080-1084.
[13]	Ning Jianrong, Xia Jiakuan, Yu Ling, Li Tiejun. Flexible Electromechanical Coupling Dynamic Characteristics Analysis on Permanent Magnet Linear Feed System [J]. China Mechanical Engineering, 2014, 25(19): 2597-2602.
[14]	Zhou Yong;Wang Guoxian;Cao Xiaohua. A Measuring and Analysis Method to Identify Torsional Vibration Modes of Ball Screw Feed Drives [J]. China Mechanical Engineering, 2013, 24(23): 3240-3244.
[15]	LIU Yong-Beng, CHEN Zhen, RUI Zhi-Yuan. Design and Simulation of Gas-liquid Binary Cooling System for High-speed Ball Screw Units [J]. China Mechanical Engineering, 2013, 24(1): 95-98.